scholarly journals Effects of Commonly Consumed Beverages on Surface Roughness and Color Stability of the Nano, Microhybrid and Hybrid Composite Resins: An in vitro Study

2013 ◽  
Vol 14 (4) ◽  
pp. 718-723 ◽  
Author(s):  
P Sarveshwar Reddy ◽  
KL Sunil Tejaswi ◽  
Suneeth Shetty ◽  
BM Annapoorna ◽  
Sudarshan C Pujari ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Hybrid Composite ◽  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Composite Resins ◽  
Resin Composites ◽  
Hybrid Resin ◽  
Color Changes

ABSTRACT Background Consumption of certain beverages may affect the esthetic and physical properties of the resin composite, thereby undermining the quality of restorations. Aim To analyze the effect of three beverages (cola, coffee, tea) on color stability and surface roughness of three different types of resin composites at various time intervals in vitro. Materials and methods Nano, microhybrid and hybrid resin composites were used. Each material was randomly divided into four equal subgroups of 10 samples each according to the beverages used (cola, coffee, tea, distilled water). The samples were immersed in each beverage for 1, 15 and 30 days. Surface roughness and color changes measurements were noted at the baseline—the first, fifteenth and thirteenth day. Results It was found that nanoresin composite followed by microhybrid and hybrid showed least surface roughness and color change. The Coke beverage subgroup showed more surface roughness and the subgroup coffee has shown more color changes with respect to other subgroups. Conclusion All specimens showed discoloration after completion of the test period which was visually perceptible and clinically unacceptable. At the end of 30th day, among the materials, nanofilled composite resin showed comparatively less surface roughness and color change than microhybrid and hybrid composite resins. How to cite this article Reddy PS, Tejaswi KLS, Shetty S, Annapoorna BM, Pujari SC, Thippeswamy HM. Effects of Commonly Consumed Beverages on Surface Roughness and Color Stability of the Nano, Microhybrid and Hybrid Composite Resins: An in vitro Study. J Contemp Dent Pract 2013;14(4): 718-723.

scholarly journals Effect of Brushing Time and Dentifrice Abrasiveness on Color Change and Surface Roughness of Resin Composites

2015 ◽  
Vol 26 (5) ◽  
pp. 507-513 ◽  
Author(s):  
Lourenço de Moraes Rego Roselino ◽  
Michelle Alexandra Chinelatti ◽  
Carla Cecilia Alandia-Román ◽  
Fernanda de Carvalho Panzeri Pires-de-Souza
Keyword(s):  
Surface Roughness ◽  
Healthy Individual ◽  
Repeated Measures ◽  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Resin Composites ◽  
Repeated Measures Anova ◽  
Bonferroni Test ◽  
Initial Color

Abstract: Dentifrice abrasiveness and brushing time may increase color change (∆E) and surface roughness (∆Ra) of resin composites. This study aimed to evaluate the effect of mechanical brushing time of dentifrices with different abrasiveness on ∆E and ∆Ra of nanofilled (Z350, 3M ESPE) and nanohybrid (Tetric N-Ceram, Ivoclar Vivadent) resin composites. Sixteen specimens (12 mm diameter x 2 mm thick) were fabricated using a white Teflon matrix of each resin composite and a ceramic (IPS e.max Ceram, Ivoclar Vivadent), used as control. After initial color readouts on white backgrounds (Spectrophotometer PCB 6807, Byk Gardner), with D65 standard illuminant, and surface roughness (Rugosimeter Surfcorder SE 1700, Kosalab) with cut-off=0.8 mm and speed=0.25 mm/s, specimens were assigned (n=8) according to the abrasiveness of the dentifrices: RDA* 68 (Colgate) and RDA* 180 (Colgate Total Plus Whitening). Specimens were submitted to mechanical brushing (58,400 cycles) and after every 14,600 cycles (1 year of brushing by a healthy individual), new color and surface roughness readouts were taken. Color stability was calculated by CIEDE2000. Data were analyzed by 3-way repeated measures ANOVA and Bonferroni test (p<0.05), and demonstrated that the dentifrice abrasiveness (p=0.02) and brushing time (p<0.0001) affected the ∆E of nanofilled resin composite. There was no difference on surface roughness of materials (p=0.6752) or brushing time (p=0.7997). In conclusion, the longer the brushing time and dentifrice abrasiveness, the greater the color change of the nanofilled resin composite. The surface roughness was not influenced by dentifrice abrasiveness.

