scholarly journals Varying the Polishing Protocol Influences the Color Stability and Surface Roughness of Bulk-Fill Resin-Based Composites

2020 ◽  
Vol 12 (1) ◽  
pp. 1
Author(s):  
Filipa Freitas ◽  
Teresa Pinheiro de Melo ◽  
António HS Delgado ◽  
Paulo Monteiro ◽  
João Rua ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Surface Properties ◽  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Control Surface ◽  
Significance Level ◽  
Color Changes ◽  
Atomic Force ◽  
Polishing Procedures

Surface properties of composites such as roughness and color impact periodontal health and aesthetic outcomes. Novel bulk-fill composites with improved functionality are being introduced and, in light of the existing variety of finishing/polishing procedures, research of their surface properties is warranted. Sixty discs were prepared from bulk-fill composites (Filtek™ Bulk Fill Posterior Restorative and Fill-Up™) and incremental-fill Filtek™ Z250. They were further divided according to different polishing procedures (n = 5): three multi-step polishing procedures or finishing with a bur (control). Surface roughness (Ra) was measured using an atomic force microscope (The AFM Workshop TT-AFM). A spectrophotometer (Spectroshade Micro Optic) was used to determine color stability, after exposure to a coffee solution. Data were analyzed using two-way MANOVA (significance level of 5%). Resin composite type, polishing procedure, and their interaction had a statistically significant effect on surface roughness (p < 0.001) and color change (p < 0.001). Fill-Up™ exhibited the highest surface roughness and greatest color change. Differences in color change were statistically significant (p < 0.001). Filtek™ Bulk Fill registered the lowest surface roughness and color change, after the three-step polishing procedure. Both parameters were significantly correlated (ρ = 0.754, p < 0.001) and found to be material dependent and polishing-procedure dependent. Higher surface roughness relates to greater color changes.

scholarly journals Effects of Commonly Consumed Beverages on Surface Roughness and Color Stability of the Nano, Microhybrid and Hybrid Composite Resins: An in vitro Study

2013 ◽  
Vol 14 (4) ◽  
pp. 718-723 ◽  
Author(s):  
P Sarveshwar Reddy ◽  
KL Sunil Tejaswi ◽  
Suneeth Shetty ◽  
BM Annapoorna ◽  
Sudarshan C Pujari ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Hybrid Composite ◽  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Composite Resins ◽  
Resin Composites ◽  
Hybrid Resin ◽  
Color Changes

ABSTRACT Background Consumption of certain beverages may affect the esthetic and physical properties of the resin composite, thereby undermining the quality of restorations. Aim To analyze the effect of three beverages (cola, coffee, tea) on color stability and surface roughness of three different types of resin composites at various time intervals in vitro. Materials and methods Nano, microhybrid and hybrid resin composites were used. Each material was randomly divided into four equal subgroups of 10 samples each according to the beverages used (cola, coffee, tea, distilled water). The samples were immersed in each beverage for 1, 15 and 30 days. Surface roughness and color changes measurements were noted at the baseline—the first, fifteenth and thirteenth day. Results It was found that nanoresin composite followed by microhybrid and hybrid showed least surface roughness and color change. The Coke beverage subgroup showed more surface roughness and the subgroup coffee has shown more color changes with respect to other subgroups. Conclusion All specimens showed discoloration after completion of the test period which was visually perceptible and clinically unacceptable. At the end of 30th day, among the materials, nanofilled composite resin showed comparatively less surface roughness and color change than microhybrid and hybrid composite resins. How to cite this article Reddy PS, Tejaswi KLS, Shetty S, Annapoorna BM, Pujari SC, Thippeswamy HM. Effects of Commonly Consumed Beverages on Surface Roughness and Color Stability of the Nano, Microhybrid and Hybrid Composite Resins: An in vitro Study. J Contemp Dent Pract 2013;14(4): 718-723.

