scholarly journals Methods of Fast Analysis of DC–DC Converters—A Review

Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 2920
Author(s):  
Paweł Górecki ◽  
Krzysztof Górecki
Keyword(s):  
Steady State ◽  
Semiconductor Devices ◽  
Fast Analysis ◽  
Transient States ◽  
Scope Of Application ◽  
Thermal Phenomena

The paper discusses the methods of fast analysis of DC–DC converters dedicated to computer programmes. Literature methods of such an analysis are presented, which enable determination of the characteristics of the considered converters in the steady state and in the transient states. The simplifications adopted at the stage of developing these methods are discussed, and their influence on the accuracy of computations is indicated. Particular attention is paid to the methods of fast analysis of DC–DC converters, taking into account thermal phenomena in semiconductor devices. The sample results of computations of the DC–DC boost type converter obtained with the use of the selected methods are presented. The scope of application of particular computation methods and their duration times are discussed. Computations were performed with the use of SPICE and PLECS.

STEADY-STATE DETERMINATION OF FUEL-BOND NITROGEN IN DIESEL AND INDUSTRIAL GAS OIL

Clean Air ◽  
2007 ◽  
Vol 8 (4) ◽  
pp. 359-371
Author(s):  
A. Medeiros ◽  
R. Edenhofer ◽  
K. Lucka ◽  
H. Kohne
Keyword(s):  
Steady State ◽  
Gas Oil ◽  
State Determination

Automatic Determination of Optimal FIB Operations for Improved Circuit Probing and Fast Reconfiguration

2000 ◽  
Author(s):  
Romain Desplats ◽  
Timothee Dargnies ◽  
Jean-Christophe Courrege ◽  
Philippe Perdu ◽  
Jean-Louis Noullet
Keyword(s):  
Integrated Circuit ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Semiconductor Devices ◽  
Front Side ◽  
Automatic Determination ◽  
Metal Line ◽  
New Approach ◽  
Metal Layers

Abstract Focused Ion Beam (FIB) tools are widely used for Integrated Circuit (IC) debug and repair. With the increasing density of recent semiconductor devices, FIB operations are increasingly challenged, requiring access through 4 or more metal layers to reach a metal line of interest. In some cases, accessibility from the front side, through these metal layers, is so limited that backside FIB operations appear to be the most appropriate approach. The questions to be resolved before starting frontside or backside FIB operations on a device are: 1. Is it do-able, are the metal lines accessible? 2. What is the optimal positioning (e.g. accessing a metal 2 line is much faster and easier than digging down to a metal 6 line)? (for the backside) 3. What risk, time and cost are involved in FIB operations? In this paper, we will present a new approach, which allows the FIB user or designer to calculate the optimal FIB operation for debug and IC repair. It automatically selects the fastest and easiest milling and deposition FIB operations.

Calcium Budgets for Catchments as Interpreted by Strontium Isotopes

1989 ◽  
Vol 20 (2) ◽  
pp. 85-96 ◽  
Author(s):  
Gunnar Jacks ◽  
Göran Åberg ◽  
P. Joseph Hamilton
Keyword(s):  
Steady State ◽  
Forest Ecosystem ◽  
Coniferous Forest ◽  
Strontium Isotopes ◽  
Runoff Water ◽  
Weathering Rate ◽  
Weathering Rates ◽  
Exchangeable Calcium

Strontium isotopes in precipitation, soil and runoff water can be used to establish a ratio of wet plus dry deposited Sr to Sr released by weathering. This ratio is especially enhanced in areas with old acid Proterozoic rocks (0.6-2.5 Ga) and Archean rocks (>2.5 Ga). Since Sr and Ca behave in an analogous way in the coniferous forest ecosystem the results for Sr can be used for the determination of Ca. If the deposition of calcium can be calculated reasonably accurately the weathering rate can also be estimated. Five catchments have been investigated using this approach. Three of them seem to be close to a steady state, wherein the losses and gains of calcium to the system are equal. In the two southern-most catchments there seems to be an ongoing loss of exchangeable calcium. The loss by runoff occurs with sulphate being the dominant anion. Weathering rates of 1.5 to 4.8 kg Ca/ha year have been estimated.

