scholarly journals Dynamic Modelling and Techno-Economic Assessment of a Compressed Heat Energy Storage System: Application in a 26-MW Wind Farm in Spain

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4739 ◽  
Author(s):  
Violeta Sánchez-Canales ◽  
Jorge Payá ◽  
José M. Corberán ◽  
Abdelrahman H. Hassan
Keyword(s):  
Energy Storage ◽  
Power Plant ◽  
Electricity Market ◽  
Large Scale ◽  
Storage Systems ◽  
Capital Expenditure ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Dynamic Modelling ◽  
Heat Energy

One of the main challenges for a further integration of renewable energy sources in the electricity grid is the development of large-scale energy storage systems to overcome their intermittency. This paper presents the concept named CHEST (Compressed Heat Energy STorage), in which the excess electricity is employed to increase the temperature of a heat source by means of a high-temperature heat pump. This heat is stored in a combination of latent and sensible heat storage systems. Later, the stored heat is used to drive an organic Rankine cycle, and hereby to produce electricity when needed. A novel application of this storage system is presented by exploring its potential integration in the Spanish technical constraints electricity market. A detailed dynamic model of the proposed CHEST system was developed and applied to a case study of a 26-MW wind power plant in Spain. Different capacities of the storage system were assessed for the case under study. The results show that roundtrip efficiencies above 90% can be achieved in all the simulated scenarios and that the CHEST system can provide from 1% to 20% of the total energy contribution of the power plant, depending on its size. The CHEST concept could be economically feasible if its capital expenditure (CAPEX) ranges between 200 and 650 k€/MW.

Modeling an Energy Storage System Based on a Hybrid Renewable Energy System in Stand-alone Applications

2017 ◽  
Vol 68 (11) ◽  
pp. 2641-2645
Author(s):  
Alexandru Ciocan ◽  
Ovidiu Mihai Balan ◽  
Mihaela Ramona Buga ◽  
Tudor Prisecaru ◽  
Mohand Tazerout
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Compressed Air ◽  
Energy Sources ◽  
Energy Storage Systems ◽  
Hybrid Renewable Energy System

The current paper presents an energy storage system that stores the excessive energy, provided by a hybrid system of renewable energy sources, in the form of compressed air and thermal heat. Using energy storage systems together with renewable energy sources represents a major challenge that could ensure the transition to a viable economic future and a decarbonized economy. Thermodynamic calculations are conducted to investigate the performance of such systems by using Matlab simulation tools. The results indicate the values of primary and global efficiencies for various operating scenarios for the energy storage systems which use compressed air as medium storage, and shows that these could be very effective systems, proving the possibility to supply to the final user three types of energy: electricity, heat and cold function of his needs.

scholarly journals Gravitricity based on solar and gravity energy storage for residential applications

2021 ◽  
Author(s):  
Oluwole K. Bowoto ◽  
Omonigho P. Emenuvwe ◽  
Meysam N. Azadani
Keyword(s):  
Energy Storage ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Computational Modelling ◽  
Dynamic Modelling ◽  
Design Parameters ◽  
Energy Potential ◽  
Height Range ◽  
Efficient System ◽  
Priority List

AbstractThis study proposes a design model for conserving and utilizing energy affordably and intermittently considering the wind rush experienced in the patronage of renewable energy sources for cheaper generation of electricity and the solar energy potential especially in continents of Africa and Asia. Essentially, the global quest for sustainable development across every sector is on the rise; hence, the need for a sustainable method of extracting energy cheaply with less wastage and pollution is on the priority list. This research, integrates and formulates different ideologies, factors and variables that have been adopted in previous research studies to create an efficient system. Some of the aforementioned researches includes pumped hydro gravity storage system, Compressed air gravity storage system, suspended weight in abandoned mine shaft, dynamic modelling of gravity energy storage coupled with a PV energy plant and deep ocean gravity energy storage. As an alternative and a modification to these systems, this research is proposing a Combined solar and gravity energy storage system. The design synthesis and computational modelling of the proposed system model were investigated using a constant height and but varying mass. Efficiencies reaching up to 62% was achieved using the chosen design experimental parameters adopted in this work. However, this efficiency can be tremendously improved upon if the design parameters are modified putting certain key factors which are highlighted in the limitation aspect of this research into consideration. Also, it was observed that for a test load of 50 × 103 mA running for 10 h (3600 s), the proposed system will only need to provide a torque of 3.27Nm and a height range of 66.1 × 104 m when a mass of 10 kg is lifted to give out power of 48 kwh. Since gravity storage requires intermittent actions and structured motions, mathematical models were used to analyse the system performance characteristics amongst other important parameters using tools like MATLAB Simscape modelling toolbox, Microsoft excel and Sysml Model software.

scholarly journals Sizing and Management of Energy Storage Systems in Large-Scale Power Plants Using Price Control and Artificial Intelligence

