scholarly journals Derivation of the Variants of the Burgers Model Using a Thermodynamic Approach and Appealing to the Concept of Evolving Natural Configurations

Fluids ◽  
2018 ◽  
Vol 3 (4) ◽  
pp. 69 ◽  
Author(s):  
Josef Málek ◽  
Kumbakonam Rajagopal ◽  
Karel Tůma
Keyword(s):  
Chemical Engineering ◽  
Second Order ◽  
The Body ◽  
Thermodynamic Approach ◽  
Fluid Models ◽  
Burgers Model ◽  
Natural Configuration ◽  
Material Sciences ◽  
Derivatives Of ◽  
Rate Type

Viscoelastic rate-type fluid models involving the stress and frame-indifferent time derivatives of second order, like those in Burgers’ model, are used to describe the complicated response of fluid like materials that are endowed with a complex microstructure that allows them to possess two different relaxation mechanisms as well as other non-Newtonian characteristics. Such models are used in geomechanics, biomechanics, chemical engineering and material sciences. We show how to develop such rate-type fluid models that include the classical Burgers’ model as well as variants of Burgers’ model, using a thermodynamic approach based on constitutive assumptions for two scalar quantities (namely, how the material stores energy and how the energy is dissipated) and appealing to the concept of natural configuration associated with the placement of the body that evolves as the body deforms.

Analysis of the First Order and Slowly Varying Motions of an Axisymmetric Floating Body in Bichromatic Waves

2013 ◽  
Vol 135 (1) ◽  
Author(s):  
João Pessoa ◽  
Nuno Fonseca ◽  
C. Guedes Soares
Keyword(s):  
Vertical Cylinder ◽  
Vertical Axis ◽  
Second Order ◽  
The Body ◽  
Floating Body ◽  
Drift Motion ◽  
First Order ◽  
Motion Responses ◽  
Simple Geometry ◽  
Good Agreement

The paper presents an experimental and numerical investigation on the motions of a floating body of simple geometry subjected to harmonic and biharmonic waves. The experiments were carried out in three different water depths representing shallow and deep water. The body is axisymmetric about the vertical axis, like a vertical cylinder with a rounded bottom, and it is kept in place with a soft mooring system. The experimental results include the first order motion responses, the steady drift motion offset in regular waves and the slowly varying motions due to second order interaction in biharmonic waves. The hydrodynamic problem is solved numerically with a second order boundary element method. The results show a good agreement of the numerical calculations with the experiments.

scholarly journals Sensitivity of the Second Order Homogenized Elasticity Tensor to Topological Microstructural Changes

2021 ◽  
Author(s):  
V. Calisti ◽  
A. Lebée ◽  
A. A. Novotny ◽  
J. Sokolowski
Keyword(s):  
Circular Inclusion ◽  
Elasticity Tensor ◽  
Second Order ◽  
Topological Derivative ◽  
Microstructural Changes ◽  
Topological Derivatives ◽  
Spatial Dimensions ◽  
Elasticity Tensors ◽  
Derivatives Of ◽  
Optimization Of Microstructures

AbstractThe multiscale elasticity model of solids with singular geometrical perturbations of microstructure is considered for the purposes, e.g., of optimum design. The homogenized linear elasticity tensors of first and second orders are considered in the framework of periodic Sobolev spaces. In particular, the sensitivity analysis of second order homogenized elasticity tensor to topological microstructural changes is performed. The derivation of the proposed sensitivities relies on the concept of topological derivative applied within a multiscale constitutive model. The microstructure is topologically perturbed by the nucleation of a small circular inclusion that allows for deriving the sensitivity in its closed form with the help of appropriate adjoint states. The resulting topological derivative is given by a sixth order tensor field over the microstructural domain, which measures how the second order homogenized elasticity tensor changes when a small circular inclusion is introduced at the microscopic level. As a result, the topological derivatives of functionals for multiscale models can be obtained and used in numerical methods of shape and topology optimization of microstructures, including synthesis and optimal design of metamaterials by taking into account the second order mechanical effects. The analysis is performed in two spatial dimensions however the results are valid in three spatial dimensions as well.

scholarly journals On the derivatives of the principal invariants of a second-order tensor

1986 ◽  
Vol 16 (2) ◽  
pp. 221-224 ◽  
Author(s):  
Donald E. Carlson ◽  
Anne Hoger
Keyword(s):  
Second Order ◽  
Order Tensor ◽  
Derivatives Of

Drift Forces on a Floating Body of Simple Geometry Due to Second Order Interactions Between Pairs of Harmonics With Different Frequencies

2009 ◽  
Author(s):  
Joa˜o Pessoa ◽  
Nuno Fonseca ◽  
C. Guedes Soares
Keyword(s):  
Vertical Cylinder ◽  
Vertical Axis ◽  
Second Order ◽  
The Body ◽  
Floating Body ◽  
Order Problem ◽  
Simple Geometry ◽  
The Mean ◽  
Order Quantities ◽  
Drift Forces

The paper presents an investigation of the slowly varying second order drift forces on a floating body of simple geometry. The body is axis-symmetric about the vertical axis, like a vertical cylinder with a rounded bottom and a ratio of diameter to draft of 3.25. The hydrodynamic problem is solved with a second order boundary element method. The second order problem is due to interactions between pairs of incident harmonic waves with different frequencies, therefore the calculations are carried out for several difference frequencies with the mean frequency covering the whole frequency range of interest. Results include the surge drift force and pitch drift moment. The results are presented in several stages in order to assess the influence of different phenomena contributing to the global second order responses. Firstly the body is restrained and secondly it is free to move at the wave frequency. The second order results include the contribution associated with quadratic products of first order quantities, the total second order force, and the contribution associated to the free surface forcing.

THREE DIMENSIONAL INTERPRETATION OF GRAVITATIONAL ANOMALIES

Geophysics ◽  
1952 ◽  
Vol 17 (2) ◽  
pp. 344-364 ◽  
Author(s):  
Fraser S. Grant
Keyword(s):  
Gravitational Field ◽  
Mass Distribution ◽  
Three Dimensional ◽  
Relaxation Method ◽  
The Body ◽  
Multipole Moments ◽  
Size And Shape ◽  
Surface Field ◽  
Derivatives Of

A method is developed for determining the approximate size and shape of the three‐dimensional mass distribution that is required to produce a given gravitational field. The first few reduced multipole moments of the distribution are calculated from the derivatives of the surface field, and the approximative structure is determined from the values of these moments and a knowledge of the density contrast between the body and its surroundings. A system of classification of problems by symmetry is introduced and its practical usage discussed. A relaxation method is described which may be used to adjust the initial solution systematically to give agreement over the whole field. A descriptive discussion is appended.

Sign in / Sign up

Export Citation Format

Share Document