scholarly journals Comparing Accuracy of Implant Installation with a Navigation System (NS), a Laboratory Guide (LG), NS with LG, and Freehand Drilling

2020 ◽  
Vol 17 (6) ◽  
pp. 2107 ◽  
Author(s):  
Ting-Mao Sun ◽  
Huey-Er Lee ◽  
Ting-Hsun Lan
Keyword(s):  
Dental Implants ◽  
Dental Implant ◽  
Navigation System ◽  
Surgical Guide ◽  
Implant Placement ◽  
Surgical Methods ◽  
Cone Beam Computerized Tomography ◽  
The One ◽  
Dental Implant Surgery ◽  
Missing Tooth

The aim of this study was to compare the accuracy of implant placement by using the conventional freehand method, the surgical guide alone, the dental navigation system alone, and the dental navigation system with a surgical guide. The participants were aged 20 years or older and were requiring dental implant surgery according to an assessment made by a dentist between July 2014 and December 2017. A total of 128 dental implants were inserted, 32 dental implants in each group, and participants with similar or identical age (i.e., 20–50 years or 50 years or above) and missing tooth locations were paired for comparison. Accuracy was measured by overlaying the real position in the postoperative Cone Beam Computerized Tomography (CBCT) on the virtual presurgical placement of the implant in a CBCT image. Using the dental navigation system with a surgical guide could help dentists to position implants more accurately. Total, longitudinal, and angular error deviation were significantly different (p < 0.0001). The same level of accuracy could be obtained for the different jaws and tooth positions. The one-way analysis of variance (ANOVA) showed that the total, longitudinal, and angular errors differed significantly (p < 0.0001). A comparison of the four dental implant surgical methods indicated that the combination of a dental implant navigation system and a surgical guide kit achieved the highest accuracy in terms of the different tooth positions and jaws.

Evaluation of the accuracy of a novel surgical guide for flapless dental implant placement for immediate loading in edentulous jaws

2021 ◽  
Author(s):  
Giovanni de Almeida Prado Di Giacomo ◽  
Patrícia Cury ◽  
Airton Moreira da Silva ◽  
Jorge Vicente Lopes da Silva ◽  
Carlos Eduardo Pompeo Souto ◽  
...  
Keyword(s):  
Dental Implants ◽  
Dental Implant ◽  
Selective Laser Sintering ◽  
Apical Region ◽  
Virtual Planning ◽  
Surgical Guide ◽  
Implant Placement ◽  
Surgical Guides ◽  
Edentulous Jaws ◽  
Edentulous Jaw

This study was designed to evaluate the accuracy of a novel computer-designed and selectively laser sintered surgical guide for flapless dental implant placement in the edentulous jaw. Fifty dental implants were placed in 11 patients with at least one totally edentulous jaw. Initially, cone-beam computed tomography (CBCT) was performed in each patient to define the virtual position of the dental implants based on the assessment of bone availability and the proposed dental prosthesis. After virtual planning, 3D surgical guides were printed using selective laser sintering. CBCT was repeated after the surgery, and the pre-and postoperative images were overlapped in the CAD software to compare the planned and actual positions of the dental implants using a one-sample t-test. The mean ± angular standard deviation between the long axes of the planned and final dental implant positions was 4.58 ±2.85 degrees; The linear deviation in the coronal position was  0.87 ± 0.49 mm and  in the apical region of the dental implants was 1.37 ± 0.69 mm. These differences were statistically significant (p &lt;0.001). The proposed modifications reduced the deviations, resulting in an improvement in the technique. We were able to place implants and temporary prostheses using the present protocol, taking into account the differences between the planned and final positions of the dental implants.

scholarly journals Accuracy of Computer-Aided Dynamic Navigation Compared to Computer-Aided Static Navigation for Dental Implant Placement: An In Vitro Study

2019 ◽  
Vol 8 (12) ◽  
pp. 2123 ◽  
Author(s):  
Alfonso Mediavilla Guzmán ◽  
Elena Riad Deglow ◽  
Álvaro Zubizarreta-Macho ◽  
Rubén Agustín-Panadero ◽  
Sofía Hernández Montero
Keyword(s):  
Dental Implants ◽  
Dental Implant ◽  
Navigation System ◽  
T Test ◽  
Implant Placement ◽  
Planning Software ◽  
Computer Aided ◽  
Dynamic Navigation ◽  
Group A ◽  
Group B

Aim: To analyze the accuracy capability of two computer-aided navigation procedures for dental implant placement. Materials and Methods: A total of 40 dental implants were selected, which were randomly distributed into two study groups, namely, group A, consisting of those implants that were placed using a computer-aided static navigation system (n = 20) (guided implant (GI)) and group B, consisting of those implants that were placed using a computer-aided dynamic navigation system (n = 20) (navigation implant (NI)). The placement of the implants from group A was performed using surgical templates that were designed using 3D implant-planning software based on preoperative cone-beam computed tomography (CBCT) and a 3D extraoral surface scan, and the placement of group B implants was planned and performed using the dynamic navigation system. After placing the dental implants, a second CBCT was performed and the degree of accuracy of the planning and placement of the implants was analyzed using therapeutic planning software and Student’s t-test. Results: The paired t-test revealed no statistically significant differences between GI and NI at the coronal (p = 0.6535) and apical (p = 0.9081) levels; however, statistically significant differences were observed between the angular deviations of GI and NI (p = 0.0272). Conclusion: Both computer-aided static and dynamic navigation procedures allow accurate implant placement.

