Analysis of Energy Sources on Energy Indicators Performance

2016 ◽  
Vol 861 ◽  
pp. 198-205
Author(s):  
Anton Pitonak ◽  
Martin Lopusniak

In the members states of the European Union, portion of buildings in the total consumption of energy represents 40%, and their portion in CO2 emissions fluctuates around 35%. The European Union is trying to protect the environment by reducing energy demand and releasing CO2 emissions into the air. Energy performance is the quantity of energy, which is necessary for heating and domestic hot water production, for cooling and ventilation and for lighting. Based on results of energy performance, individual buildings are classified into energy classes A to G. A global indicator (primary energy) is the decisive factor for final evaluation of the building. The new building must meet minimum requirements for energy performance, i.e. it must be classified to energy class A1 since 2016, and to energy class A0 since 2020. The paper analyses effect of the use of different resources of heat in a family house designed according to requirements valid since 2020, and its subsequent classification into an energy class.

2014 ◽  
Vol 1041 ◽  
pp. 222-225
Author(s):  
Michal Kraus ◽  
Kateřina Kubenková ◽  
Darja Kubečková

The evaluation of non-renewable primary energy expressing the impact of the environment is part of the energy performance certificate. The evaluation is based on factors of primary energy. New buildings or larger modifications of existing buildings must meet the legislative requirements in the Czech Republic, which are consistent with the requirements of the European Union. On the basis of modeling of different energy sources and different number of energy sources for the selected building are set values of non-renewable primary energy.


Author(s):  
Marta Skiba ◽  
Natalia Rzeszowska

Climate change and sustainable energy use is one of the five long-term objectives of the European Union. The first stage of the activities involving the implementation of this task is to reduce energy consumption of buildings to a minimum by 2020 and, in the case of public buildings by 2019. The purpose of this article is a search for the optimal way of bringing the energy performance of an existing school to a level that enables implementation of the objectives of the European Union energy policy. An analysis of the current condition of the existing school building has been carried out and options of its deep thermal upgrading has been proposed to adjust each parameter the energy performance to current guidelines specified in the technical conditions. One of the possible ways to improve the energy efficiency of the school is the use of renewable energy sources as a means of improving energy characteristics in terms of primary energy PE, the other one - optimization of renovation spending.


2018 ◽  
Vol 13 (1) ◽  
pp. 59-69
Author(s):  
Anton Pitonak ◽  
Martin Lopusniak ◽  
Miloslav Bagona

Abstract In countries of the European Union, the proportion of buildings in the overall energy consumption represents 40% and their proportion in CO2 emissions 35%. Taking into account dependence of the European Union on import of energy, this represents large quantity of energy and CO2 emissions, in spite of the fact that there exist effective solutions for reduction of building energy demand. In Directive 20-20-20, the European Union adopted three main commitments of fulfillment criteria by 2020. On the basis of this directive, the Slovak Republic declares support of renovation of apartment dwelling houses. Taking into account the fact that state subsidy can be obtained only once, and energy requirements of the European Union are increasingly stricter, a comprehensive approach to renovation of buildings is inevitable. At the same time, it is inevitable to propose the renovation of buildings taking into account requirements stated for buildings for year 2020. Two areas were compared within the case study taking into account primary energy and the quantity of CO2 emissions. Both areas have the same built-up area, but one of them is a district city and the second is a suburb. From results it is obvious that the quantity of primary energy is lower by 88% in the district city than in the suburb. The quantity of CO2 emissions is lower by 69% in the district city than in the suburb.


Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4864
Author(s):  
Axel Bruck ◽  
Santiago Díaz Ruano ◽  
Hans Auer

Urban areas have been responsible for the majority of the European Union (EU)-wide primary energy demand and CO2 emissions. To address this issue, the European Union introduced the concept of Positive Energy Districts (PEDs). PEDs are required to have an annual positive primary energy balance. However, if directly addressed in the literature, this energy balance only includes annually fixed primary energy factors and often neglects grid impacts. To bridge this gap, this work proposes a mathematical optimisation approach for PEDs, working towards an open-source model. The model’s main novelty is an hourly primary energy balance constraint. The performed case study on the island La Palma for both an urban and a rural neighbourhood show that the PED concept has a higher net present value (NPV) than solely buying electricity from the grid in all feasible cases. Depending on the space available for PV installations, the NPV increases between 29 and 31% and 25–27% for the rural and urban PED scenarios, respectively. However, in the scenarios with reduced grid impact, the NPV decreases due to the expensive battery installations. Comparing the significantly fossil-based electricity grid mix of La Palma with the renewable-based one of El Hierro shows that the primary energy-based optimisation has more room for flexibility in the high renewable mix. While the dynamic primary energy balance constraint appears promising for operational optimisation, the allocation of correct primary energy factors is crucial.


