scholarly journals Investigation of the Multi-Point Injection of Green Hydrogen from Curtailed Renewable Power into a Gas Network

Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 6047 ◽  
Author(s):  
Ali Ekhtiari ◽  
Damian Flynn ◽  
Eoin Syron
Keyword(s):  
Green Energy ◽  
Active Management ◽  
Electricity Production ◽  
Renewable Electricity ◽  
Gas Network ◽  
Network Location ◽  
Network Parameters ◽  
Renewable Power ◽  
The Impact

Renewable electricity can be converted into hydrogen via electrolysis also known as power-to-H2 (P2H), which, when injected in the gas network pipelines provides a potential solution for the storage and transport of this green energy. Because of the variable renewable electricity production, the electricity end-user’s demand for “power when required”, distribution, and transmission power grid constrains the availability of renewable energy for P2H can be difficult to predict. The evaluation of any potential P2H investment while taking into account this consideration, should also examine the effects of incorporating the produced green hydrogen in the gas network. Parameters, including pipeline pressure drop, flowrate, velocity, and, most importantly, composition and calorific content, are crucial for gas network management. A simplified representation of the Irish gas transmission network is created and used as a case study to investigate the impact on gas network operation, of hydrogen generated from curtailed wind power. The variability in wind speed and gas network demands that occur over a 24 h period and with network location are all incorporated into a case study to determine how the inclusion of green hydrogen will affect gas network parameters. This work demonstrates that when using only curtailed renewable electricity during a period with excess renewable power generation, despite using multiple injection points, significant variation in gas quality can occur in the gas network. Hydrogen concentrations of up to 15.8% occur, which exceed the recommended permitted limits for the blending of hydrogen in a natural gas network. These results highlight the importance of modelling both the gas and electricity systems when investigating any potential P2H installation. It is concluded that, for gas networks that decarbonise through the inclusion of blended hydrogen, active management of gas quality is required for all but the smallest of installations.

scholarly journals Optimal Design of Hybrid PV-Diesel - Battery System for a Small Cement Brick Factory: A Case Study for Bahteem, Egypt

2021 ◽  
Vol 15 ◽  
pp. 1-7
Author(s):  
Hanaa M. Farghally ◽  
Ninet M. Ahmed ◽  
Faten H. Fahmy ◽  
Emad A. Sweelem ◽  
Amal A. Hassan
Keyword(s):  
Diesel Generator ◽  
Battery System ◽  
Renewable Power ◽  
Greenhouse Gases Emissions ◽  
Load Demand ◽  
Power Part ◽  
Hybrid Configuration ◽  
Pv Penetration ◽  
The Impact

This paper study the optimization & finical test of a hybrid power system holds Photovoltaic (PV) array, Diesel generator and Battery for a small cement bricks factory located in Bahtem, Egypt covering a load demand of 24.5kWh/day with a 4.92 kW peak. In this factory, light weight binder bricks are manufactured from the recycling of chopped grind straw which can be utilized as fillers in bone type buildings. HOMER software is utilized to run the frugal feasibility of hybrid PV-Diesel-Battery system. The study proved that the impact of PV penetration and battery storage on power production, expense of power, number of operational hours of diesel generators for a given hybrid configuration. PV panels and diesel generator produce 10,654 and 2,701 kWh/year, respectively and 2,783 kWh/year of power is stocked in the batteries. The renewable power part was 70%. The system was optimally sized with a PV of 7 kW, a diesel generator of 5.5 kW, a converter of 4.9 kW and 8 units of battery The obtained results showed that PV-Diesel-Battery system generates a great reduction in both the operating expenses the amount of CO2 and other greenhouse gases emissions.

Modeling Energy Portfolio Scoring

2015 ◽  
Vol 2 (4) ◽  
pp. 1-22 ◽  
Author(s):  
Rafael Diaz ◽  
Joshua G. Behr ◽  
Rafael Landaeta ◽  
Francesco Longo ◽  
Letizia Nicoletti
Keyword(s):  
Renewable Energy ◽  
Production Method ◽  
Economic Benefits ◽  
Dynamics Simulation ◽  
Electricity Production ◽  
Simulation Framework ◽  
Renewable Electricity ◽  
Hampton Roads ◽  
Support Policy ◽  
The Impact

