scholarly journals On Developing Techniques for Sharing Satellite Spectrum with Indoor Small Cells in 5G

Energies ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 748
Author(s):  
Rony Saha

In this paper, we present two spectrum sharing techniques for a multisystem, incorporating an integrated satellite-mobile system and an autonomous terrestrial-mobile system (iSMS/aTMS), namely orthogonal spectrum sharing (OSS) and non-orthogonal spectrum sharing (nOSS) techniques. aTMS consists of numerous small cells deployed in several buildings, and iSMS consists of a satellite station integrated with complementary ground component (CGC) stations deployed within buildings. By exploiting the high external wall penetration loss of a building, the iSMS spectrum is shared with small cells per building in OSS, and small cells per 3-dimensional (3D) cluster per building in nOSS. An interference management scheme, to avoid interference in apartments with collocated CGC stations and small cells, was developed and an optimal number of almost blank subframes (ABSs) per ABS pattern period (APP) was defined. System-level capacity, spectral efficiency, and energy efficiency performance metrics were derived. Furthermore, we present an algorithm for both OSS and nOSS techniques. With extensive simulation and numerical analysis, it is shown that the proposed nOSS significantly outperforms OSS in terms of spectral efficiency and energy efficiency, and both techniques can meet the expected spectral efficiency and energy efficiency requirements for the fifth-generation (5G) mobile networks.

Energies ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3825 ◽  
Author(s):  
Rony Kumer Saha

In this paper, we propose a technique to share the licensed spectrums of all mobile network operators (MNOs) of a country with in-building small cells per MNO by exploiting the external wall penetration loss of a building and introducing the time-domain eICIC technique. The proposed technique considers allocating the dedicated spectrum Bop per MNO only its to outdoor macro UEs, whereas the total spectrum of all MNOs of the country Bco to its small cells indoor per building such that technically any small indoor cell of an MNO can have access to Bco instead of merely Bop assigned only to the MNO itself. We develop an interference management strategy as well as an algorithm for the proposed technique. System-level capacity, spectral efficiency, and energy efficiency performance metrics are derived, and a generic model for energy efficiency is presented. An optimal amount of small indoor cell density in terms of the number of buildings L carrying these small cells per MNO to trade-off the spectral efficiency and the energy efficiency is derived. With the system-level numerical and simulation results, we define an optimal value of L for a dense deployment of small indoor cells of an MNO and show that the proposed spectrum sharing technique can achieve massive indoor capacity, spectral efficiency, and energy efficiency for the MNO. Finally, we demonstrate that the proposed spectrum sharing technique could meet both the spectral efficiency and the energy efficiency requirements for 5G mobile networks for numerous traffic arrival rates to small indoor cells per building of an MNO.


Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2828 ◽  
Author(s):  
Rony Kumer Saha

In this paper, we show how to realize numerous spectrum licensing policies by means of time-domain enhanced inter-cell interference coordination (eICIC) technique to share both the licensed and unlicensed spectrums with small cells in order to address the increasing demand of capacity, spectral efficiency, and energy efficiency of future mobile networks. Small cells are deployed only in 3-dimensional (3D) buildings within a macrocell coverage of a mobile network operator (MNO). We exploit the external wall penetration loss of each building to realize traditional dedicated access, co-primary shared access (CoPSA), and licensed shared access (LSA) techniques for the licensed spectrum access, whereas, for the unlicensed spectrum access, the licensed assisted access (LAA) technique operating in the 60 GHz unlicensed band is realized. We consider that small cells are facilitated with dual-band, and derive the average capacity, spectral efficiency, and energy efficiency metrics for each technique. We perform extensive evaluation of various performance metrics and show that LAA outperforms considerably all other techniques concerning particularly spectral and energy efficiencies. Finally, we define an optimal density of small cells satisfying both the spectral efficiency and energy efficiency requirements for the fifth-generation (5G) mobile networks.