scholarly journals Effect of Brushing Time and Dentifrice Abrasiveness on Color Change and Surface Roughness of Resin Composites

2015 ◽  
Vol 26 (5) ◽  
pp. 507-513 ◽  
Author(s):  
Lourenço de Moraes Rego Roselino ◽  
Michelle Alexandra Chinelatti ◽  
Carla Cecilia Alandia-Román ◽  
Fernanda de Carvalho Panzeri Pires-de-Souza
Keyword(s):  
Surface Roughness ◽  
Healthy Individual ◽  
Repeated Measures ◽  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Resin Composites ◽  
Repeated Measures Anova ◽  
Bonferroni Test ◽  
Initial Color

Abstract: Dentifrice abrasiveness and brushing time may increase color change (∆E) and surface roughness (∆Ra) of resin composites. This study aimed to evaluate the effect of mechanical brushing time of dentifrices with different abrasiveness on ∆E and ∆Ra of nanofilled (Z350, 3M ESPE) and nanohybrid (Tetric N-Ceram, Ivoclar Vivadent) resin composites. Sixteen specimens (12 mm diameter x 2 mm thick) were fabricated using a white Teflon matrix of each resin composite and a ceramic (IPS e.max Ceram, Ivoclar Vivadent), used as control. After initial color readouts on white backgrounds (Spectrophotometer PCB 6807, Byk Gardner), with D65 standard illuminant, and surface roughness (Rugosimeter Surfcorder SE 1700, Kosalab) with cut-off=0.8 mm and speed=0.25 mm/s, specimens were assigned (n=8) according to the abrasiveness of the dentifrices: RDA* 68 (Colgate) and RDA* 180 (Colgate Total Plus Whitening). Specimens were submitted to mechanical brushing (58,400 cycles) and after every 14,600 cycles (1 year of brushing by a healthy individual), new color and surface roughness readouts were taken. Color stability was calculated by CIEDE2000. Data were analyzed by 3-way repeated measures ANOVA and Bonferroni test (p<0.05), and demonstrated that the dentifrice abrasiveness (p=0.02) and brushing time (p<0.0001) affected the ∆E of nanofilled resin composite. There was no difference on surface roughness of materials (p=0.6752) or brushing time (p=0.7997). In conclusion, the longer the brushing time and dentifrice abrasiveness, the greater the color change of the nanofilled resin composite. The surface roughness was not influenced by dentifrice abrasiveness.

scholarly journals Effect of two polishing systems on color and surface roughness of feldspathic porcelain following orthodontic bracket debonding and composite resin removal

2019 ◽  
Vol 9 ◽  
pp. 105-110
Author(s):  
Nazila Ameli ◽  
Reihane Talaei ◽  
Saeedeh Saeedi ◽  
Raheb Ghorbani ◽  
Bahareh Ali Askari
Keyword(s):  
Surface Roughness ◽  
Color Change ◽  
Orthodontic Bracket ◽  
Force Microscopy ◽  
Color Parameters ◽  
Atomic Force ◽  
Polishing Procedures ◽  
Feldspathic Porcelain ◽  
Group 2 ◽  
Level Of Significance

Objectives Orthodontic bracket removal from a porcelain crown can roughen the surface and lead to plaque accumulation, discoloration, and esthetic problems. Porcelain polishing after debonding is one strategy to decrease such consequences. This study aimed to compare the efficacy of two polishing systems (Sof-Lex discs and Meisinger polishing system) for correction of surface roughness and discoloration of porcelain after orthodontic bracket debonding. Materials and Methods Twenty porcelain blocks were evaluated in two groups of 10. First, the baseline surface roughness and color parameters of the samples were measured using atomic force microscopy and spectrophotometry, respectively. After bracket bonding, a fine cutter was used for bracket debonding, and resin remnants were removed by a tungsten carbide bur and low-speed handpiece. Samples were then polished using Sof-Lex discs (group 1) and Meisinger porcelain polishing kit (group 2). Surface roughness and color parameters were measured again. Data were analyzed using SPSS 18 through the Shapiro–Wilk test, Student’s t-test, and paired t-test at 5% level of significance. Results Porcelain color change (ΔE) was significantly greater in the Meisinger system than Sof-Lex (P < 0.001). The Rq, Ra, and Rt surface roughness parameters significantly increased in both the groups after the intervention compared to baseline (P < 0.05), but the two groups were not significantly different in this respect after the polishing procedures (P > 0.05). Conclusion The porcelain color after polishing with Sof-Lex discs was closer to the baseline. Furthermore, the two systems were not significantly different regarding surface roughness. However, Sof-Lex discs may be recommended due to lower cost.