A Graphical Method for Storage Coefficient Determination from Quasi-Steady State Flow Data

1996 ◽  
Vol 27 (4) ◽  
pp. 247-254 ◽  
Author(s):  
Zekâi Şen
Keyword(s):  
Steady State ◽  
Graphical Method ◽  
Pumping Test ◽  
Quasi Steady State ◽  
Flow Data ◽  
Steady State Flow ◽  
Storage Coefficient ◽  
State Flow ◽  
Aquifer Test

A simple, approximate but practical graphical method is proposed for estimating the storage coefficient independently from the transmissivity value, provided that quasi-steady state flow data are available from a pumping test. In the past, quasi-steady state flow distance-drawdown data have been used for the determination of transmissivity only. The method is applicable to confined and leaky aquifers. The application of the method has been performed for various aquifer test data available in the groundwater literature. The results are within the practical limits of approximation compared with the unsteady state flow solutions.

Operational Determination of the Activated Sludge Process Using Neural Networks

1992 ◽  
Vol 26 (9-11) ◽  
pp. 2461-2464 ◽  
Author(s):  
R. D. Tyagi ◽  
Y. G. Du
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Steady State ◽  
Activated Sludge ◽  
Feedforward Neural Network ◽  
Training Data ◽  
Activated Sludge Process

A steady-statemathematical model of an activated sludgeprocess with a secondary settler was developed. With a limited number of training data samples obtained from the simulation at steady state, a feedforward neural network was established which exhibits an excellent capability for the operational prediction and determination.

scholarly journals Steady State Response of Linear Time Invariant Systems Modeledby Multibond Graphs

2021 ◽  
Vol 11 (4) ◽  
pp. 1717
Author(s):  
Gilberto Gonzalez Avalos ◽  
Noe Barrera Gallegos ◽  
Gerardo Ayala-Jaimes ◽  
Aaron Padilla Garcia
Keyword(s):  
Steady State ◽  
Linear Time ◽  
Direct Determination ◽  
The State ◽  
Steady State Response ◽  
State Variables ◽  
Linear Time Invariant ◽  
State Response ◽  
Time Invariant

The direct determination of the steady state response for linear time invariant (LTI) systems modeled by multibond graphs is presented. Firstly, a multiport junction structure of a multibond graph in an integral causality assignment (MBGI) to get the state space of the system is introduced. By assigning a derivative causality to the multiport storage elements, the multibond graph in a derivative causality (MBGD) is proposed. Based on this MBGD, a theorem to obtain the steady state response is presented. Two case studies to get the steady state of the state variables are applied. Both cases are modeled by multibond graphs, and the symbolic determination of the steady state is obtained. The simulation results using the 20-SIM software are numerically verified.

scholarly journals Steady state determination of sarcoplasmic reticulum ATPase intermediates. Their acid lability.

1981 ◽  
Vol 256 (7) ◽  
pp. 3399-3404
Author(s):  
G.L. Alonso ◽  
D.M. Arrigo ◽  
M.V. Soliz-Frieldmeier
Keyword(s):  
Steady State ◽  
Sarcoplasmic Reticulum ◽  
State Determination

Resistance to Outflow of Cerebrospinal Fluid Determined by Bolus Injection Technique and Constant Rate Steady State Infusion in Humans

Neurosurgery ◽  
1985 ◽  
Vol 16 (3) ◽  
pp. 336-340 ◽  
Author(s):  
Michael Kosteljanetz
Keyword(s):  
Cerebrospinal Fluid ◽  
Steady State ◽  
Bolus Injection ◽  
Point Of View ◽  
Injection Technique ◽  
Communicating Hydrocephalus ◽  
Constant Rate ◽  
High Degree ◽  
Infusion Technique

Abstract Two methods for the determination of resistance to the outflow of cerebrospinal fluid, the bolus injection technique and the constant rate steady state infusion technique, were compared. Thirty-two patients with a variety of intracranial diseases (usually communicating hydrocephalus) were studied. There was a high degree of correlation between the resistance values obtained with the two methods, but values based on the bolus injection technique were systematically and statistically significantly lower than those obtained with the constant rate infusion test. From a practical point of view. both methods were found to be applicable in a clinical setting.

Sign in / Sign up

Export Citation Format

Share Document