scholarly journals Computer Model for Financial, Environmental and Risk Analysis of a Wind–Diesel Hybrid System with Compressed Air Energy Storage

Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4054 ◽  
Author(s):  
Youssef Benchaabane ◽  
Rosa Elvira Silva ◽  
Hussein Ibrahim ◽  
Adrian Ilinca ◽  
Ambrish Chandra ◽  
...  
Keyword(s):  
Risk Assessment ◽  
Renewable Energy ◽  
Energy Storage ◽  
Environmental Impact ◽  
Hybrid System ◽  
Computer Model ◽  
Net Present Value ◽  
Compressed Air ◽  
Compressed Air Energy Storage ◽  
The Impact

Remote and isolated communities in Canada experience gaps in access to stable energy sources and must rely on diesel generators for heat and electricity. However, the cost and environmental impact resulting from the use of fossil fuels, especially in local energy production, heating, industrial processes and transportation are compelling reasons to support the development and deployment of renewable energy hybrid systems. This paper presents a computer model for economic analysis and risk assessment of a wind–diesel hybrid system with compressed air energy storage. The proposed model is developed from the point of view of the project investor and it includes technical, financial, risk and environmental analysis. Robustness is evaluated through sensitivity analysis. The model has been validated by comparing the results of a wind–diesel case study against those obtained using HOMER (National Renewable Energy Laboratory, Golden, CO, United States) and RETScreen (Natural Resources Canada, Government of Canada, Canada) software. The impact on economic performance of adding energy storage system in a wind–diesel hybrid system has been discussed. The obtained results demonstrate the feasibility of such hybrid system as a suitable power generator in terms of high net present value and internal rate of return, low cost of energy, as well as low risk assessment. In addition, the environmental impact is positive since less fuel is used.

scholarly journals Computer Model for a Wind–Diesel Hybrid System with Compressed Air Energy Storage

Energies ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3542 ◽  
Author(s):  
Nicolas Martinez ◽  
Youssef Benchaabane ◽  
Rosa Elvira Silva ◽  
Adrian Ilinca ◽  
Hussein Ibrahim ◽  
...  
Keyword(s):  
Energy Storage ◽  
Hybrid System ◽  
Computer Model ◽  
Distributed Storage ◽  
System Optimization ◽  
Optimal Operation ◽  
Compressed Air ◽  
Energy Sources ◽  
Compressed Air Energy Storage ◽  
Diesel Generators

A hybrid system combines two or more energy sources as an integrated unit to generate electricity. The nature of the sources associated varies between renewable and/or non-renewable energies. Such systems are becoming popular as stand-alone power systems to provide electricity, especially in off grid remote areas where diesel generators act as primary energy source. Wind–diesel systems are among the preferred solutions for new installations, as well as the upgrade of existing ones. However, efforts to address technical challenges towards energy transformation for sustainable development are multiple. The use of energy storage systems is a solution to reduce energy costs and environmental impacts. Indeed, efficient and distributed storage not only allows the electricity grid greater flexibility in the face of demand variations and greater robustness thanks to the decentralization of energy sources, it also offers a solution to increase the use of intermittent renewables in the energy mix. Among different technologies for electrical energy storage, compressed air energy storage is proven to achieve high wind energy penetration and optimal operation of diesel generators. This paper presents a computer model for performance evaluation of a wind–diesel hybrid system with compressed air energy storage. The model has been validated by comparing the results of a wind–diesel case study against those obtained using HOMER software (National Renewable Energy Laboratory, Golden, CO, United States). Different operation modes of the hybrid system are then explored. The impact of hybridization on time and frequency of operation for each power source, fuel consumption and energy dissipation has been determined. Recommendations are made on the choice of key parameters for system optimization.

scholarly journals Numerical Investigation of the Influences of Wellbore Flow on Compressed Air Energy Storage in Aquifers

Geofluids ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-14 ◽  
Author(s):  
Yi Li ◽  
Keni Zhang ◽  
Litang Hu ◽  
Jinsheng Wang
Keyword(s):  
Energy Storage ◽  
Large Scale ◽  
Compressed Air ◽  
Energy Transfer Mechanism ◽  
Compressed Air Energy Storage ◽  
Screen Length ◽  
Aquifer Systems ◽  
Wide Availability ◽  
Reservoir Simulator ◽  
The Impact

With the blossoming of intermittent energy, compressed air energy storage (CAES) has attracted much attention as a potential large-scale energy storage technology. Compared with caverns as storage vessels, compressed air energy storage in aquifers (CAESA) has the advantages of wide availability and lower costs. The wellbore can play an important role as the energy transfer mechanism between the surroundings and the air in CAESA system. In this paper, we investigated the influences of the well screen length on CAESA system performance using an integrated wellbore-reservoir simulator (T2WELL/EOS3). The results showed that the well screen length can affect the distribution of the initial gas bubble and that a system with a fully penetrating wellbore can obtain acceptably stable pressurized air and better energy efficiencies. Subsequently, we investigated the impact of the energy storage scale and the target aquifer depth on the performance of a CAESA system using a fully penetrating wellbore. The simulation results demonstrated that larger energy storage scales exhibit better performances of CAESA systems. In addition, deeper target aquifer systems, which could decrease the energy loss by larger storage density and higher temperature in surrounding formation, can obtain better energy efficiencies.

