scholarly journals Designing for the Environment: An Example of Multi-Criteria Analysis Used for Solar Hot Water System Selection

Energies ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 65
Author(s):  
Agnieszka Żelazna ◽  
Justyna Gołębiowska

In the European Union, the building sector accounts for more than 40% of final energy consumption, contributing to the deterioration of the quality of the environment. Among the various solutions that aim to reduce the negative environmental impact caused by the operation of buildings, solar hot water systems (SHW) are popular. The choice of a SHW system is associated with the comfort of use and the access to low-cost energy. The design guidelines include the technical parameters for system operation such as materials, dimensions, sizing and operation temperatures. However, the legitimacy of choosing a particular solution and the available technical parameters are key issues. In the presented study, a multi-criteria analysis was proposed as a basis for the proper selection of system parameters, e.g., collector type, solar tank volume. A model of the SHW system was used to calculate the possible solutions, ensuring the same comfort of usage for several design options. The analyzed model was then used for the calculation of three various indicators: Simple Payback Time (SPBT), Primary Energy consumption (PE) and IMPACT 2002+. The application of a multi-criteria analysis based on a Life Cycle Assessment allowed for beneficial solutions to be found from the point of view of economics, non-renewable resources and environmental protection.

2014 ◽  
Vol 87 ◽  
pp. 1151-1161 ◽  
Author(s):  
Mihaela Berković-Šubić ◽  
Martina Rauch ◽  
Damir Dović ◽  
Mladen Andrassy

HortScience ◽  
1994 ◽  
Vol 29 (4) ◽  
pp. 249a-249
Author(s):  
Eric A. Lavoie ◽  
Damien de Halleux ◽  
André Gosselin ◽  
Jean-Claude Dufour

The main objective of this research was to produce a simulated model that permitted the evaluation of operating costs of commercial greenhouse tomato growers with respect to heating methods (hot air, hot water, radiant and heat pumps) and the use of artificial lighting for 1991 and 1992. This research showed that the main factors that negatively influence profitability were energy consumption during cold periods and the price of tomatoes during the summer season. The conventional hot water system consumed less energy than the heat pump system and produced marketable fruit yields similar to those from the heat pump system. The hot water system was generally more profitable in regards to energy consumption and productivity. Moreover, investment costs were less; therefore, this system gives best overall financial savings. As for radiant and hot air systems, their overall financial status falls between that of the hot water system and the heat pump. The radiant system proved to be more energy efficient that the hot air system, but the latter produced a higher marketable fruit yield over the 2-year study.


2013 ◽  
Vol 316-317 ◽  
pp. 176-180 ◽  
Author(s):  
Xue Jing Zheng ◽  
Meng Jun Yang ◽  
Wan Dong Zheng ◽  
Yun Kun Bu

Sino-Singapore Tianjin Eco-city is a strategic cooperation project between China and Singapore to improve the living environment and build an eco-culture. Animation-park covers an area of 1 km2, with a total construction area of 7.7x105m2. Wide sources of the renewable energy, such as solar hot water system, ground source heat pump system, solar PV power generation system, and deep geothermal energy system, is strongly recommended to use in eco-city in order to save energy and protect the environment. The usage of renewable energy is seen as a complement to the conventional energy. The energy consumption of the animation park is 42926tce of coal per year, and the renewable energy that used is 4573.6tce of coal per year. The usage of renewable energy leads to the reduction in the emission of CO2 of 18895.9t per year.


2016 ◽  
Vol 32 (3) ◽  
pp. 5-22 ◽  
Author(s):  
Katarzyna Stala-Szlugaj

Abstract Due to the important role of hard coal in the Polish residential sector, the article traced the changes that have occurred in the use of this fuel in the European Union and in Poland in the years 1990–2014. Throughout the European Union, hard coal has an important place in the structure of primary energy consumption. In the years 1990–2014, primary energy consumption in the European Union (calculated for all 28 Member States) has changed between 1507 and 1722 million toe. Between 2014 and 1990, there was a decrease of primary energy consumption, and the average rate of decline amounted to −0.2%. According to Council Directive 2013/12/EU, by the year 2020 energy consumption throughout the EU is expected to be no more than 1483 Mtoe of primary energy, and already in 2014 total primary energy consumption in the EU28 was higher than assumed by this target by only about 24 million toe (2%). Actions taken to protect the climate result in reducing the consumption of hard coal in the European Union. Between 1990 and 2014, the consumption of hard coal decreased by 41% (a decrease of 126 million toe), and the average rate of decline in consumption of this fuel amounted to −2.1%. Throughout the EU, households are not as significant a consumer of hard coal, as in Poland. Although EU28’s coal consumption in this sector in the years 1990 to 2014 varied between 6.5–15.8 million toe, its share in the overall consumption of this fuel usually maintained at around 3–5%. The changing fuel mix, closing of mines or gradual extinction of coal mining, environmental policy of the individual countries meant that coal has lost its position in some of them. Analyzing the structure of hard coal consumption by households in the EU28 countries in the years 1900 to 2014, one may notice that the leaders are those countries that have their own coal mines. Due to the structure of consumption of hard coal by the customers, the article discussed two countries: Poland and Great Britain in greater detail. In 1990, Poland (50%) and Britain (18%) were close leaders, and twenty-five years later, only Poland has remained in first place (84%) and Great Britain has fallen to fourth place (4%). Between 2014 and 1990, the consumption of hard coal by the British residential sector decreased by 88% to only 0.3 million toe. In the case of Poland, it admittedly decreased by 6%, but still exceeds 6 million toe. The decrease in hard coal consumption in Great Britain was largely a consequence of The Clean Air Act introduced in 1956. In Britain, the process of replacing coal with other fuels (mostly natural gas) lasted several decades. Domestic coal was replaced with another mainly domestic resource – natural gas which ensured the security of its supply. The article also describes the households in the European Union and in Poland. The overall housing stock was taken into account, together with the distribution of population according to the degree of urbanization. Regulations that have a significant impact on the consumption of energy in the European Union were also discussed.