U.S. regions are expected to follow the national trend towards investment in renewable energy as part of their electricity portfolio. The progress of energy portfolios that typically involves traditional methods, such as centralized nuclear and coal-fired generation, and towards cleaner- and renewable-source generation will impact economic growth and public health. Renewable electricity production must strike a balance among cost, reliability, and compatibility. The economic and health benefits obtained from developing an efficient energy portfolio make renewable energy alternatives an important consideration for regions endowed with natural resources. A portfolio mix of production method that considers the economic benefits while limiting adverse health and environmental impacts is attractive. This research proposes a System Dynamics simulation framework to support policy-making efforts in assessing the impact of energy portfolios. The authors demonstrate the utility of the framework by means of analyzing data that pertain to the U.S. Hampton Roads - Peninsula Region.

scholarly journals The impact of climatic extreme events on the feasibility of fully renewable power systems: A case study for Sweden

Energy ◽  
2019 ◽  
Vol 178 ◽  
pp. 695-713 ◽  
Author(s):  
Stefan Höltinger ◽  
Christian Mikovits ◽  
Johannes Schmidt ◽  
Johann Baumgartner ◽  
Berit Arheimer ◽  
...  
Keyword(s):  
Power Systems ◽  
Extreme Events ◽  
Renewable Power ◽  
The Impact

Simulating the impact of coal seam gas water production on aquifers

2012 ◽  
Vol 52 (1) ◽  
pp. 545 ◽  
Author(s):  
Julian Strand ◽  
Reem Freij-Ayoub ◽  
Shakil Ahmed
Keyword(s):  
Coal Seam ◽  
Electricity Production ◽  
Water Production ◽  
Hypothetical Case ◽  
Coal Seam Gas ◽  
Coal Resources ◽  
Victorian Department ◽  
Gippsland Basin ◽  
The Impact

Derived from a larger scale project, which studied geomechanical issues associated with coal seam gas (CSG) production, this paper investigates a hypothetical case study based on the Latrobe Valley, Gippsland Basin, Victoria. The paper focuses on examining aquifer water management associated with CSG production-related water extraction. As such, the paper limits itself to determining the volume of water production from a hypothetical case study area in the Latrobe Valley. A simplistic property model and methane production strategy has been used. The impact of extraction of this water on the hydraulic head in aquifers underlying the produced seams is quantified. The Latrobe Valley Depression contains 129,000 million tonnes of coal resources and is one of the world’s largest, and lowest cost, energy sources. Most of Victoria’s electricity is generated using coal from the Loy Yang, Morwell and Yallourn mines. In addition to these massive operations, significant additional coal resources are available and unallocated at this time. Opportunities exist for the continued usage of these resources for electricity production, gasification, liquefaction and other coal conversion processes, as well as solid fuel for industrial, domestic and other uses. The existence of data from the Victorian Department of Primary Industries 2003 coal resource model was the main reason for the selection of the case study, and their data was used to form a model of the stratigraphy of the Latrobe Valley. Aquifer models were simulated in MODFLOW, based on extraction figures modelled in the CSG simulator COMET3.

scholarly journals Promising Catalytic Systems for CO2 Hydrogenation into CH4: A Review of Recent Studies

Processes ◽  
2020 ◽  
Vol 8 (12) ◽  
pp. 1646
Author(s):  
M. Carmen Bacariza ◽  
Daniela Spataru ◽  
Leila Karam ◽  
José M. Lopes ◽  
Carlos Henriques
Keyword(s):  
Electricity Production ◽  
Renewable Electricity ◽  
Solid Supports ◽  
Co2 Methanation ◽  
Catalytic Systems ◽  
Gas Network ◽  
Active Metal ◽  
Carbon Dioxide Methanation ◽  
Power To Gas ◽  
Synthesized Materials

The increasing utilization of renewable sources for electricity production turns CO2 methanation into a key process in the future energy context, as this reaction allows storing the temporary renewable electricity surplus in the natural gas network (Power-to-Gas). This kind of chemical reaction requires the use of a catalyst and thus it has gained the attention of many researchers thriving to achieve active, selective and stable materials in a remarkable number of studies. The existing papers published in literature in the past few years about CO2 methanation tackled the catalysts composition and their related performances and mechanisms, which served as a basis for researchers to further extend their in-depth investigations in the reported systems. In summary, the focus was mainly in the enhancement of the synthesized materials that involved the active metal phase (i.e., boosting its dispersion), the different types of solid supports, and the frequent addition of a second metal oxide (usually behaving as a promoter). The current manuscript aims in recapping a huge number of trials and is divided based on the support nature: SiO2, Al2O3, CeO2, ZrO2, MgO, hydrotalcites, carbons and zeolites, and proposes the main properties to be kept for obtaining highly efficient carbon dioxide methanation catalysts.

scholarly journals A Quadratically Constrained Optimization Problem for Determining the Optimal Nominal Power of a PV System in Net-Metering Model: A Case Study for Croatia