scholarly journals Varying the Polishing Protocol Influences the Color Stability and Surface Roughness of Bulk-Fill Resin-Based Composites

2020 ◽  
Vol 12 (1) ◽  
pp. 1
Author(s):  
Filipa Freitas ◽  
Teresa Pinheiro de Melo ◽  
António HS Delgado ◽  
Paulo Monteiro ◽  
João Rua ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Surface Properties ◽  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Control Surface ◽  
Significance Level ◽  
Color Changes ◽  
Atomic Force ◽  
Polishing Procedures

Surface properties of composites such as roughness and color impact periodontal health and aesthetic outcomes. Novel bulk-fill composites with improved functionality are being introduced and, in light of the existing variety of finishing/polishing procedures, research of their surface properties is warranted. Sixty discs were prepared from bulk-fill composites (Filtek™ Bulk Fill Posterior Restorative and Fill-Up™) and incremental-fill Filtek™ Z250. They were further divided according to different polishing procedures (n = 5): three multi-step polishing procedures or finishing with a bur (control). Surface roughness (Ra) was measured using an atomic force microscope (The AFM Workshop TT-AFM). A spectrophotometer (Spectroshade Micro Optic) was used to determine color stability, after exposure to a coffee solution. Data were analyzed using two-way MANOVA (significance level of 5%). Resin composite type, polishing procedure, and their interaction had a statistically significant effect on surface roughness (p < 0.001) and color change (p < 0.001). Fill-Up™ exhibited the highest surface roughness and greatest color change. Differences in color change were statistically significant (p < 0.001). Filtek™ Bulk Fill registered the lowest surface roughness and color change, after the three-step polishing procedure. Both parameters were significantly correlated (ρ = 0.754, p < 0.001) and found to be material dependent and polishing-procedure dependent. Higher surface roughness relates to greater color changes.

scholarly journals Color change using HSB color system of dental resin composites immersed in different common Amazon region beverages

2009 ◽  
Vol 39 (4) ◽  
pp. 961-968 ◽  
Author(s):  
Débora da Costa e Silva ◽  
Sanmya Beatriz da Silva Pereira Tiradentes ◽  
Rosana Cristina Pereira Parente ◽  
Maria Fulgência Costa Lima Bandeira
Keyword(s):  
Color Change ◽  
Color Stability ◽  
Amazon Region ◽  
Composite Resins ◽  
Distilled Water ◽  
Resin Composites ◽  
Dental Resin ◽  
Color System ◽  
Initial Color

The purpose of this study is to evaluate in vitro the color stability of composite resins when exposed to beverages with high coloring contents from the Amazon region. 240 samples from four different composite brands (Natural Look, Z350, 4Seasons and Opallis) of hue A3 were fabricated using an acrylic matrix. The samples were stored in distilled water at 37ºC for 24 hours. The initial color (T0) was registered using a Canon EOS Rebel XTi 10 mp camera, and then the samples were divided into four groups (n=15): G1 (coffee), G2 (açaí juice), G3 (energetic guaraná) and G4 (control - distilled water). The samples were exposed to solutions of DES (6hs) and RE (18hs) and placed in a double boiler under constant agitation, at 37ºC for 30 days. The samples were immersed in the coloring solutions for 15 minutes daily. After 7, 15 and 30 days, new photographic registers were made (T1, T2 and T3). The images were analyzed using Corel PHOTO-PAINT 12 software to identify the colors through the HSB system. The Kruskal-Wallis and t tests (p<0.05) demonstrated significant differences in color (hue, saturation and brightness). The results revealed that none of the tested composites showed color stability when exposed to coloring solutions, and that the Amazon region beverages (açaí juice and energetic guaraná) showed to be less coloring than coffee.