Sensors ◽  
2020 ◽  
Vol 20 (12) ◽  
pp. 3495
Author(s):  
Rony Kumer Saha

In this paper, we propose a dynamic exclusive-use spectrum access (DESA) method to improve the overall licensed millimeter-wave (mmWave) spectrum utilization of all mobile network operators (MNOs) in a country. By exploiting secondary spectrum trading, the proposed DESA method shares partly and exclusively the licensed mmWave spectrum of one MNO to another in a dynamic and on-demand basis for a certain agreement term. We formulate the proposed DESA method for an arbitrary number of MNOs in a country. We then present an iterative algorithm to find the optimal amount of shared spectrum for each MNO, which is updated at each agreement term. We derive average capacity, spectral efficiency, energy efficiency, and cost efficiency performance metrics for all MNOs countrywide and present extensive numerical and simulation results and analyses for an example scenario of a country with four MNOs each assigned statically with an equal amount of 28-GHz mmWave spectrum. By applying DESA, we show that MNOs with a lack of minimum licensed spectra to serve their data traffic can lease at the cost of payment of the required additional spectra from other MNOs having unused or under-utilized licensed spectra. Moreover, it is shown that the overall countrywide average capacity, spectral efficiency, energy efficiency, and cost efficiency can be improved, respectively, by 25%, 25%, 17.5%, and 20%. Furthermore, we show that, by applying DESA to all MNOs countrywide, the expected spectral efficiency and energy efficiency requirements for sixth-generation (6G) mobile systems can be achieved by reusing the same mmWave spectrum to 20% fewer buildings of small cells. Finally, using the statistics of subscribers of all MNOs, we present a case study for fifth-generation (5G) networks to demonstrate the application of the proposed DESA method to an arbitrary country of four MNOs.


Energies ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1748 ◽  
Author(s):  
Rony Kumer Saha

The sixth-generation (6G) mobile networks are expected to operate at a higher frequency to achieve a wider bandwidth and to enhance the frequency reuse efficiency for improved spectrum utilization. In this regard, three-dimensional (3D) spatial reuse of millimeter-wave (mmWave) spectra by in-building small cells is considered an effective technique. In contrast to previous works exploiting microwave spectra, in this paper, we present a technique for the 3D spatial reuse of 28 and 60 GHz mmWave spectra by in-building small cells, each enabled with dual transceivers operating at 28 and 60 GHz bands, to enhance frequency reuse efficiency and achieve the expected spectral efficiency (SE) and energy efficiency (EE) requirements for 6G mobile networks. In doing so, we first present an analytical model for the 28 GHz mmWave spectrum to characterize co-channel interference (CCI) and deduce a minimum distance between co-channel small cells at both intra- and inter-floor levels in a multistory building. Using minimum distances at both intra- and inter-floor levels, we find the optimal 3D cluster size for small cells and define the corresponding 3D spatial reuse factor, such that the entire 28 and 60 GHz spectra can be reused by each 3D cluster in each building. Considering a system architecture where outdoor macrocells and picocells operate in the 2 GHz microwave spectrum, we derive system-level average capacity, SE, and EE values, as well as develop an algorithm for the proposed technique. With extensive numerical and simulation results, we show the impacts of 3D spatial reuse of multi-mmWave spectra by small cells in each building and the number of buildings per macrocell on the average SE and EE performances. Finally, it is shown that the proposed technique can satisfy the expected average SE and EE requirements for 6G mobile networks.


Sensors ◽  
2020 ◽  
Vol 20 (6) ◽  
pp. 1676
Author(s):  
Rony Kumer Saha

Addressing high capacity at low power as a key design goal envisages achieving high spectral efficiency (SE) and energy efficiency (EE) for the next-generation mobile networks. Because most data are generated in indoor environments, an ultra-dense deployment of small cells (SCs), particularly within multistory buildings in urban areas, is revealed as an effective technique to improve SE and EE by numerous studies. In this paper, we present a framework exploiting the four most interconnected-domain, including, power, time, frequency, and space, in the perspectives of SE and EE. Unlike existing literature, the framework takes advantage of higher degrees of freedom to maximize SE and EE using in-building SCs for 5G and beyond mobile networks. We derive average capacity, SE, and EE metrics, along with defining the condition for optimality of SE and EE and developing an algorithm for the framework. An extensive system-level evaluation is performed to show the impact of each domain on SE and EE. It is shown that employing multiband enabled SC base stations (SBSs) to increase operating spectrum in frequency-domain, reusing spectrum to SBSs more than once per building in spatial-domain, switching on and off each in-building SBS based on traffic availability to reduce SBS power consumption in power-domain, and using eICIC to avoid co-channel interference due to sharing spectrum with SBSs in time-domain can achieve massive SE and EE. Finally, we show that the proposed framework can satisfy SE, EE, as well as user experience data rate requirements for 5G and beyond mobile networks.


Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4346
Author(s):  
Andrea P. Guevara ◽  
Sofie Pollin

Massive MIMO is a key 5G technology that achieves high spectral efficiency and capacity by significantly increasing the number of antennas per cell. Furthermore, due to precoding, massive MIMO allows co-channel interference cancellation across cells. In this work, based on experimental channel data for an indoor scenario, we analyse the impact of inter and intra-cell interference suppression in terms of spectral efficiency, capacity, user fairness and computational cost for three simulated systems under different cooperation levels. The first scenario assumes a cooperative case where eight neighbouring cells share the spectrum and infrastructure. This scenario provides the highest system performance; however, user fairness is achieved only when there is inter and intra-cell interference suppression. The second scenario considers eight cells that only share the spectrum; with full intra-cell and inter-cell interference cancellation, it is possible to achieve 32% of the optimal capacity with 20% of the computational cost in each distributed CPU, although the total computational cost per system is the highest. The third scenario considers eight independent cells operating in different frequency bands; in this case, intra-cell interference suppression leads to higher spectral efficiency compared to the cooperative case without intra-cell interference suppression.


Electronics ◽  
2021 ◽  
Vol 10 (19) ◽  
pp. 2388
Author(s):  
Arsla Khan ◽  
Muhammad Arslan Usman ◽  
Muhammad Rehan Usman ◽  
Muneeb Ahmad ◽  
Soo-Young Shin

This study focuses on the design of a MATLAB platform for non-orthogonal multiple access (NOMA) based systems with link-level and system-level analyses. Among the different potential candidates for 5G, NOMA is gaining considerable attention owing to the many-fold increase in spectral efficiency as compared to orthogonal multiple access (OMA). In this study, a NOMA simulator is presented for two and more than two users in a single cell for link-level analysis; whereas, for system-level analysis, seven cells and 19 cells scenarios were considered. Long-term evolution (LTE) was used as the baseline for the NOMA simulator, while bit error rate (BER), throughput and spectral efficiency are used as performance metrics to analyze the simulator performance. Moreover, we demonstrated the application of the NOMA simulator for different simulation scenarios through examples. In addition, the performance of multi-carrier NOMA (MC-NOMA) was evaluated in the presence of AWGN, impulse noise, and intercell interference. To circumvent channel impairments, channel coding with linear precoding is suggested to improve the BER performance of the system.


Author(s):  
Devendra Singh Gurjar ◽  
Prabhat Kumar Upadhyay

In this chapter, the authors discuss various spectrum sharing techniques to enable device-to-device (D2D) communications over the licensed spectrum. First, they highlight the need of spectrum sharing in fifth-generation (5G) wireless and mobile networks. Then, they formulate the expressions of useful performance metrics e.g., outage probability, achievable sum-rate, and spectral efficiency of these schemes to refine physical layer design aspects. To give a better picture, they deduce some major practical scenarios where these techniques can play a crucial role in deploying future generation wireless networks. They also cover relevant literature on the spectrum sharing and D2D communications. Numerical and simulation results are provided to elucidate the effect of various system/channel parameters on the considered spectrum sharing schemes over Nakagami-m fading channels.


Frequenz ◽  
2017 ◽  
Vol 71 (1-2) ◽  
pp. 95-118 ◽  
Author(s):  
Rony Kumer Saha ◽  
Chaodit Aswakul

Abstract In this paper, a multi-band enabled femtocell base station (FCBS) and user equipment (UE) architecture is proposed in a multi-tier network that consists of small cells, including femtocells and picocells deployed over the coverage of a macrocell for splitting uplink and downlink (UL/DL) as well as control-plane and user-plane (C-/U-plane) for 5G mobile networks. Since splitting is performed at the same FCBS, we define this architecture as the same base station based split architecture (SBSA). For multiple bands, we consider co-channel (CC) microwave and different frequency (DF) 60 GHz millimeter wave (mmWave) bands for FCBSs and UEs with respect to the microwave band used by their over-laid macrocell base station. All femtocells are assumed to be deployed in a 3-dimensional multi-storage building. For CC microwave band, cross-tier CC interference of femtocells with macrocell is avoided using almost blank subframe based enhanced inter-cell interference coordination techniques. The co-existence of CC microwave and DF mmWave bands for SBSA on the same FCBS and UE is first studied to show their performance disparities in terms of system capacity and spectral efficiency in order to provide incentives for employing multiple bands at the same FCBS and UE and identify a suitable band for routing decoupled UL/DL or C-/U-plane traffic. We then present a number of disruptive architectural design alternatives of multi-band enabled SBSA for 5G mobile networks for UL/DL and C-/U-plane splitting, including a disruptive and complete splitting of UL/DL and C-/U-plane as well as a combined UL/DL and C-/U-plane splitting, by exploiting dual connectivity on CC microwave and DF mmWave bands. The outperformances of SBSA in terms of system level capacity, average spectral efficiency, energy efficiency, and control-plane overhead traffic capacity in comparison with different base stations based split architecture (DBSA) are shown. Finally, a number of technical and business perspectives as well as key research issues of SBSA are discussed.


Sign in / Sign up

Export Citation Format

Share Document