scholarly journals An Improved Stopband Dual-Band Filter Using Quad-Mode Stub-Loaded Resonators

Electronics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 142
Author(s):  
Min-Hang Weng ◽  
Chun-Yueh Huang ◽  
Shi-Wei Dai ◽  
Ru-Yuan Yang
Keyword(s):  
High Performance ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Design Procedure ◽  
Local Area ◽  
Dual Band ◽  
Area Network ◽  
Quarter Wavelength ◽  
Band Filter ◽  
Insertion Losses

In this paper, we present a dual-band microstrip bandpass filter (BPF) with an improved stopband, which was constructed by a quad-mode stub-loaded resonator (SLR). Since the SLR is able to produce multiresonance within a single unit, the area saving is significant. The proposed quad-mode SLR was implemented by two stubs allocated at symmetry places, thus the even-/odd-mode can be applied to analysis the resonance. Moreover, to shift the spurious passband, the step impedance structure was applied to shift the harmonic resonance to the higher frequency. Design procedure for high performance dual-band BPF is proposed, and filter examples were designed for wireless local area network (WLAN) of 2.4/5.2 GHz. The measured insertion losses, return losses and fractional bandwidths (FBW) are 1.43 dB, 10 dB, and 14.8% at 2.4 GHz and 1.34 dB, 10 dB, and 12.9% at 5.2 GHz. Moreover, by applying two quarter-wavelength stubs on the input/output ports, the passband selectivity with an isolation of 40 dB can be achieved. The simulation and measurement have a close match, verifying the design concept.

Analysis of electromagnetic absorption in new design of PIFA antenna using metamaterials

2021 ◽  
Author(s):  
Hamza Ben Hamadi ◽  
said ghnimi ◽  
Lassaad Latrach ◽  
Philippe Benech ◽  
Ali Gharsallah
Keyword(s):  
Human Body ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Dual Band ◽  
Area Network ◽  
Dual Band Antenna ◽  
Cubic Model ◽  
The Impact ◽  
Pifa Antenna

Abstract This paper presents the design, simulation and fabrication of a miniaturized wearable dual-band antenna on a semi-flex substrate; she is operable at 2.45/5.8 GHz for wireless local area network applications. The electrical and radiation characteristics of this proposed antenna were obtained by means of a technical of insertion of a slot to tune the operating frequencies. To study the impact of the electromagnetic radiation of the structure of the human body, it is necessary to minimize the back radiation towards the user. Therefore, in this work, a multi-band artificial magnetic conductor (AMC) was placed directly above a dual-band planar inverted F antenna to achieve a miniaturization with excellent radiation performance. The simulation results were designed and simulated using Studio commercial software (CST). A good agreement was achieved between the results of simulation and the experimental. The Comparison of measurement results indicates that the gain improved from 1,84 dB to 3,8 dB, in the lower band, and from 2,4 dB to 4,1 in the upper band, when the antenna is backed by the AMC plane. The front-to-back ratio of the AMC backed PIFA antenna was also enhanced. Then, to ensure that the proposed AMC is harmless to the human body, this prototype was placed on three-layer human tissue cubic model. It was observed that the through inclusion of plane AMC, the peak specific absorption rate (SAR) decreased to 1,45 and 1,1 W/kg at 2,45 and 5.8 GHz, respectively (a reduction of around 3,7 W/kg, compared with an antenna without (AMC).

Novel dual-band multistrip monopole antenna with defected ground structure for WLAN/IMT/BLUETOOTH/WIMAX applications

2013 ◽  
Vol 6 (1) ◽  
pp. 93-100 ◽  
Author(s):  
Jaswinder Kaur ◽  
Rajesh Khanna ◽  
Machavaram Kartikeyan
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Design Procedure ◽  
Monopole Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Simulation Results

In the present work, a novel multistrip monopole antenna fed by a cross-shaped stripline comprising one vertical and two horizontal strips has been proposed for wireless local area network (WLAN)/Industrial, Scientific, and Medical band (ISM)/International Mobile Telecommunication (IMT)/BLUETOOTH/Worldwide Interoperability for Microwave Access (WiMAX) applications. The designed antenna has a small overall size of 20 × 30 mm2. The goal of this paper is to use defected ground structure (DGS) in the proposed antenna design to achieve dual-band operation with appreciable impedance bandwidth at the two operating modes satisfying several communication standards simultaneously. The antenna was simulated using Computer Simulation Technology Microwave Studio (CST MWS) V9 based on the finite integration technique (FIT) with perfect boundary approximation. Finally, the proposed antenna was fabricated and some performance parameters were measured to validate against simulation results. The design procedure, parametric analysis, simulation results along with measurements for this multistrip monopole antenna using DGS operating simultaneously at WLAN (2.4/5.8 GHz), IMT (2.35 GHz), BLUETOOTH (2.45 GHz), and WiMAX (5.5 GHz) are presented.

Design and analysis of a metamaterial inspired dual band antenna for WLAN application

2019 ◽  
Vol 11 (4) ◽  
pp. 351-358 ◽  
Author(s):  
Priyanka Garg ◽  
Priyanka Jain
Keyword(s):  
Reflection Coefficient ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Dual Band ◽  
Band Spectrum ◽  
Area Network ◽  
Dual Band Antenna ◽  
Compact Size

AbstractIn this paper, a compact, low-profile, coplanar waveguide-fed metamaterial inspired dual-band microstrip antenna is presented for Wireless Local Area Network (WLAN) application. To achieve the goal a triangular split ring resonator is used along with an open-ended stub. The proposed antenna has a compact size of 20 × 24 mm2 fabricated on an FR-4 epoxy substrate with dielectric constant (εr) 4.4. The antenna provides two distinct bands I from 2.40 to 2.48 GHz and II from 4.7 to 6.04 GHz with reflection coefficient better than −10 dB, covering the entire WLAN (2.4/5.2/5.8 GHz) band spectrum. The performance of the proposed metamaterial inspired antenna is also studied in terms of the radiation pattern, efficiency, and the realized gain. A comparative study is also presented to show the performance of the proposed metamaterial inspired antenna with respect to other conventional antenna structures in terms of overall size, bandwidth, gain, and reflection coefficient. Finally, the antenna is fabricated and tested. The simulated results show good agreement with the measured results.

scholarly journals Compact Dual-Band Planar Inverted-e-Shaped Antenna Using Defected Ground Structure

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Wen Piao Lin ◽  
Dong-Hua Yang ◽  
Zong-De Lin
Keyword(s):  
Printed Circuit Board ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Impedance Matching ◽  
Local Area ◽  
Circuit Board ◽  
Dual Band ◽  
Area Network ◽  
Defected Ground Structure ◽  
Ground Structure

This paper presents a novel dual-band planar inverted-e-shaped antenna (PIEA) using defected ground structure (DGS) for Bluetooth and wireless local area network (WLAN) applications. The PIEA can reduce electromagnetic interferences (EMIs) and it is constructed on a compact printed circuit board (PCB) size of 10 × 5 × 4 mm3. Experimental results indicate that the antenna with a compact meandered slit can improve the operating impedance matching and bandwidths at 2.4 and 5.5 GHz. The measured power gains at 2.4 and 5.5 GHz band are 1.99 and 3.71 dBi; antenna efficiencies are about 49.33% and 55.23%, respectively. Finally, the good performances of the proposed antenna can highly promote for mobile device applications.

Sign in / Sign up

Export Citation Format

Share Document