scholarly journals Influence of Different Staining Beverages on Color Stability, Surface Roughness and Microhardness of Silorane and Methacrylate-based Composite Resins

2014 ◽  
Vol 15 (3) ◽  
pp. 319-325 ◽  
Author(s):  
Oguz Suleyman Özdemir ◽  
Emel Karaman ◽  
Duygu Tuncer ◽  
Esra Firat ◽  
Sevilay Karahan
Keyword(s):  
Surface Roughness ◽  
Statistical Analysis ◽  
Aluminum Oxide ◽  
Vickers Hardness ◽  
Color Change ◽  
Color Stability ◽  
Composite Resins ◽  
Distilled Water ◽  
Resin Composites ◽  
Water Control

ABSTRACT Aim To investigate the influence of different staining beverages on color stability, surface roughness and microhardness of silorane and methacrylate-based composite resins. Materials and methods Three different composite resins (Filtek Silorane, Filtek P60, Filtek Supreme XT) were tested. Thirty cylindrical specimens (10 × 2 mm) per material were prepared and polished with a series of aluminum-oxide polishing disks. Each group was then randomly subdivided into three groups according to the test beverages: distilled water (control), cola and coffee. The samples were immersed into different beverages for 15 days. Color, surface roughness and microhardness values were measured by a spectrophotometer, prophylometer and Vickers hardness device respectively, at baseline and after 15 days. The data were subjected to statistical analysis. Results Immersion in coffee resulted in a significant discoloration for all the composites tested, although the color change was lower in Filtek Silorane than that of MBCs (p < 0.05). All the composites tested showed similar surface roughness changes after immersion in different beverages (p > 0.05). Besides coffee caused more roughness change than others. Immersion in coffee caused highest microhardness change in Filtek Supreme XT (p < 0.05). Conclusion Cola and coffee altered, to some degree, the color, surface roughness and/or microhardness of the tested resin composites, depending on the characteristics of the materials. How to cite this article Karaman E, Tuncer D, Firat E, Ozdemir OS, Karahan S. Influence of Different Staining Beverages on Color Stability, Surface Roughness and Microhardness of Silorane and Methacrylate-based Composite Resins. J Contemp Dent Pract 2014;15(3):319-325.

Color Stability Behavior of Methacrylate-based Resin Composites Polymerized with Light-emitting Diodes and Quartz-Tungsten-Halogen

2015 ◽  
Vol 40 (3) ◽  
pp. 271-281 ◽  
Author(s):  
C Sabatini
Keyword(s):  
Light Emitting Diodes ◽  
Color Change ◽  
Resin Composite ◽  
Filler Particle ◽  
Color Stability ◽  
Resin Composites ◽  
Light Emitting ◽  
Color Changes ◽  
Quartz Tungsten Halogen ◽  
Before And After