scholarly journals Can ozone or violet light improve the color change or physicochemical properties of hydrogen peroxide-bleached tooth?

2021 ◽  
Vol 32 (4) ◽  
pp. 19-30
Author(s):  
Nayara Rodrigues Nascimento Oliveira Tavares ◽  
Alexia da Mata Galvão ◽  
Lia Dietrich ◽  
Roberta Furtado Carvalho ◽  
Robinson Sabino Silva ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Surface Roughness ◽  
Color Change ◽  
Repeated Measure ◽  
Color Changes ◽  
Violet Light ◽  
Atomic Force ◽  
Measure Anova ◽  
Before And After ◽  
To Receive

Abstract: This study investigated the bleaching effectiveness and the physicochemical effects on enamel of violet light and ozone, associate or not to hydrogen peroxide, compared to 35%-hydrogen peroxide. Enamel-dentin blocks from human molars were randomly allocated to receive one of the following bleaching protocols (n=15): (HP) 35%-hydrogen peroxide, (VL) violet light, (OZ) ozone, the association between hydrogen peroxide with ozone (OZ+HP) or violet light (VL+HP). All protocols were performed in two sessions with a 48h interval. Color (spectrophotometer) and mineral composition (Raman spectroscopy) were measured before and after the bleaching. Color changes were calculated by ΔEab, ΔE00, and whitening index (WI). The surface roughness was measured with an atomic force microscope. Data were analyzed by One-way or Two-way repeated measure ANOVA followed by the Tukey’s test (α = 0.05). The lowest color change values (either measured by WI, ΔEab, or ΔE00) were observed for VL and OZ used with no HP. Violet light associate with HP was unable to improve the color changes observed for the peroxide alone, in combination with OZ and HP, the highest color changes were verified. Regardless of bleaching protocol, the bleached enamel presented higher contents of PO4 and CO3 -2 than those observed at baseline. All bleaching protocols resulted in similar enamel surface roughness. Both the VL and the OZ caused reduced effects on the enamel color change when used alone. The ozone therapy improved the bleaching effect in the group that received the association of HP.

scholarly journals Nonprescription Bleaching versus Home Bleaching with Professional Prescriptions: Which One is Safer? A Comprehensive Review of Color Changes and Their Side Effects on Human Enamel

2019 ◽  
Vol 13 (04) ◽  
pp. 589-598
Author(s):  
Farhana Omar ◽  
Zuryati Ab-Ghani ◽  
Normastura Abd Rahman ◽  
Mohamad Syahrizal Halim
Keyword(s):  
Surface Roughness ◽  
Over The Counter ◽  
Microscopic Appearance ◽  
Significance Level ◽  
Force Microscopy ◽  
Colorimetric Measurement ◽  
Color Changes ◽  
Atomic Force ◽  
Human Enamel ◽  
Before And After