scholarly journals Design of a New Compressed Air Energy Storage System with Constant Gas Pressure and Temperature for Application in Coal Mine Roadways

Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4188 ◽  
Author(s):  
Kangyu Deng ◽  
Kai Zhang ◽  
Xinran Xue ◽  
Hui Zhou
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Large Scale ◽  
Storage System ◽  
Coal Mines ◽  
Energy Storage System ◽  
Compressed Air ◽  
Compressed Air Energy Storage ◽  
Generation Capacity ◽  
Instability Energy

Renewable energy (wind and solar power, etc.) are developing rapidly around the world. However, compared to traditional power (coal or hydro), renewable energy has the drawbacks of intermittence and instability. Energy storage is the key to solving the above problems. The present study focuses on the compressed air energy storage (CAES) system, which is one of the large-scale energy storage methods. As a lot of underground coal mines are going to be closed in China in the coming years, a novel CAES system is proposed for application in roadways of the closing coal mines. The new system combines pumped-hydro and compressed-air methods, and features constant air pressure and temperature. Another specific character of the system is the usage of flexible bags to store the compressed air, which can effectively reduce air leakage. The governing equations of the system are derived, and the response of the system is analyzed. According to the equations, for a roadway with depth of 500 m and volume of 10,000 cubic meters, the power generation capacity of the CAES system is approximately 18 MW and the generating time is 1.76 h. The results show that the new CAES system proposed is reasonable, and provides a suitable way to utilize the underground space of coal mines.

Geological compressed air energy storage as an enabling technology for renewable energy in Ontario, Canada

2012 ◽  
Vol 69 (2) ◽  
pp. 350-359 ◽  
Author(s):  
James Konrad ◽  
Rupp Carriveau ◽  
Matt Davison ◽  
Frank Simpson ◽  
David S.-K. Ting
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Compressed Air ◽  
Compressed Air Energy Storage ◽  
Enabling Technology

Modelling the Dynamic Response and Loads of Floating Offshore Wind Turbine Structures With Integrated Compressed Air Energy Storage

2017 ◽  
Author(s):  
Tonio Sant ◽  
Daniel Buhagiar ◽  
Robert N. Farrugia
Keyword(s):  
Energy Storage ◽  
Dynamic Response ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Compressed Air ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Compressed Air Energy Storage ◽  
Floating Offshore Wind Turbine ◽  
The Impact

Nowadays there is increased interest to incorporate energy storage technologies with wind turbines to mitigate grid-related challenges resulting from the intermittent supply from large-scale offshore wind farms. This paper presents a new concept to integrate compressed air energy storage (CAES) in floating offshore wind turbine (FOWT) structures. The FOWT support structures will serve a dual purpose: to provide the necessary buoyancy to maintain the entire wind turbine afloat and stable under different met-ocean conditions and to act as a pressure vessel for compressed air energy storage on site. The proposed concept involves a hydro-pneumatic accumulator installed on the seabed to store pressurized deep sea water that is pneumatically connected to the floating support structure by means of an umbilical conduit. The present study investigates the technical feasibility of this concept when integrated in tension leg platforms (TLPs). The focus is on the impact of the additional floating platform weight resulting from the CAES on the dynamic response characteristics and loads when exposed to irregular waves. A simplified model for sizing the TLP hull for different energy storage capacities is initially presented. This is then used to evaluate the dynamic response of nine different TLP geometries when supporting the NREL1 5MW baseline wind turbine model. Numerical simulations are carried out using the marine engineering software tool ANSYS Aqwa©. The work provides an insight on how TLP structures supporting wind turbines may be optimised to facilitate the integration of the proposed CAES concept. It is shown that it is technically feasible to integrate CAES capacities on the order of Megawatt-Hours within TLP structures without compromising the stability of the floating system; although this would involve a substantial increase in the total structure weight.

scholarly journals Impact of compressed air energy storage system into diesel power plant with wind power penetration

2019 ◽  
Vol 9 (3) ◽  
pp. 1553
Author(s):  
Abdulla Ahmed ◽  
Tong Jiang
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power Plant ◽  
Power System ◽  
Wind Power ◽  
Power Supply ◽  
Renewable Energy Sources ◽  
Compressed Air ◽  
Energy Sources ◽  
Compressed Air Energy Storage

<p>The wind energy plays an important role in power system because of its renewable, clean and free energy. However, the penetration of wind power (WP) into the power grid system (PGS) requires an efficient energy storage systems (ESS). compressed air energy storage (CAES) system is one of the most ESS technologies which can alleviate the intermittent nature of the renewable energy sources (RES). Nyala city power plant in Sudan has been chosen as a case study because the power supply by the existing power plant is expensive due to high costs for fuel transport and the reliability of power supply is low due to uncertain fuel provision. This paper presents a formulation of security-constrained unit commitment (SCUC) of diesel power plant (DPP) with the integration of CAES and PW. The optimization problem is modeled and coded in MATLAB which solved with solver GORUBI 8.0. The results show that the proposed model is suitable for integration of renewable energy sources (RES) into PGS with ESS and helpful in power system operation management.</p>

Sign in / Sign up

Export Citation Format

Share Document