scholarly journals Peak Power of Heat Source for Domestic Hot Water Preparation (DHW) for Residential Estate in Poland as a Representative Case Study for the Climate of Central Europe

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 8047
Author(s):  
Łukasz Amanowicz
Keyword(s):  
Heat Source ◽  
Peak Power ◽  
Residential Buildings ◽  
Renewable Energy Sources ◽  
Hot Water ◽  
Correct Selection ◽  
Domestic Hot Water ◽  
Heat Demand ◽  
Selection Of

Due to the energy transformation in buildings, the proportions of energy consumption for heating, ventilation and domestic hot water preparation (DHW) have changed. The latter component can now play a significant role, not only in the context of the annual heat demand, but also in the context of selecting the peak power of the heat source. In this paper, the comparison of chosen methods for its calculation is presented. The results show that for contemporary residential buildings, the peak power for DHW preparation can achieve the same or higher value as the peak power for heating and ventilation. For this reason, nowadays the correct selection of the peak power of a heat source for DHW purposes becomes more important, especially if it uses renewable energy sources, because it affects its size and so the investment cost and economic efficiency. It is also indicated that in modern buildings, mainly accumulative systems with hot water storage tanks should be taken into account because they are less sensitive to design errors (wrongly selected peak value in the context of the uncertainty of hot water consumption) and because they result in acceptable value of peak power for DHW in comparison to heating and ventilation.

scholarly journals Life Cycle Assessment (LCA) of an Innovative Compact Hybrid Electrical-Thermal Storage System for Residential Buildings in Mediterranean Climate

2021 ◽  
Vol 13 (9) ◽  
pp. 5322
Author(s):  
Gabriel Zsembinszki ◽  
Noelia Llantoy ◽  
Valeria Palomba ◽  
Andrea Frazzica ◽  
Mattia Dallapiccola ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Mediterranean Climate ◽  
Residential Buildings ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Hot Water ◽  
Electrical Consumption ◽  
The Impact

The buildings sector is one of the least sustainable activities in the world, accounting for around 40% of the total global energy demand. With the aim to reduce the environmental impact of this sector, the use of renewable energy sources coupled with energy storage systems in buildings has been investigated in recent years. Innovative solutions for cooling, heating, and domestic hot water in buildings can contribute to the buildings’ decarbonization by achieving a reduction of building electrical consumption needed to keep comfortable conditions. However, the environmental impact of a new system is not only related to its electrical consumption from the grid, but also to the environmental load produced in the manufacturing and disposal stages of system components. This study investigates the environmental impact of an innovative system proposed for residential buildings in Mediterranean climate through a life cycle assessment. The results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage. A parametric study was also performed to investigate the effect of the design of the storage system on the overall system impact.

scholarly journals Estimation of Energy Activity and Flexibility Range in Smart Active Residential Building

Smart Cities ◽  
2019 ◽  
Vol 2 (4) ◽  
pp. 471-495
Author(s):  
Viktor Stepaniuk ◽  
Jayakrishnan Pillai ◽  
Birgitte Bak-Jensen ◽  
Sanjeevikumar Padmanaban
Keyword(s):  
Renewable Energy ◽  
Energy Management ◽  
Storage Tank ◽  
Residential Buildings ◽  
Renewable Energy Sources ◽  
Hot Water ◽  
Active Management ◽  
Worst Case ◽  
And Storage ◽  
Storage Units

The smart active residential buildings play a vital role to realize intelligent energy systems by harnessing energy flexibility from loads and storage units. This is imperative to integrate higher proportions of variable renewable energy generation and implement economically attractive demand-side participation schemes. The purpose of this paper is to develop an energy management scheme for smart sustainable buildings and analyze its efficacy when subjected to variable generation, energy storage management, and flexible demand control. This work estimate the flexibility range that can be reached utilizing deferrable/controllable energy system units such as heat pump (HP) in combination with on-site renewable energy sources (RESs), namely photovoltaic (PV) panels and wind turbine (WT), and in-house thermal and electric energy storages, namely hot water storage tank (HWST) and electric battery as back up units. A detailed HP model in combination with the storage tank is developed that accounts for thermal comforts and requirements, and defrost mode. Data analytics is applied to generate demand and generation profiles, and a hybrid energy management and a HP control algorithm is developed in this work. This is to integrate all active components of a building within a single complex-set of energy management solution to be able to apply demand response (DR) signals, as well as to execute all necessary computation and evaluation. Different capacity scenarios of the HWST and battery are used to prioritize the maximum use of renewable energy and consumer comfort preferences. A flexibility range of 22.3% is achieved for the scenario with the largest HWST considered without a battery, while 10.1% in the worst-case scenario with the smallest HWST considered and the largest battery. The results show that the active management and scheduling scheme developed to combine and prioritize thermal, electrical and storage units in buildings is essential to be studied to demonstrate the adequacy of sustainable energy buildings.