Abstract Objectives This study evaluates the efficacy and safety of the professionally prescribed and nonprescription over-the-counter (OTC) bleaching agents. Materials and Methods Extracted human upper central incisors were prepared and stained with red wine for 14 days before being subjected to four different bleaching agents: professionally prescribed opalescence PF 15%, VOCO Perfect Bleach 10%, nonprescription OTC Crest 3D Whitestrips, and Whitelight Teeth Whitening System. Colorimetric measurement was performed with Vita Easyshade Handheld Spectrophotometer, enamel surface microhardness measured using Vickers Hardness machine, and surface roughness was evaluated with profilometer, before and after bleaching. Scanning electron microscope (SEM) evaluation and atomic force microscopy were conducted postbleaching. Statistical Analysis The data were analyzed with t-test, two-way ANOVA, one-way ANOVA, and Turkey’s test at a significance level of 5%. Results All bleaching products have the same efficacy to whiten stained enamel. Opalescence PF 15% showed significant increase in the microhardness (92.69 ± 68.316). All groups demonstrated significant increase in surface roughness (p < 0.05). SEM evaluation showed that Opalescence PF 15% resulted in same microscopic appearance as unbleached enamel, while VOCO Perfect Bleach 10%, Whitelight Teeth Whitening System and Crest 3D Whitestrips demonstrated mild to moderate irregularities and accentuated irregularities, respectively. Conclusion Professionally prescribed bleaching agent of Opalescence PF 15% is effective tin whitening the teeth, while the other bleaching products may be effective but also have deleterious effects on the enamel.

scholarly journals Color Shift, Color Stability, and Post-Polishing Surface Roughness of Esthetic Resin Composites

Materials ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1376
Author(s):  
Yara Khalid Alkhadim ◽  
Malak Jameel Hulbah ◽  
Hani Mohammad Nassar
Keyword(s):  
Surface Roughness ◽  
Color Stability ◽  
Distilled Water ◽  
Significance Level ◽  
Color Changes ◽  
Significant Difference ◽  
Color Shift ◽  
Optical Profilometer ◽  
System Data ◽  
Multiple Comparison Methods

The aim of this study was to compare color shift, color stability, and post-polishing surface roughness of esthetic restorative materials. Twenty-five disc-shaped specimens (10 mm in diameter and 2 mm in thickness) from five esthetic resin materials (Z250XT, IPS Empress-Direct, G-ænial, Vit-l-escence, and Ceram.X) were fabricated. Color shift before and immediately after light-curing (∆E0) then color stability after immersion in tea, coffee, berry juice, and distilled water were measured using a spectrophotometer. Color changes were measured after 2 (ΔE2), 4 (ΔE4), 6 (ΔE6), and 8 weeks (ΔE8). Surface roughness values (Rq) were determined using an optical profilometer after polishing using a rotary polishing system. Data were analyzed using ANOVA and multiple comparison methods at 0.05 significance level. There were no significant differences between the tested materials regarding color shift except between Vit-l-escence and Ceram.X (p = 0.033). There was no significant difference between coffee and tea solutions (p = 1.0) and between berry juice and distilled water (p = 0.15). There was no difference between the tested materials regarding Rq (p = 0.057). Ceram.X was associated with the lowest ΔE8 values overall. Tested materials were comparable regarding color shift and post-polishing surface roughness. Susceptibility to staining was dependent on the material.

scholarly journals Effect of finishing and polishing on color stability of a nanofilled resin immersed in different media

2014 ◽  
Vol 43 (5) ◽  
pp. 338-342
Author(s):  
Ana Luísa Botta Martins de OLIVEIRA ◽  
Camila Cruz LORENZETTI ◽  
Patrícia Petromilli Nordi Sasso GARCIA ◽  
Elisa Maria Aparecida GIRO
Keyword(s):  
Stainless Steel ◽  
Composite Resin ◽  
Resin Composite ◽  
Artificial Saliva ◽  
Color Stability ◽  
Steel Mold ◽  
Significance Level ◽  
Significant Difference ◽  
Cielab System ◽  
Polishing Procedures