SUMMARY Despite significant developments in improving the optical properties of resin composite materials, their color stability remains a challenge. This study aimed to evaluate the shade stability of light-polymerized, methacrylate-based resin composites with different filler particle composition (microfill, minifill, nanohybrids, and microhybrids) polymerized with quartz-tungsten-halogen (QTH) and light-emitting diodes (LED). Methods and Materials Composite discs were fabricated from Tetric EvoCeram, Premise, Artiste, and Beautifil II (nanohybrids); Filtek Supreme Plus and Vit-l-escence (microhybrids); Heliomolar (microfill); and Estelite Sigma Quick (minifill) using a Teflon mold. The specimens were irradiated either with QTH (Elipar 2500; 600 mW/cm2) for 40 seconds or with LED (Bluephase G2; 1200 mW/cm2) for 20 seconds. Color parameters were measured with a colorimeter before and after polymerization and at 24 hours, one week, one month, and three months. Color change was calculated among the different storage periods. Results There was a significant effect of the composite, time, and their interaction (p&lt;0.001) but no effect of the polymerization unit on the color stability. Color changes immediately after polymerization and at 24 hours (4.22 and 3.88 for LED; and 4.08 and 3.82 for QTH) were not significantly different from each other but were both significantly higher than changes after one week (0.96 and 0.78), one month (1.12 and 1.02), and three months (1.27 and 1.11) for LED and QTH, respectively (p&lt;0.001). Conclusions Color changes were observed for all the materials that were dependent on the type of composite but not on the polymerization unit. These color shifts took place primarily immediately after polymerization and after 24 hours and were additive in nature.

scholarly journals Color stability and surface roughness of resin based direct and indirect restorative materials

2021 ◽  
Author(s):  
Bilge ERSÖZ ◽  
Serpil Karaoğlanoğlu ◽  
Elif Aybala Oktay ◽  
Numan Aydın
Keyword(s):  
Surface Roughness ◽  
Computer Aided Design ◽  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Initial Surface ◽  
Resin Composites ◽  
Significant Difference ◽  
Computer Aided ◽  
Cad Cam

Purpose: This study investigated discoloration and surface roughness (Ra) of resin-based computer aided design (CAD)/computer aided manufacturing (CAM) blocks and direct and indirect resin composites after staining with coffee. Materials & Methods: Using a Teflon mold, 60 disc shaped specimens (8×2 mm2) were fabricated from direct (Estelite Asteria and GrandioSO) and indirect (Gradia Plus) resin composites, and 30 resin CAD/CAM specimens (12×14×2 mm3) were prepared from resin composite CAD/CAM blocks (Vita Enamic, Brilliant Crios, and Cerasmart) (n=10). A contact type profilometer was used to determine the Ra of all 60 polished samples. All specimens were thermocycled between 5 and 55°C for 3000 cycles, and immersed in coffee solution (37°C) for 1 and 7 days. A spectrophotometer was used to determine the color change (∆E00) with the CIEDE2000 formula after the specimens were re-polished. One-way analysis of variance (ANOVA) and Tukey multiple comparison test was performed to analyze the data (p<0.05). Results: The lowest degree of discoloration among the materials tested was found in Vita Enamic resin CAD/CAM block (p<0.001), whereas the highest degree of discoloration was found in the Gradia Plus indirect composite (p<0.001). There was no significant difference was seen between the initial surface roughness values (Ra) among the groups (p=0.249). No significant improvement was observed in the color of the groups except for the Cerasmart resin block after after polishing. Conclusion: Direct resin composites have a higher discoloration potential over resin-based CAD/CAM blocks, whereas they are less prone to discoloration than indirect resin composites

scholarly journals Effect of an Optical Whitening Toothpaste on Color Stability of Tooth-Colored Restorative Materials

2020 ◽  
Vol 14 (01) ◽  
pp. 085-091
Author(s):  
Sedighe Sadat Hashemikamangar ◽  
Farnoosh Hoseinpour ◽  
Nazanin Kiomarsi ◽  
Mehrzad Gholampour Dehaki ◽  
Mohammad Javad Kharazifard
Keyword(s):  
Statistical Analysis ◽  
Color Change ◽  
Color Stability ◽  
Composite Resins ◽  
Time Points ◽  
Color Changes ◽  
Honestly Significant Difference ◽  
Significant Difference ◽  
Resin Modified Glass Ionomer ◽  
Composite Samples