scholarly journals One-piece Implant Placement as an Alternative and Acceptable Treatment for Missing Tooth Rehabilitation: A Case Report

2021 ◽  
Vol 16 (Supp. 1) ◽  
pp. 67-72
Author(s):  
Paulus Budi Teguh ◽  
Chaterina Diyah Nanik
Keyword(s):  
Case Report ◽  
Soft Tissue ◽  
Female Patient ◽  
Dental Implant ◽  
Implant Placement ◽  
Therapy Choice ◽  
The One ◽  
Bone Height ◽  
Implant Treatment ◽  
Missing Tooth

Currently dental implant treatment become popular. More clinicians are being presented with the opportunity to perform implant services in their own practice. The use of one-piece implant can be considered as treatment for the replacement of missing tooth in the areas of limited tooth-to-tooth spacing and would bring less trauma for the soft tissue. A 52-year-old female patient presented with difficulty in mastication due to the loss of teeth of 35 region with limitation mesio distal space. Radiology examination did not reveal any radiolucencies in 35 region. Radiograph revealed sufficient bone height from crestal to the floor of the mandible. A one-piece implant was placed in the 35 region. The present case used an endosteal implant, one stage surgery, and delayed loading. Restoration with porcelain fused to the metal crown had been delivered three months after the one-piece implant placement. The result of this treatment indicated that one-piece implant could be considered as an effective therapy choice for replacement of missing tooth in order to rehabilitate the masticatory function.

A STUDY ON CLINICAL AND X - RAY FEATURES OF PARTIALLY&NBSP; EDENTULOUS PATIENTS WITH DENTAL IMPLANT

2011 ◽  
pp. 96-103
Author(s):  
Quang Hai Nguyen ◽  
Toai Nguyen
Keyword(s):  
Dental Implants ◽  
Dental Implant ◽  
Tooth Loss ◽  
Permanent Teeth ◽  
Missing Teeth ◽  
X Ray ◽  
Lower Jaw ◽  
Molar Teeth ◽  
Edentulous Patients ◽  
Missing Tooth

1. Background: Loss of permanent teeth is very common, affected chewing function, speech and aesthetics; restoration of missing teeth with dental implant has several advantages, but we need thoroughly study the clinical and X ray features at the position at missing teeth, then to select the type of implant and make the best plan for the dental implant patients. 2. Materials and method: Cross-section descriptive study. From January 2009 to November 2010, study with 56 patients with 102 implants of MIS and Megagen systems at the Faculty of Odonto-Stomatology, Hue College of Medicine and Pharmacy and Vietnam-Cuba Hospital in Ha Noi. 3. Results: Distributed equally in male and female, common ages 40 – 59 (55,4%), the majority of missing teeth occurs in the lower jaw (63,8%) and especially, the teeth 36 and 46 (25,4%). The majority of missing teeth due to dental caries, dental pulp and apical diseases (64,7%) of the molar teeth (51,9%); the most position of missing tooth have enough bone for dental implants (87,3%), time of tooth loss and bone status in the position of tooth loss are related to each other (p < 0,01). Diameter and length of implant usually used 4.0 – 6.0 mm (63,7%) and 8.5 – 13.0 mm (83,3%). 4. Conclusion: Clinical and X ray features of edentulous patients has an important role in determining the type of implants and treatment planning of dental implants. Key words: Loss of permanent teeth, X ray and clinical features, Dental implant.

scholarly journals Comparative radiographic and resonance frequency analyses of the peri-implant tissue after dental implants placement using flap and flapless techniques: An experimental study on domestic pigs

2013 ◽  
Vol 70 (6) ◽  
pp. 586-594 ◽  
Author(s):  
Zoran Vlahovic ◽  
Branko Mihailovic ◽  
Zoran Lazic ◽  
Mileta Golubovic
Keyword(s):  
Bone Resorption ◽  
Resonance Frequency ◽  
Dental Implants ◽  
Dental Implant ◽  
Surgical Techniques ◽  
Primary Stability ◽  
Implant Stability ◽  
Domestic Pigs ◽  
Flap Technique ◽  
Implant Placement

