scholarly journals Color Stability of Restorative Materials in Response to Arabic Coffee, Turkish Coffee and Nescafe

2013 ◽  
Vol 14 (4) ◽  
pp. 681-690 ◽  
Author(s):  
Khalid H Al-Samadani
Keyword(s):  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Color Difference ◽  
Composite Resins ◽  
Color Measurement ◽  
Water Control ◽  
Mean Values ◽  
Significance Level ◽  
Restorative Materials

ABSTRACT Objective To evaluate the effect of Arabic coffee, Turkish coffee and Nescafe on the color stability of four different composite resins after a period of aging time 1, 7 and 30 days. Materials and methods Twenty specimens from each type of tested composite resin material were prepared. Five specimens from each tested material (Z350 XT, Artist, GC and Z250) was evaluated after storage in Arabic coffee, Turkish coffee, Nescafe and distil water (control) at 37°C in a dark container for 1, 7 and 30 days. Color measurement was done using colorimeter based on the CIE L* a* b* color scale. Color differences ΔE*ab, Δb* and Δa* among specimens immersed in distil water and staining coffee beverages were evaluated overtime. Mean values were statistically analyzed with one-way analysis of variance (ANOVA), followed by Tukey test with p < 0.05 as significance level. Results All tested composite resins showed increase color change after a period of 1, 7 and 30 days. The color change ΔE*ab, Δb* and Δa* exhibited by Arabic coffee, in Turkish coffee and Nescafe except Δa*. The highest total color difference ΔE*ab after 30 days was in group A Arabic coffee (ΔE > 1.5 perceivable) and not perceivable in group B Turkish coffee and group C Nescafe. For Δb* all materials discolored toward yellowness after 30 days except Arabic coffee group which shifted from yellowness toward blueness (Δb*> 1.5 perceivable). Conclusion The effect of staining beverages on the resin composite materials increases with time of aging toward yellowness and not perceivable in all groups except with Arabic coffee which had highest effect after 30 days and the discoloration shifted from yellowness to blueness perceivable. How to cite this article Al-Samadani KH. Color Stability of Restorative Materials in Response to Arabic Coffee, Turkish Coffee and Nescafe. J Contemp Dent Pract 2013;14(4):681-690.

scholarly journals In Vitro Evaluation of Physical and Mechanical Properties of Light-Curing Resin Cement: A Comparative Study

2020 ◽  
Vol 14 (01) ◽  
pp. 152-156
Author(s):  
Luís Felipe Espíndola-Castro ◽  
Oscar Felipe Fonseca de Brito ◽  
Larissa Gabrielle Assis Araújo ◽  
Izabella Luiza Aragão Santos ◽  
Gabriela Queiroz De Melo Monteiro
Keyword(s):  
Color Change ◽  
Surface Hardness ◽  
Color Stability ◽  
Resin Cement ◽  
The Other ◽  
Distilled Water ◽  
Water Control ◽  
Mean Values ◽  
Significance Level

Abstract Objective The aim of study was to evaluate in vitro the surface hardness, sorption, solubility, and color stability of three light-cured resin cements, namely RelyX Veneer (RLX), Variolink Veneer (VLK), and All Cem Veneer (ACV). Materials and Methods Cylindrical samples (15 × 1 mm) were made for each group using a metallic mold (n = 10). Vickers microhardness test was performed, and average hardness was calculated from three indentations (300 gf/15s) per sample. The sorption and solubility of the materials were evaluated according to ISO 4049:2009 based on three samples weighing: initial (m 1), after immersion in distilled water for 7 days (m 2), and final (after removal of all moisture [m 3]). The color change was observed using a digital spectrophotometer, at three different time points, baseline, 1 day, and 1 week of immersion in coffee and distilled water (control). Statistical Analysis Shapiro–Wilk test was used to analyze the normality of the data, and groups were compared using Kruskal–Wallis and Mann–Whitney tests. A significance level of 5% was used. Results RLX showed the highest microhardness mean values (36.96 VHN), but higher sorption (23.2 µg/mm3) and solubility (2.40 µg/mm3), with statistically significant differences with the other groups. For color stability, higher ∆E was observed for the samples immersed in coffee (p = 0.009). The VLK resin cement presented statistically significant differences from the other groups, with higher color changes in coffee at 1 day (15.14) and after 1 week (23.65). Conclusion RLX resin cement showed better hardness results. All materials tested performed satisfactorily for sorption and solubility according to ISO 4049:2009. All materials showed high-staining values after 1 week of immersion in coffee.

scholarly journals The Effects of Mouthwashes on the Color Stability of Resin-Based Restorative Materials

2020 ◽  
pp. 346-357
Author(s):  
Ayşe Tuğba Ertürk-Avunduk ◽  
Seçkin Aksu ◽  
Ebru Delikan
Keyword(s):  
Analysis Of Variance ◽  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Multiple Comparison ◽  
Color Measurement ◽  
Distilled Water ◽  
Significant Difference ◽  
Restorative Materials ◽  
Post Hoc