OBJECTIVE: The purpose of this study was to evaluate the effect of finishing and polishing on color stability of a nanofilled composite resin (Filtek Z350 XT) according to different immersion media.MATERIAL AND METHOD: Composite disks (10 mm diameter, 2 mm thickness) were prepared for each group (n = 6) using a stainless steel mold. The groups were divided according to the presence or absence of finishing and polishing procedure and immersion media (artificial saliva, artificial juice- KAPO(r) Coca-Cola(r)flavors: pineapple, orange, strawberry and grape). The finishing and polishing procedures were performed using Super -Snap(r) disks. The specimens were stored in artificial saliva for 24 hours (baseline) and were analyzed using a color spectrophotometer by CIELab system. Then, they were immersed in different media for 5 minutes, 3 times a day, every 4 hours during 60 days. They were stored in artificial saliva at 37 ± 1°C during the immersion intervals. After this time, new measure of color was performed. The data were analyzed using Kruskall-Wallis test and Mann- Whitney test. The significance level was 5%.RESULT: The results showed that the finishing/polishing not significantly influence the color stability of resin composite (p > 0.05). There was no statistically significant difference in the color stability of the studied resin after immersion in different media (p > 0.05).CONCLUSION: The finishing and polishing procedures and the immersion media did not have influence on color stability of nanofilled resin Filtek Z350 XT.

Color Stability Behavior of Methacrylate-based Resin Composites Polymerized with Light-emitting Diodes and Quartz-Tungsten-Halogen

2015 ◽  
Vol 40 (3) ◽  
pp. 271-281 ◽  
Author(s):  
C Sabatini
Keyword(s):  
Light Emitting Diodes ◽  
Color Change ◽  
Resin Composite ◽  
Filler Particle ◽  
Color Stability ◽  
Resin Composites ◽  
Light Emitting ◽  
Color Changes ◽  
Quartz Tungsten Halogen ◽  
Before And After

SUMMARY Despite significant developments in improving the optical properties of resin composite materials, their color stability remains a challenge. This study aimed to evaluate the shade stability of light-polymerized, methacrylate-based resin composites with different filler particle composition (microfill, minifill, nanohybrids, and microhybrids) polymerized with quartz-tungsten-halogen (QTH) and light-emitting diodes (LED). Methods and Materials Composite discs were fabricated from Tetric EvoCeram, Premise, Artiste, and Beautifil II (nanohybrids); Filtek Supreme Plus and Vit-l-escence (microhybrids); Heliomolar (microfill); and Estelite Sigma Quick (minifill) using a Teflon mold. The specimens were irradiated either with QTH (Elipar 2500; 600 mW/cm2) for 40 seconds or with LED (Bluephase G2; 1200 mW/cm2) for 20 seconds. Color parameters were measured with a colorimeter before and after polymerization and at 24 hours, one week, one month, and three months. Color change was calculated among the different storage periods. Results There was a significant effect of the composite, time, and their interaction (p&lt;0.001) but no effect of the polymerization unit on the color stability. Color changes immediately after polymerization and at 24 hours (4.22 and 3.88 for LED; and 4.08 and 3.82 for QTH) were not significantly different from each other but were both significantly higher than changes after one week (0.96 and 0.78), one month (1.12 and 1.02), and three months (1.27 and 1.11) for LED and QTH, respectively (p&lt;0.001). Conclusions Color changes were observed for all the materials that were dependent on the type of composite but not on the polymerization unit. These color shifts took place primarily immediately after polymerization and after 24 hours and were additive in nature.

scholarly journals Effects of Mouth Rinses on Color Stability of Resin Composites

2008 ◽  
Vol 02 (04) ◽  
pp. 247-253 ◽  
Author(s):  
Cigdem Celik ◽  
Bulem Yuzugullu ◽  
Selim Erkut ◽  
Kıvanc Yamanel
Keyword(s):  
Color Change ◽  
Calculated Data ◽  
Color Stability ◽  
Color Difference ◽  
Distilled Water ◽  
Significance Level ◽  
Color Changes ◽  
Mouth Rinses ◽  
Significant Difference ◽  
Restorative Materials