scholarly journals Procedure for the Selection of Rubber Compound in Rubber-Metal Springs for Vibration Isolation

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1737
Author(s):  
Milan Banić ◽  
Dušan Stamenković ◽  
Aleksandar Miltenović ◽  
Dragan Jovanović ◽  
Milan Tica
Keyword(s):  
Numerical Simulation ◽  
Constitutive Model ◽  
Vibration Isolation ◽  
Correct Selection ◽  
Virtual Experiment ◽  
Rubber Compound ◽  
Key Factor ◽  
Railway Engineering ◽  
Selection Of

The selection of a rubber compound has a determining influence on the final characteristics of rubber-metal springs. Therefore, the correct selection of a rubber compound is a key factor for development of rubber-metal vibration isolation springs with required characteristics. The procedure for the selection of the rubber compound for vibration isolation of rubber-metal springs has been proposed, so that the rubber-metal elements have the necessary characteristics, especially in terms of deflection. The procedure is based on numerical simulation of spring deflection with Bergström-Boyce constitutive model in virtual experiment, with a goal to determine which parameters of the constitutive model will lead to spring required deflection. The procedure was verified by case study defined to select rubber compound for a rubber–metal spring used in railway engineering.

Architecture Design of Building Integrated Solar Collector

2014 ◽  
Vol 889-890 ◽  
pp. 1333-1336
Author(s):  
Yu Fu ◽  
Kai Chen ◽  
Fei Ying Fu ◽  
Xin Bin Wang
Keyword(s):  
Water Supply ◽  
Solar Collector ◽  
Residential Buildings ◽  
Radiation Energy ◽  
Hot Water ◽  
Space Heating ◽  
Solar Collectors ◽  
Domestic Hot Water ◽  
Heating And Cooling ◽  
Hot Water Supply

Solar thermal collector converts solar radiation energy into useful thermal energy and transfers to a transport fluid flowing through the system. The collected energy can be used either direct to space or water heating equipment, or to a thermal storage for later use. Along with fast development, not only domestic hot water supply is needed, but also space heating and cooling are required. Also, limited roof space is another key barrier that should be considered. Furthermore, most of the building integration with solar collectors are mounted on the roof top by flat or tilt angle at present. It is considered to be a failure of low level architectural quality because the collector is used only for application and seems as an independent technical element of the building. With the consideration of the above, novel type of solar collector has been proposed to realize the utilization and offset the barriers. This novel solar collectors is especially suitable to supply domestic hot water, and combines with ASHP for multi-function, space heating and cooling as well as domestic hot water supply. Additionally, it is well integrated with high-rise residential buildings, which is good for aesthetic.

Selection Principles and Investigation of Substances for Synthesis of Composite Medium-Temperature Phase Change Materials for Space Heating and Domestic Hot Water

2020 ◽  
Vol 989 ◽  
pp. 165-171
Author(s):  
A.M. Morzhukhin ◽  
D.S. Testov ◽  
S.V. Morzhukhina
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Hot Water ◽  
Temperature Phase ◽  
Heat Accumulation ◽  
Medium Temperature ◽  
Domestic Hot Water ◽  
Selection Principles ◽  
Salt Hydrates ◽  
Selection Of

The types of heat accumulation and the types of heat-accumulating materials are considered. It is shown that the most promising as heat-accumulating materials for heating and hot water are the salts hydrates. Based on the conducted factor analysis, a number of criteria are excluded from further consideration, which significantly reduces the list of criteria considered for selecting phase change materials (PCM) and simplifies further work on the selection of the most promising materials. There were selected from over 160 salt hydrates as PCM for the future of composite synthesis for the heating and hot water the Na (CH3COO) •3H2O, Ba (OH)2•8H2O, Mg (NO3)2 •6H2O and Zn (NO3)2•6H2O.

Sign in / Sign up

Export Citation Format

Share Document