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1746
Author(s):  
Luka Budin ◽  
Goran Grdenić ◽  
Marko Delimar
Keyword(s):  
Optimization Problem ◽  
Net Present Value ◽  
Electrical Energy ◽  
Electricity Production ◽  
Discrete Optimization Problem ◽  
Pv System ◽  
Net Metering ◽  
Quadratically Constrained ◽  
The Impact

The world’s demand for electrical energy is increasing rapidly while the use of fossil fuels is getting limited more and more by energy policies and the need for reducing the impact of climate change. New sources of energy are required to fulfill the world’s demand for electricity and they are currently found in renewable sources of energy, especially in solar and wind power. Choosing the optimal PV nominal power minimizes the unnecessary surplus of electrical energy that is exported to the grid and thus is not making any impact on the grid more than necessary. Oversizing the PV system according to the Croatian net-metering model results in switching the calculation of the costs to the prosumer model which results in a decrease of the project’s net present value (NPV) and an increase in the payback period (PP). This paper focuses on formulating and solving the optimization problem for determining the optimal nominal power of a grid-connected PV system with a case study for Croatia using multiple scenarios in the variability of electricity production and consumption. In this paper, PV systems are simulated in the power range that corresponds to a typical annual high-tariff consumption in Croatian households. Choosing the optimal power of the PV system maximizes the investor’s NPV of the project as well as savings on the electricity costs. The PP is also minimized and is determined by the PV production, household consumption, discount rate, and geographic location. The optimization problem is classified as a quadratically constrained discrete optimization problem, where the value of the optimal PV power is not a continuous variable because the PV power changes with a step of one PV panel power. Modeling and simulations are implemented in Python using the Gurobi optimization solver.

scholarly journals Optimal sizing of a distributed energy system with thermal load electrification

2020 ◽  
Vol 197 ◽  
pp. 01006
Author(s):  
Pietro Lubello ◽  
Guglielmo Vaccaro ◽  
Carlo Carcasci
Keyword(s):  
Thermal Load ◽  
Large Scale ◽  
Energy Systems ◽  
Power Production ◽  
Electricity Production ◽  
Distributed Energy ◽  
Optimal Sizing ◽  
First Case ◽  
The Impact

Renewable energy systems (RES) are currently being deployed on a large scale to meet the ambitious sustainable development goals for the next decades. A higher penetration of sustainable means of power production passes through the diffusion of RES-based distributed energy systems. The hybridization of such systems and their integration with Energy Storage Systems (ESS) can help improve reliability and level the mismatch between power production and consumption. In this paper, a novel modular tool for the simulation of distributed energy systems is presented by means of its application to a case study. The considered system is composed by PV modules, ESS and heat pumps. The optimal sizing of the components for self-consumption has been obtained through an electricity production cost minimization. A comparison between two different configurations has been conducted: in the first case, the thermal load is completely satisfied by a natural gas-fired boiler, while in the latter case, part of the thermal load is satisfied by a heat pump. The results have highlighted the impact of ESS on the economics of distributed energy systems and how the investment in such systems, in conditions similar to the case study, can be more easily sustained if a share of the total energy consumption of the unit is shifted from the thermal to the electrical part.

scholarly journals Hoard or Exploit? Intergenerational Allocation of Exhaustible Natural Resources

Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6657
Author(s):  
Hala Abu-Kalla ◽  
Ruslana Rachel Palatnik ◽  
Ofira Ayalon ◽  
Mordechai Shechter
Keyword(s):  
Natural Resources ◽  
Investment Strategy ◽  
Extraction Rate ◽  
Electricity Production ◽  
Economic Welfare ◽  
Baseline Scenario ◽  
Renewable Electricity ◽  
The Government ◽  
The Impact ◽  
Allocation Strategies

In this paper, a “general equilibrium” (GE) model was developed for the allocation of exhaustible natural resources to examine the impact of different extraction scenarios on intergenerational economic welfare. A stylized GE model was applied to Israel’s natural gas (NG) market to evaluate economic indicators resulting from NG-extraction scenarios: a baseline scenario based on current policy in the NG sector, a conservative scenario based on a lower extraction rate, and an intensive scenario based on a faster extraction rate. The impact of various resource income-allocation strategies on intergenerational economic welfare was examined through the mechanism of a “sovereign wealth fund” (SWF). The results indicate that a higher NG-extraction rate combined with an appropriate investment strategy for NG profits is preferable from an economic perspective compared to a conservative rate. Investment of the government take from the NG market in research and development (R&D) of renewable electricity production can sustainably increase economic welfare.

Sign in / Sign up

Export Citation Format

Share Document