Abstract Objectives This study aimed to assess the effect of an optical whitening toothpaste on color stability of microhybrid, nanofilled, and microfilled composite resins and resin-modified glass ionomer (RMGI) cement in comparison of two other toothpastes. Materials and Methods In this experimental study, disc-shaped composite samples were fabricated. The samples were then polished using silicon carbide papers. Twenty-seven samples of each material were fabricated and subjected to colorimetry using a spectrophotometer. Each group of material was then divided into three subgroups for the application of conventional whitening and whitening containing blue covarine toothpastes. One operator brushed the samples with an electric soft toothbrush with circular motion twice a day, each time for 30 seconds. Colorimetry was performed at 0, 1, 7, 30, and 90 days. Statistical Analysis Two-way analysis of variance (ANOVA), one-way ANOVA, and Tukey’s honestly significant difference (HSD) test were used for statistical analysis. Results The interaction effect of type of restorative material and time on ∆E was not significant at baseline or 1 day (p > 0.05). The effect of type of toothpaste on ∆E was not significant at baseline or 1 day (p = 0.78) but the effect of type of material was significant (p < 0.05). The toothpastes had significantly different effects on ∆E of Z250 at all time points (p < 0.05) except for ∆E0–30 (p = 0.106). The toothpastes had significantly different effects on ∆E of Z350 and Gradia at all time points (p < 0.05). The same was true for RMGI except for ∆E0–7 (p = 0.43) and ∆E0–90 (p = 0.52). The majority of color changes caused by toothpastes were not clinically perceivable (∆E < 3.3), except for ∆E0–90 by the whitening toothpaste (∆E = 9), ∆E0–90 by the conventional toothpaste for Z350 (∆E = 3.9), and ∆E0–1 by the whitening toothpaste for RMGI (∆E = 3.7). Conclusion The color change of all composite samples was not clinically perceivable (<3.3) at all time points, which shows that the tested toothpastes do not cause a significant change in color of composite materials.

scholarly journals Color Stability and Gloss of Esthetic Restorative Materials after Chemical Challenges

2019 ◽  
Vol 30 (1) ◽  
pp. 52-57 ◽  
Author(s):  
Eduardo Haruki Ozera ◽  
Fernanda Miori Pascon ◽  
Américo Bortolazzo Correr ◽  
Regina Maria Puppin-Rontani ◽  
Aline Rogéria de Castilho ◽  
...  
Keyword(s):  
Color Change ◽  
Artificial Saliva ◽  
Color Stability ◽  
Initial Surface ◽  
Resin Composites ◽  
Cranberry Juice ◽  
Color Changes ◽  
Restorative Materials ◽  
Post Hoc ◽  
Acidic Beverages

Abstract This study evaluated gloss and color changes of esthetic restorative materials subjected to different acidic beverages. Specimens of resin composites (Z350XT (Z350), IPS Empress Direct (ED), Charisma Diamond (CD)) were prepared and the initial surface gloss and color (ΔE) were measured (n=10). Then, the specimens were immersed in 4 mL of each of the different beverages (cranberry juice; Coca-Cola; coffee or artificial saliva) during 15 min, 3x/day for 14 days and new gloss and color readings were obtained. Color change was evaluated with the ΔE formula and gloss change values were obtained by the formula: (final gloss - initial gloss). Data was submitted to two-way ANOVA followed by Tukey’s post hoc test (a=0.05). CD showed the lowest color change among resin composites. The highest ΔE values were obtained after immersion in coffee and cranberry juice. Coffee promoted the highest gloss change (worst gloss retention), followed by cranberry juice, Coca-cola and artificial saliva (p<0.05). The type of beverage significantly influenced the gloss of resin composites. Coca-cola reduced gloss of the three resin composites in a similar manner. Coffee affected the ED gloss more than that of Z350 and CD, while cranberry juice affected Z350 more than ED and CD. Saliva had a more pronounced effect on the gloss retention of CD than ED. The beverages used in this study influenced the optical surface properties of the composites studied.

scholarly journals The effect of a bleaching agent on the pigment removal and the bond strength of bulk-fill resin composites: an in vitro study