ABSTRACTObjectives: The aim of this study was to evaluate the effects of 3 commercially available mouth rinses on the color stability of 4 different resin-based composite restorative materials.Methods: Forty disc-shaped specimens (10x2 mm) were prepared from each of the following materials: A nanofill composite Filtek Supreme XT (3M/Espe, St. Paul, MN, USA); a packable lowshrinkage composite, AeliteLS Packable (BISCO, Inc, Shaumburg, IL, USA); nanoceramic compositeresin Ceram-X (Dentsply, Konstanz, Germany); a microhybrid composite, and Aelite All-Purpose Body (BISCO). The specimens were then incubated in distilled water at 37°C for 24 hours. The baseline color values (L*, a*, b*) of each specimen were measured with a colorimeter according to the CIELAB color scale. After baseline color measurements, 10 randomly selected specimens from each group were immersed in 1 of the 3 mouth rinses and distilled water as control. The specimens were stored in 20 mL of each mouth rinse (Oral B Alcohol-free, Listerine Tooth Defense Anti-cavity Fluoride Rinse and Klorhex) for 12 hours. After immersion, the color values of all specimens were remeasured, and the color change value ΔE*ab was calculated. Data were analyzed using a 2-way analysis of variance at a significance level of .05.Results: All specimens displayed color changes after immersion, and there was a statistically significant difference among restorative materials and mouth rinses (P<.05); however, the change was not visually perceptible (ΔE*ab<3.3). The interaction between the effect of mouth rinses and type of restorative materials was not statistically significant (P>.05).Conclusions: It may be concluded that although visually nonperceptible, all resin restorative materials tested showed a color difference after immersion in different mouth rinses. (Eur J Dent 2008;2:247-253)

scholarly journals Color Stability of Restorative Materials in Response to Arabic Coffee, Turkish Coffee and Nescafe

2013 ◽  
Vol 14 (4) ◽  
pp. 681-690 ◽  
Author(s):  
Khalid H Al-Samadani
Keyword(s):  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Color Difference ◽  
Composite Resins ◽  
Color Measurement ◽  
Water Control ◽  
Mean Values ◽  
Significance Level ◽  
Restorative Materials

ABSTRACT Objective To evaluate the effect of Arabic coffee, Turkish coffee and Nescafe on the color stability of four different composite resins after a period of aging time 1, 7 and 30 days. Materials and methods Twenty specimens from each type of tested composite resin material were prepared. Five specimens from each tested material (Z350 XT, Artist, GC and Z250) was evaluated after storage in Arabic coffee, Turkish coffee, Nescafe and distil water (control) at 37°C in a dark container for 1, 7 and 30 days. Color measurement was done using colorimeter based on the CIE L* a* b* color scale. Color differences ΔE*ab, Δb* and Δa* among specimens immersed in distil water and staining coffee beverages were evaluated overtime. Mean values were statistically analyzed with one-way analysis of variance (ANOVA), followed by Tukey test with p < 0.05 as significance level. Results All tested composite resins showed increase color change after a period of 1, 7 and 30 days. The color change ΔE*ab, Δb* and Δa* exhibited by Arabic coffee, in Turkish coffee and Nescafe except Δa*. The highest total color difference ΔE*ab after 30 days was in group A Arabic coffee (ΔE > 1.5 perceivable) and not perceivable in group B Turkish coffee and group C Nescafe. For Δb* all materials discolored toward yellowness after 30 days except Arabic coffee group which shifted from yellowness toward blueness (Δb*> 1.5 perceivable). Conclusion The effect of staining beverages on the resin composite materials increases with time of aging toward yellowness and not perceivable in all groups except with Arabic coffee which had highest effect after 30 days and the discoloration shifted from yellowness to blueness perceivable. How to cite this article Al-Samadani KH. Color Stability of Restorative Materials in Response to Arabic Coffee, Turkish Coffee and Nescafe. J Contemp Dent Pract 2013;14(4):681-690.

Sign in / Sign up

Export Citation Format

Share Document