Author(s):  
Almas Heshmati ◽  
Shahrouz Abolhosseini

This chapter reviews relevant literature on the current state and effectiveness of developing renewable energy on energy security in general, and on energy security in the European Union (EU) in particular. The chapter elaborates on primary energy import sources, possible alternatives, and how energy security is affected by the sources of supply. It also gives an analysis of the effects of the Ukrainian crisis, the isolation of Iran on diversification sources, and on European energy security. It examines EU’s energy policy, analyses the best motivation for a new energy policy direction within Europe, and suggests alternative solutions for enhanced energy supply security. The aim is to suggest suitable solutions for energy security in Europe through energy supply diversification. Supply diversification includes alternative energy corridors for reducing dependency on Russia as a supplier and enhancing the power generated by renewable energy sources under the European Union 2020 strategy.


Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1226
Author(s):  
Beatriz Fraga-De Cal ◽  
Antonio Garrido-Marijuan ◽  
Olaia Eguiarte ◽  
Beñat Arregi ◽  
Ander Romero-Amorrortu ◽  
...  

Prefabricated solutions incorporating thermal insulation are increasingly adopted as an energy conservation measure for building renovation. The InnoWEE European project developed three technologies from Construction and Demolition Waste (CDW) materials through a manufacturing process that supports the circular economy strategy of the European Union. Two of them consisted of geopolymer panels incorporated into an External Thermal Insulation Composite System (ETICS) and a ventilated façade. This study evaluates their thermal performance by means of monitoring data from three pilot case studies in Greece, Italy, and Romania, and calibrated building simulation models enabling the reliable prediction of energy savings in different climates and use scenarios. Results showed a reduction in energy demand for all demo buildings, with annual energy savings up to 25% after placing the novel insulation solutions. However, savings are highly dependent on weather conditions since the panels affect cooling and heating loads differently. Finally, a parametric assessment is performed to assess the impact of insulation thickness through an energy performance prediction and a cash flow analysis.


2016 ◽  
Vol 32 (3) ◽  
pp. 5-22 ◽  
Author(s):  
Katarzyna Stala-Szlugaj

Abstract Due to the important role of hard coal in the Polish residential sector, the article traced the changes that have occurred in the use of this fuel in the European Union and in Poland in the years 1990–2014. Throughout the European Union, hard coal has an important place in the structure of primary energy consumption. In the years 1990–2014, primary energy consumption in the European Union (calculated for all 28 Member States) has changed between 1507 and 1722 million toe. Between 2014 and 1990, there was a decrease of primary energy consumption, and the average rate of decline amounted to −0.2%. According to Council Directive 2013/12/EU, by the year 2020 energy consumption throughout the EU is expected to be no more than 1483 Mtoe of primary energy, and already in 2014 total primary energy consumption in the EU28 was higher than assumed by this target by only about 24 million toe (2%). Actions taken to protect the climate result in reducing the consumption of hard coal in the European Union. Between 1990 and 2014, the consumption of hard coal decreased by 41% (a decrease of 126 million toe), and the average rate of decline in consumption of this fuel amounted to −2.1%. Throughout the EU, households are not as significant a consumer of hard coal, as in Poland. Although EU28’s coal consumption in this sector in the years 1990 to 2014 varied between 6.5–15.8 million toe, its share in the overall consumption of this fuel usually maintained at around 3–5%. The changing fuel mix, closing of mines or gradual extinction of coal mining, environmental policy of the individual countries meant that coal has lost its position in some of them. Analyzing the structure of hard coal consumption by households in the EU28 countries in the years 1900 to 2014, one may notice that the leaders are those countries that have their own coal mines. Due to the structure of consumption of hard coal by the customers, the article discussed two countries: Poland and Great Britain in greater detail. In 1990, Poland (50%) and Britain (18%) were close leaders, and twenty-five years later, only Poland has remained in first place (84%) and Great Britain has fallen to fourth place (4%). Between 2014 and 1990, the consumption of hard coal by the British residential sector decreased by 88% to only 0.3 million toe. In the case of Poland, it admittedly decreased by 6%, but still exceeds 6 million toe. The decrease in hard coal consumption in Great Britain was largely a consequence of The Clean Air Act introduced in 1956. In Britain, the process of replacing coal with other fuels (mostly natural gas) lasted several decades. Domestic coal was replaced with another mainly domestic resource – natural gas which ensured the security of its supply. The article also describes the households in the European Union and in Poland. The overall housing stock was taken into account, together with the distribution of population according to the degree of urbanization. Regulations that have a significant impact on the consumption of energy in the European Union were also discussed.