2018 ◽  
Vol 47 (5) ◽  
pp. 298-304
Author(s):  
Caroline de Farias CHARAMBA ◽  
Renally Bezerra Wanderley LIMA ◽  
Sônia Saeger MEIRELES ◽  
Rosângela Marques DUARTE ◽  
Ana Karina Maciel ANDRADE
Keyword(s):  
Bond Strength ◽  
Color Change ◽  
Resin Composite ◽  
Distilled Water ◽  
Filling Material ◽  
Resin Composites ◽  
Bleaching Agent ◽  
Microtensile Testing ◽  
Before And After

Abstract Introduction In order to simplify the technique, reduce the time required for direct adhesive restorations, bulk-fill resin composites have been developed be applied in bulk placement up to 4 mm increments. Objective Evaluating the color change (ΔE) and the microtensile bond strength (μTBS) of bulk fill resin composites (BFRC) to dentin after the immersion in regular beverages and the application of bleaching systems. Method Forty-five human molar teeth were randomly distributed in three groups according to the filling material (n=15): Filtek Bulk Fill, Tetric N Ceram Bulk Fill and Filtek Z100. The restored teeth were immersed in coffee, wine and distilled water (n=5) for 72 hours. The color parameters were measured using a spectrophotometer, having as basis the CIE L*a*b*, before and after tooth staining and application of bleaching processes. Subsequently, the teeth were sectioned to obtain the specimens for the microtensile testing. The ΔE values were analyzed applying the Kruskal-Wallis and the Wilcoxon tests, and the μTBS values were analyzed applying the ANOVA and the Bonferroni tests (p<0.05). Result There were no significant differences in the ∆E values when comparing the BFRCs to the conventional resin composite (CRC) in most of the experimental groups. The ∆E values did not present significant differences before and after the application of bleaching processes for all the tested resin composites. The BFRCs presented higher μTBS values than the CRC after exposure to distilled water, wine and bleaching agent. Conclusion The studied BFRCs presented similar color stability to the CRC. The BFRCs presented higher bond strength to the dentin than the CTC in most of the evaluated conditions. The bleaching agent was not effective in whitening the stained restored teeth.

scholarly journals Color stability evaluation of micro hybrid composite resins submitted to accelerated artificial aging

2015 ◽  
Vol 21 (4) ◽  
pp. 227
Author(s):  
Gisseli Bertozzi Ávila ◽  
Sergio Candido Dias ◽  
Mariana Lima da Costa Valente ◽  
José Augusto Marcondes Agnelli ◽  
Andréa Candido dos Reis
Keyword(s):  
Hybrid Composite ◽  
Artificial Aging ◽  
Color Change ◽  
Dental Materials ◽  
Color Stability ◽  
Composite Resins ◽  
Color Analysis ◽  
Oral Rehabilitation ◽  
Surface Degradation ◽  
O 15

Objective: The aesthetics of dental materials is extremely important for the success of oral rehabilitation. Thus, in the present study we evaluated the color stability and the surface degradation of three micro hybrid composite resins after accelerated artificial aging process (AAA). Methods: Were prepared 24 specimens (n=8) for each material: Solidex, Artglass and Cesead, dimensions of Ø 15 mm by 2 mm in thickness. The samples were subjected to color analysis, before and after AAA, in a spectrophotometer according to the CIE L*a*b* parameters, and a sample of each material, was selected for morphological evaluation under scanning electron microscopy (SEM). The data were submitted to one-way ANOVA and Tukey test (α=0.05). Results: Artglass showed higher stability regarding the presence of red and yellow (p<0.05) when subjected to the AAA and fewer of these pigments (p<0.05) when compared to the Cesead and Solidex, which showed the highest luminance stability (p<0.05). ΔE Cesead was the most unstable (p<0.05). All resins analyzed by SEM showed superficial degradation when submitted to the AAA, mainly in resin Cesead. Conclusion: All materials analyzed demonstrate color change and surface degradation, Cesead resin showed the worse results.

Sign in / Sign up

Export Citation Format

Share Document