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3296
Author(s):  
Carlos García-Santacruz ◽  
Luis Galván ◽  
Juan M. Carrasco ◽  
Eduardo Galván
Keyword(s):  
Energy Storage ◽  
Power Plants ◽  
Large Scale ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Ancillary Services ◽  
Energy Sources ◽  
Energy Storage Systems ◽  
Electric System ◽  
Fundamental Part

Energy storage systems are expected to play a fundamental part in the integration of increasing renewable energy sources into the electric system. They are already used in power plants for different purposes, such as absorbing the effect of intermittent energy sources or providing ancillary services. For this reason, it is imperative to research managing and sizing methods that make power plants with storage viable and profitable projects. In this paper, a managing method is presented, where particle swarm optimisation is used to reach maximum profits. This method is compared to expert systems, proving that the former achieves better results, while respecting similar rules. The paper further presents a sizing method which uses the previous one to make the power plant as profitable as possible. Finally, both methods are tested through simulations to show their potential.

scholarly journals Design Considerations for the Liquid Air Energy Storage System Integrated to Nuclear Steam Cycle

2021 ◽  
Vol 11 (18) ◽  
pp. 8484
Author(s):  
Seok-Ho Song ◽  
Jin-Young Heo ◽  
Jeong-Ik Lee
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Power Sources

A nuclear power plant is one of the power sources that shares a large portion of base-load. However, as the proportion of renewable energy increases, nuclear power plants will be required to generate power more flexibly due to the intermittency of the renewable energy sources. This paper reviews a layout thermally integrating the liquid air energy storage system with a nuclear power plant. To evaluate the performance realistically while optimizing the layout, operating nuclear power plant conditions are used. After revisiting the analysis, the optimized performance of the proposed system is predicted to achieve 59.96% of the round-trip efficiency. However, it is further shown that external environmental conditions could deteriorate the performance. For the design of liquid air energy storage-nuclear power plant integrated systems, both the steam properties of the linked plants and external factors should be considered.

A Thermodynamic Model of a High Temperature Hybrid Compressed Air Energy Storage System for Grid Storage

2016 ◽  
Author(s):  
Sammy Houssainy ◽  
Reza Baghaei Lakeh ◽  
H. Pirouz Kavehpour
Keyword(s):  
Global Warming ◽  
Energy Storage ◽  
Power Plants ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Compressed Air ◽  
Compressed Air Energy Storage ◽  
Energy Storage Systems

Human activity is overloading our atmosphere with carbon dioxide and other global warming emissions. These emissions trap heat, increase the planet’s temperature, and create significant health, environmental, and climate issues. Electricity production accounts for more than one-third of U.S. global warming emissions, with the majority generated by coal-fired power plants. These plants produce approximately 25 percent of total U.S. global warming emissions. In contrast, most renewable energy sources produce little to no global warming emissions. Unfortunately, generated electricity from renewable sources rarely provides immediate response to electrical demands, as the sources of generation do not deliver a regular supply easily adjustable to consumption needs. This has led to the emergence of storage as a crucial element in the management of energy, allowing energy to be released into the grid during peak hours and meet electrical demands. Compressed air energy storage can potentially allow renewable energy sources to meet electricity demands as reliably as coal-fired power plants. Most compressed air energy storage systems run at very high pressures, which possess inherent problems such as equipment failure, high cost, and inefficiency. This research aims to illustrate the potential of compressed air energy storage systems by illustrating two different discharge configurations and outlining key variables, which have a major impact on the performance of the storage system. Storage efficiency is a key factor to making renewable sources an independent form of sustainable energy. In this paper, a comprehensive thermodynamic analysis of a compressed air energy storage system is presented. Specifically, a detailed study of the first law of thermodynamics of the entire system is presented followed by a thorough analysis of the second law of thermodynamics of the complete system. Details of both discharge and charge cycles of the storage system are presented. The first and second law based efficiencies of the system are also presented along with parametric studies, which demonstrates the effects of various thermodynamic cycle variables on the total round-trip efficiency of compressed air energy storage systems.

A PCM/Forced Convection Conjugate Transient Analysis of Energy Storage Systems With Annular and Countercurrent Flows

1991 ◽  
Vol 113 (1) ◽  
pp. 37-42 ◽  
Author(s):  
Y. Cao ◽  
A. Faghri ◽  
A. Juhasz
Keyword(s):  
Energy Storage ◽  
Storage Systems ◽  
Storage System ◽  
System Optimization ◽  
Conjugate Problem ◽  
Heat Energy ◽  
Energy Storage Systems ◽  
Space Applications ◽  
Power Load ◽  
Short Period

Latent heat energy storage systems with both annular and countercurrent flows are modeled numerically. The change of phase of the phase-change material (PCM) and the transient forced convective heat transfer for the transfer fluid are solved simultaneously as a conjugate problem. A parametric study and a system optimization are conducted. It is found that the energy storage system with the counter-current flow is an efficient way to absorb heat energy in a short period for pulsed power load space applications.