2016 ◽  
Vol 861 ◽  
pp. 198-205
Author(s):  
Anton Pitonak ◽  
Martin Lopusniak

In the members states of the European Union, portion of buildings in the total consumption of energy represents 40%, and their portion in CO2 emissions fluctuates around 35%. The European Union is trying to protect the environment by reducing energy demand and releasing CO2 emissions into the air. Energy performance is the quantity of energy, which is necessary for heating and domestic hot water production, for cooling and ventilation and for lighting. Based on results of energy performance, individual buildings are classified into energy classes A to G. A global indicator (primary energy) is the decisive factor for final evaluation of the building. The new building must meet minimum requirements for energy performance, i.e. it must be classified to energy class A1 since 2016, and to energy class A0 since 2020. The paper analyses effect of the use of different resources of heat in a family house designed according to requirements valid since 2020, and its subsequent classification into an energy class.


2018 ◽  
Vol 175 ◽  
pp. 04029
Author(s):  
Yuyang Miao ◽  
Chenggang Liu ◽  
Xinjiang Huang

Energy consumption of HVAC system play a big role on the whole building energy usage. Recommissioning on HVAC system can improve build comfort and its performance. Taking the recommissioning of public office as an example, the issue of the energy consumption of HVAC system was found, control scheme of chilled and hot water system and AHUs was optimized, the new energy saving control scheme was determined, and the actual energy consumption was analysed. The result show that recommissioning for the public office building achieved obviously effect, and the rate of energy saving is 18%, 33% and 10% for chilled water, hot water and electricity, respectively.


2013 ◽  
Vol 771 ◽  
pp. 155-158
Author(s):  
Zu Shan Hu ◽  
Jian Yao

This paper calculates the energy and environmental performance of a project with solar hot water system using solar hot water system with vacuum tube materials. The results show that solar hot water application in buildings not only saves energy consumption but also reduces carbon emissions, and the dynamic payback period is about 12 years. Thus solar hot water system should be widely used in buildings in China.


Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4938
Author(s):  
Hellinton H. Takada ◽  
Celma O. Ribeiro ◽  
Oswaldo L. V. Costa ◽  
Julio M. Stern

Primary energy consumption is one of the key drivers of global CO2 emissions that, in turn, heavily depends on the efficiency of involved technologies. Either improvement in technology efficiency or the expansion of non-fossil fuel consumption requires large investments. The planning and financing of such investments by global policy makers or global energy firms require, in turn, reliable measures of associated global spread and their evolution in time, at least from the point of view of the principles for responsible investment (PRI). In this paper, our main contribution is the introduction of index measures for accessing global spread (that is, measures of inequality or inhomogeneity in the statistical distribution of a related quantity of interest) of technology efficiency and CO2 emission in primary energy consumption. These indexes are based on the Gini index, as used in economical sciences, and generalized entropy measures. Regarding primary energy sources, we consider petroleum, coal, natural gas, and non-fossil fuels. Between our findings, we attest some stable relations in the evolution of global spreads of technology efficiency and CO2 emission and a positive relation between changes in global spread of technology efficiency and use of non-fossil fuel.


Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5531 ◽  
Author(s):  
Taro Mori ◽  
Yusuke Iwama ◽  
Hirofumi Hayama ◽  
Emad Mushtaha

Hot water supply is one of the leading consumers of energy in the building sector in cold climate areas. The use of woody biomass is effective in reducing CO2 emissions in hot-water supply systems. This report deals with a system that combines a wood pellet boiler (PB) and a heat pump system with CO2 (CO2HP) that is used in a facility for disabled people. The following research was conducted. The operation of a hybrid system combining a PB and CO2HPs was investigated. While operating the system, four specific operations were developed as countermeasures to save on costs and reduce system troubles while reducing CO2 emissions. The processes and results are introduced. Numerical simulations were carried out to optimize the operation. The hot water temperature, water volume, and hot water loads were simulated. The influence of the water volume ratio on the cost and primary energy consumption under the requirements for safe system operation was studied. The regional economic ripple effects (REREs) of this system were studied. The wood pellet boiler is not only a measure for reducing primary energy consumption but can also play an important role in a regional economy for sustainable development in countries that import energy resources such as Japan.


Author(s):  
Vittorio Verda ◽  
Giorgia Baccino ◽  
Stefano Pizzuti

In this paper, a solar cooling installation is analyzed with the aim of optimizing its performances. The system consists of vacuum solar collectors, which supply hot water to a LiBr absorption chiller. A boiler can be used to supply an additional amount of hot water in the case of insufficient solar radiation. In addition, a vapor compression chiller operates as a backup system and integrates the solar driven system in the case of large cooling request. Such system gives multiple operating options, especially at partial load. A model of the system is presented and applied to the real plant. It is shown that if a multi-objective optimization is performed, considering minimum primary energy consumption from fossil fuel and maximum utilization of the absorption system, a Pareto front is obtained. This occurs because the two objective functions are competing. A control strategy based on the use of neural networks is presented. Input variables are the solar radiation, ambient temperature and the cooling request. In this work the control strategy is adjusted in order to reach the minimum fossil energy consumption, but the same approach can be applied with other objective functions.


Sign in / Sign up

Export Citation Format

Share Document