Background/Aim. Flapless implant surgery has become very important issue during recent years, mostly thanks to computerization of dentistry and software planning of dental implants placements. The aim of this study was to compare flap and flapless surgical techniques for implant placement through radiographic and radiofrequency analyses. Methods. The experiment was made in five domestic pigs. Nine weeks following domestic pigs teeth extraction, implants were placed, on the right side using surgical technique flap, and flapless on the left side. Digital dental Xrays were applied to determine primary dental implant stability quality (ISQ). At certain intervals, not later than three months, the experimental animals were sacrificed, and just before it, control X-rays were applied to measure dental implants stability. Results. Radiographic analysis showed that peri-implant bone resorption in the first 4 weeks following placement implants with flap and flapless surgical techniques was negligible. After the 3 months, mean value of peri-implant bone resorption of the implants placed using flap technique was 1.86 mm, and of those placed using flapless technique was 1.13 mm. In relation to the primary dental implant stability in the first and second week there was an expected decrease in ISQ values, but it was less expressed in the dental implants placed using the flapless technique. In the third week the ISQ values were increased in the dental implants placed by using both techniques, but the increase in flapless implant placement was higher (7.4 ISQ) than in flap implant placement (1.5 ISQ). The upward trend continued in a 4- week period, and after 3 months the dental implant stability values in the implants placed using flap technique were higher than the primary stability for 7.1 ISQ, and in the implants placed using flapless technique were higher comparing to the primary stability for 10.1 ISQ units. Conclusion. Based on the results of radiographic and resonance frequency analyses it can be concluded that the flapless technique in surgical implants placemat, leads to better results.

scholarly journals Bone Remineralization around Dental Implants following Conservative Treatment after Peri-Implantitis

2019 ◽  
Vol 2019 ◽  
pp. 1-6
Author(s):  
Algirdas Puisys ◽  
Viktorija Auzbikaviciute ◽  
Renata Simkunaite-Rizgeliene ◽  
Dainius Razukevicius ◽  
Rokas Linkevicius ◽  
...  
Keyword(s):  
Case Report ◽  
Surgical Treatment ◽  
Conservative Treatment ◽  
Dental Implants ◽  
Dental Implant ◽  
Posterior Part ◽  
Treatment Method ◽  
Color Changes ◽  
Implant Placement ◽  
History Of

The aim of this case report is to show that bone remineralization around dental implants with a history of peri-implantitis is possible after irritant factors are removed and only conservative treatment is performed. Patient came to the clinic after three years of dental implant placement complaining about swelling, sensitivity and gingiva color changes at the posterior part of the maxilla. During radiographic and intraoral examinations peri-implantitis of the #24 implant site was diagnosed. The surgical treatment method was rejected and performed conservative treatment instead. The outcome is promising; periapical radiographs three months later showed bone remineralization as well as stable bone after 10 years. A key clinical message: Bone remineralization around dental implants with a history of peri-implantitis is possible after irritant factors are removed and conservative treatment performed.

Exploring training dental implant placement using computer‐guided implant navigation system for predoctoral students: A pilot study

2019 ◽  
Vol 23 (4) ◽  
pp. 415-423 ◽  
Author(s):  
Janina Golob Deeb ◽  
Sompop Bencharit ◽  
Caroline K. Carrico ◽  
Marija Lukic ◽  
Daniel Hawkins ◽  
...  
Keyword(s):  
Pilot Study ◽  
Dental Implant ◽  
Navigation System ◽  
Implant Placement

A surgical guide for dental implant placement in an edentulous jaw

2008 ◽  
Vol 100 (4) ◽  
pp. 323-325 ◽  
Author(s):  
Peter Y.P. Wat ◽  
Edmond H.N. Pow ◽  
Francis S.W. Chau ◽  
Katherine C.M. Leung
Keyword(s):  
Dental Implant ◽  
Surgical Guide ◽  
Implant Placement ◽  
Edentulous Jaw

scholarly journals Recent Advances in Implant Biomaterials - A Review

2020 ◽  
Vol 11 (4) ◽  
pp. 6962-6965
Author(s):  
Miloni Suresh Shah ◽  
Revathi Duraisamy ◽  
Sindhuja Devi S ◽  
Santhosh Kumar M P
Keyword(s):  
Dental Implants ◽  
Dental Implant ◽  
Dental Materials ◽  
Glass Ceramics ◽  
Recent Period ◽  
Recent Advances ◽  
Dental Practitioners ◽  
Innovative Biomaterials ◽  
Implant Dentistry ◽  
Missing Tooth

Usage of Implants in dentistry is tremendously increasing in recent times. This has led to the invention of new biomaterials for dental implants by the researchers. Continuous evolution has occurred in the field of dental implant biomaterials in the last two decades leading to the emergence of innovative biomaterials. This article summarizes the different implant biomaterials and the recent advances in this field. The material science and they are various biological and physical properties affecting their treatment outcome are discussed. Throughout the years, myriads of dental materials have been tried for replacement of missing tooth. Now titanium remains the gold standard as a dental implant material. Over the recent period, many Implant biomaterials have evolved. It includes composites, glass-ceramics, metal alloys, ceramics, glasses, and polymers. Nanotechnology is an emerging application in the branch of implant dentistry. Nanotechnology can improve the properties of dental implants for achieving good osseointegration. It is imperative for dental practitioners to have a good idea about the various biomaterials used for dental implants. 

Sign in / Sign up

Export Citation Format

Share Document