scholarly journals Accurate and Efficient Evaluation of Bit Error Rate for Dynamic Directional Modulation for Standard Modulation Schemes

Electronics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 776
Author(s):  
Josep Parrón ◽  
Edith Cabrera-Hernandez ◽  
Alan Tennant

Directional modulation (DM) has been proposed as a technique to enhance physical layer security of wireless transmissions. In DM, the improvement of security is achieved by increasing the transmitted power in such a way that the bit error rate (BER) is degraded in the observation angles out of the desired secure direction. The performance of DM in terms of BER is typically evaluated by transmitting a stream of symbols for every observation angle, but this approach can be time consuming. In this communication, we propose an approach to evaluate, accurately and efficiently, the BER of dynamic DM (DDM) for standard modulation schemes. Several DDM configurations will be tested to illustrate the benefits and limitations of the evaluation method. The proposed approach is also used to present a non-iterative DDM synthesis with restrictions in the BER response.

Author(s):  
Yong Jin ◽  
Zhentao Hu ◽  
Dongdong Xie ◽  
Guodong Wu ◽  
Lin Zhou

AbstractAiming at high energy consumption and information security problem in the simultaneous wireless information and power transfer (SWIPT) multi-user wiretap network, we propose a user-aided cooperative non-orthogonal multiple access (NOMA) physical layer security transmission scheme to minimize base station (BS) transmitted power in this paper. In this scheme, the user near from BS is adopted as a friendly relay to improve performance of user far from BS. An energy harvesting (EH) technology-based SWIPT is employed at the near user to collect energy which can be used at cooperative stage. Since eavesdropper in the downlink of NOMA system may use successive interference cancellation (SIC) technology to obtain the secrecy information of receiver, to tackle this problem, artificial noise (AN) is used at the BS to enhance security performance of secrecy information. Moreover, semidefinite relaxation (SDR) method and successive convex approximation (SCA) technique are combined to solve the above non-convex problem. Simulation results show that in comparison with other methods, our method can effectively reduce the transmitted power of the BS on the constraints of a certain level of the secrecy rates of two users.


Sensors ◽  
2019 ◽  
Vol 19 (24) ◽  
pp. 5396
Author(s):  
Wei Zhang ◽  
Bin Li ◽  
Mingnan Le ◽  
Jun Wang ◽  
Jinye Peng

Directional modulation (DM), as an emerging promising physical layer security (PLS) technique at the transmitter side with the help of an antenna array, has developed rapidly over decades. In this study, a DM technique using a polarization sensitive array (PSA) to produce the modulation with different polarization states (PSs) at different directions is investigated. A PSA, as a vector sensor, can be employed for more effective DM for an additional degree of freedom (DOF) provided in the polarization domain. The polarization information can be exploited to transmit different data streams simultaneously at the same directions, same frequency, but with different PSs in the desired directions to increase the channel capacity, and with random PSs off the desired directions to enhance PLS. The proposed method has the capability of concurrently projecting independent signals into different specified spatial directions while simultaneously distorting signal constellation in all other directions. The symbol error rate (SER), secrecy rate, and the robustness of the proposed DM scheme are analyzed. Design examples for single- and multi-beam DM systems are also presented. Simulations corroborate that (1) the proposed method is more effective for PLS; (2) the proposed DM scheme is more power-efficient than the traditional artificial noise aided DM schemes; and (3) the channel capacity is significantly improved compared with conventional scalar antenna arrays.


2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Edith Annette Cabrera-Hernández ◽  
Josep Parron ◽  
Alan Tennant

Dynamic directional modulation (DDM) has already proven to be an efficient technique to achieve physical layer security in wireless communications. System architectures based on vector modulators provide a flexible framework to implement synthesis methods that allow us to obtain increased security and/or independent multichannel transmissions. However, the implementation of DDM with vector modulators requires an accurate calibration (amplitude and phase) of every component in the RF path. In this contribution, we study the sensitivity of the response of a DDM system based on commercial vector modulators showing how to correct the nonideal behavior of all the components thanks to the flexibility provided by the vector modulator.


Author(s):  
Wei Zhang ◽  
Bin Li ◽  
Mingnan Le ◽  
Jun Wang ◽  
Jinye Peng

Directional modulation (DM), as an emerging promising physical layer security (PLS) technique at the transmitter side with the help of an antenna array, has developed rapidly over decades. In this study, a DM technique using a polarization sensitive array (PSA) to produce the modulation with different polarization states (PSs) at different directions is investigated. A PSA, as a vector sensor, can be employed for more effective DM for an additional degree of freedom (DOF) provided in the polarization domain. The polarization information can be exploited to transmit different data streams simultaneously at the same directions, same frequency, but with different PSs in the desired directions to increase the channel capacity, and with random PSs off the desired directions to enhance PLS. The proposed method has the capability of concurrently projecting independent signals into different specified spatial directions while simultaneously distorting signal constellation in all other directions. The symbol error rate (SER), secrecy rate, and the robustness of the proposed DM scheme are analyzed. Design examples for single- and multi-beam DM systems are also presented. Simulations corroborate that 1) the proposed method is more effective for PLS; 2) the proposed DM scheme is more power-efficient than the traditional artificial noise aided DM schemes; and 3) the channel capacity is significantly improved compared with conventional scalar antenna arrays.


Sign in / Sign up

Export Citation Format

Share Document