A Study on Wind - Energy Storage Hybrid System

2011 ◽  
Vol 187 ◽  
pp. 97-102 ◽  
Author(s):  
Liang Liang ◽  
Jian Lin Li ◽  
Dong Hui
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power System ◽  
Wind Energy ◽  
Wind Power ◽  
Large Scale ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Wind Power System

Recently, more and more people realize the importance of environment protection. Electric power generation systems using renewable energy sources have an advantage of no greenhouse effect gas emission. Among all the choices, wind power can offer an economic and environmentally friendly alternative to conventional methods of power supply. As a result, wind energy generation, utilization and its grid penetration in electrical grid is increasing world wide. The wind generated power is always fluctuating due to its time varying nature and causing stability problem. Inserting energy storage system into large scale wind farm to eliminate the fluctuation becomes a solution for developing large scale renewable energy system connected with grid. The topology diagram and control strategy are presented in this paper. According to the simulation result, it could be indicated that embedding energy storage system into wind power system could improve the access friendly and extend system functions. This paper shows that integrating energy storage system into wind power system will build a more reliable and flexible system for power grid.

scholarly journals MARKET MECHANISM FORMATION FOR STIMULATING THE DEVELOPMENT OF ENERGY ACCUMULATION SYSTEMS IN UKRAINE

2021 ◽  
Vol 2021 (3) ◽  
Author(s):  
U. Pysmenna ◽  
I. Sotnyk ◽  
O. Kubatko ◽  
G. Trypolska ◽  
T. Kurbatova
Keyword(s):  
Energy Storage ◽  
Electricity Market ◽  
Service Providers ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Energy System ◽  
Economic Incentives ◽  
Market Mechanism ◽  
Energy Storage Systems ◽  
Cost And Benefit Analysis

development of energy storage systems. The current state of energy storage systems in Ukraine is studied. The capacity of the segment of energy storage systems in the energy market, due to the need to meet the requirements of the European Energy Community on the flexibility of the integrated energy system, renewable energy sources and the objective need to use such systems as system service providers. The sufficiency of market and state incentives for the broad application and development of energy storage technologies in the conditions of quasi-competitive and full-scale electricity market of Ukraine is determined, taking into account the perspective tendencies of energy development. The cost and benefit analysis of investment projects for installation and operation of energy storage systems for three most common and prospective types of applications for the Ukrainian electricity market: participation in the market of ancillary system services, participation in the balancing market and system constraints reduction (renewables) is conducted. The sensitivity of project indicators of these types of applications is analyzed depending on the number of parameters: variations in specific capital expenditures, green tariff rates, market prices "day ahead" and market conditions of system services. It is substantiated that in Ukraine the energy storage systems are the most promising as the providers of system services for primary regulation of frequency and power, a sufficient reserve of which is one of the conditions for integration of the Ukrainian power system into the European energy system ENTSO-E, ancillary services through auctions for the provision of primary regulation services with a long-term time horizon. Regarding the prospects for the development of decentralized energy system, it is proved that the development of decentralized storage systems consisting of industrial facilities, substations and other low-capacity energy facilities has great potential with reformatting the energy system architecture to "smart grid" standards to form fundamentally new economic incentives for the development of energy storage systems.

scholarly journals Spatial-Economic Potential Analysis of Wind Power Plants in Germany

Wind ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 77-89
Author(s):  
David Hennecke ◽  
Carsten Croonenbroeck
Keyword(s):  
Power Plant ◽  
Wind Power ◽  
Electricity Market ◽  
Regional Planning ◽  
Power Plants ◽  
Large Scale ◽  
Renewable Energy Sources ◽  
Levelized Cost Of Electricity ◽  
Potential Analysis ◽  
Federal States

Before a new wind farm can be built, politics and regional planning must approve of the respective area as a suitable site. For this purpose, large-scale potential computations were carried out to identify suitable areas. The calculation of wind power plant potential usually focuses on capturing the highest energy potential. In Germany, due to an energy production reimbursement factor defined in the Renewable Energy Sources Act (“Erneuerbare-Energien-Gesetz”, EEG) in 2017, the influence of energy quantities on the power plant potential varies, economically and spatially. Therefore, in addition to the calculation of energy potentials, it was also necessary to perform a potential analysis in terms of economic efficiency. This allows, on the one hand, an economic review of the areas tendered by the regional planning and, on the other hand, a spatial-economic analysis that expands the parameters in the search for new areas. In this work, (a) potentials with regard to the levelized cost of electricity (LCOE) were calculated by the example of the electricity market in Germany, which were then (b) spatially and statistically processed on the level of the federal states.

Sign in / Sign up

Export Citation Format

Share Document