Energies ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2942 ◽  
Author(s):  
Karol Tucki ◽  
Olga Orynycz ◽  
Antoni Świć ◽  
Mateusz Mitoraj-Wojtanek

The article analyzes the dynamics of the development of the electromobility sector in Poland in the context of the European Union and due to the economic situation and development of the electromobility sector in the contexts of Switzerland and Norway. On the basis of obtained data, a forecast was made which foresees the most likely outlook of the electric car market in the coming years. The forecast was made using the creeping trend method, and extended up to 2030. As part of the analysis of the effect of the impact of electromobility, an original method was proposed for calculating the primary energy factor (PEF) primary energy ratio in the European Union and in its individual countries, which illustrates the conversion efficiency of primary energy into electricity and the overall efficiency of the power system. The original method was also verified, referring to the methods proposed by the Fraunhofer-Institut. On the basis of all previous actions and analyses, an assessment was made of the impact of the development of the electromobility sector on air quality in the countries studied. Carbon dioxide tank-to-wheels emission reductions which result from the conversion of the car fleet from conventional vehicles to electric motors were then calculated. In addition to reducing carbon dioxide emissions, other pollutant emissions were also calculated, such as carbon monoxide (CO), nitrogen oxides (NOx) and particulate matter (PM). The increase in the demand for electricity resulting from the needs of electric vehicles was also estimated. On this basis, and also on the basis of previously calculated primary energy coefficients, the emission reduction values have been adjusted for additional emissions resulting from the generation of electricity in power plants.


2020 ◽  
Vol 160 ◽  
pp. 01004 ◽  
Author(s):  
Stanislav Chicherin ◽  
Lyazzat Junussova ◽  
Timur Junussov

Proper adjustment of domestic hot water (DHW) load structure can balance energy demand with the supply. Inefficiency in primary energy use prompted Omsk DH company to be a strong proponent of a flow controller at each substation. Here the return temperature is fixed to the lowest possible value and the supply temperature is solved. Thirty-five design scenarios are defined for each load deviation index with equally distributed outdoor temperature ranging from +8 for the start of a heating season towards extreme load at temperature of -26°C. All the calculation results are listed. If a flow controller is installed, the customers might find it suitable to switch to this type of DHW supply. Considering an option with direct hot water extraction as usual and a flow controller installed, the result indicates that the annual heat consumption will be lower once network temperatures during the fall or spring months are higher. The heat load profiles obtained here may be used as input for a simulation of a DH substation, including a heat pump and a tank for thermal energy storage. This design approach offers a quantitative way of sizing temperature levels in each DH system according to the listed methodology and the designer's preference.


Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4337
Author(s):  
Daniel González-Prieto ◽  
Yolanda Fernández-Nava ◽  
Elena Marañón ◽  
Maria Manuela Prieto

The use of lightweight concrete for the construction of single-family houses has become increasingly popular in Spain. In this paper, single-family houses with different shape factors and window-to-wall ratios are analysed from both a thermal and environmental perspective using Passive House Planning Package (PHPP) software to calculate the energy demand. The study has been carried out for different Atlantic microclimates (coastal, inland, and mountain) in northern Spain. What most affects the thermal energy used for air conditioning is the variation of the microclimates, so the study focuses mainly on this aspect. Operational energy for heating has decreased greatly via the use of high degree of insulation and hence the next task is to decrease the total energy consumed taking into account the embodied energy. Impacts on Primary Energy and Global Warming Potential are calculated using a cradle-to-grave approach. The energy use for heating and domestic hot water is analysed for different thicknesses of insulation under three energy supply scenarios: electricity only (for 2018 and with the Spanish decarbonisation plan for 2030); heat pump plus electricity; and natural gas boiler. Even for houses with a good level of insulation, the ratio of operational-to-total impacts varies significantly: from 46% to 87% for primary energy and from 31% to 75% for global warming potential, depending on the shape factor of the house, the microclimate and the heat supply scenario. By applying future environmental policies, electricity can become a more environmentally friendly option than natural gas.


Sign in / Sign up

Export Citation Format

Share Document