Objective: This study investigated the effects of three types of mouthwash on the color stability of three resin-based restorative materials (nanohybrid resin composite, sonic-activated bulk-fill material, and compomer). Materials and Methods: To this end, 120 cylindrical disc specimens were prepared and polished, after which they were incubated in distilled water for 24 hours for post-polymerization. The baseline color values of each specimen were measured with a spectrophotometer, then the specimens were randomly divided into four groups. Following immersion in the mouthwashes for 24 hours, the specimens were rinsed with distilled water and dried before the color measurement was repeated. The values of color change (∆E₀₀) were subsequently calculated. A two-way analysis of variance and Duncan’s post hoc multiple comparison tests were conducted to determine statistically significant differences among the restorative materials. Results: All samples showed discoloration after immersion, albeit some instances of discoloration were imperceptible. In this respect, a statistically significant difference was found among the restorative materials and mouthwashes (p<0.05). Imperceptible ∆E₀₀ values were derived on the nanohybrid resin composite and compomer, but perceptible and acceptable ∆E₀₀ values were detected on the sonic-activated bulk-fill materials (p<0.05). The clinically unacceptable discoloration was observed on the sonic-activated bulk-fill composite immersed in Listerine®. Conclusions: Clinicians should make recommendations based on the potential staining capacity of mouthwashes prescribed for daily use in restorative materials. In this way, the need for renewal of restorations due to discoloration could be avoided.

scholarly journals Effect of Energy Drinks on the Color Stability of Nanofilled Composite Resin

2013 ◽  
Vol 14 (4) ◽  
pp. 704-711 ◽  
Author(s):  
Ayman Al-Dharrab
Keyword(s):  
Aging Time ◽  
Composite Resin ◽  
Color Change ◽  
Storage Period ◽  
Color Stability ◽  
Energy Drinks ◽  
Composite Resins ◽  
Mean Values ◽  
Significance Level ◽  
Red Bull

ABSTRACT Objective To study the effect of three energy drinks on the color stability of nanofilled composite resins after different periods of aging time. Materials and methods Composite resin disks, 6 mm diameter, 3 mm thickness were prepared from Filtec Z350 XT, Tetric EvoCeram, and Filtec Z250 XT. Specimens from each material were tested after aging with Red Bull, Bison and Power Horse energy drinks and distilled water as a control. Specimens were stored at 37°C in dark containers for 1, 7, 30 and 60 days. Color was assessed in the CIELAB using a colorimeter before and after each storage period. Color differences ΔE*ab and Δb* among specimens were measured. Mean values were statistically analyzed using one-way analysis of variance (ANOVA), with p < 0.05 as significance level. Results The color change ΔE*ab and Δb* occurred by Red Bull, Bison and Power Horse energy drinks was significantly different for all tested materials at all four times p < 0.05 except in the Red Bull group. All specimens showed increase in color changes toward yellowness Δb* after a period of 1, 7, 30 and 60 days. The highest total color difference ΔE*ab was found in the Red Bull group after 60 days. Conclusion Energy drinks used in this study had staining effect on the tested composite resin materials. The discoloration increased with aging time toward yellowness; however, it was not perceptible in all test groups after 60 days. How to cite this article Al-Dharrab A. Effect of Energy Drinks on the Color Stability of Nanofilled Composite Resin. J Contemp Dent Pract 2013;14(4):704-711.

scholarly journals Effects of Mouth Rinses on Color Stability of Resin Composites

2008 ◽  
Vol 02 (04) ◽  
pp. 247-253 ◽  
Author(s):  
Cigdem Celik ◽  
Bulem Yuzugullu ◽  
Selim Erkut ◽  
Kıvanc Yamanel
Keyword(s):  
Color Change ◽  
Calculated Data ◽  
Color Stability ◽  
Color Difference ◽  
Distilled Water ◽  
Significance Level ◽  
Color Changes ◽  
Mouth Rinses ◽  
Significant Difference ◽  
Restorative Materials

ABSTRACTObjectives: The aim of this study was to evaluate the effects of 3 commercially available mouth rinses on the color stability of 4 different resin-based composite restorative materials.Methods: Forty disc-shaped specimens (10x2 mm) were prepared from each of the following materials: A nanofill composite Filtek Supreme XT (3M/Espe, St. Paul, MN, USA); a packable lowshrinkage composite, AeliteLS Packable (BISCO, Inc, Shaumburg, IL, USA); nanoceramic compositeresin Ceram-X (Dentsply, Konstanz, Germany); a microhybrid composite, and Aelite All-Purpose Body (BISCO). The specimens were then incubated in distilled water at 37°C for 24 hours. The baseline color values (L*, a*, b*) of each specimen were measured with a colorimeter according to the CIELAB color scale. After baseline color measurements, 10 randomly selected specimens from each group were immersed in 1 of the 3 mouth rinses and distilled water as control. The specimens were stored in 20 mL of each mouth rinse (Oral B Alcohol-free, Listerine Tooth Defense Anti-cavity Fluoride Rinse and Klorhex) for 12 hours. After immersion, the color values of all specimens were remeasured, and the color change value ΔE*ab was calculated. Data were analyzed using a 2-way analysis of variance at a significance level of .05.Results: All specimens displayed color changes after immersion, and there was a statistically significant difference among restorative materials and mouth rinses (P<.05); however, the change was not visually perceptible (ΔE*ab<3.3). The interaction between the effect of mouth rinses and type of restorative materials was not statistically significant (P>.05).Conclusions: It may be concluded that although visually nonperceptible, all resin restorative materials tested showed a color difference after immersion in different mouth rinses. (Eur J Dent 2008;2:247-253)

scholarly journals Effect of Different Polishing Systems and Drinks on the Color Stability of Resin Composite

2013 ◽  
Vol 14 (4) ◽  
pp. 662-667 ◽  
Author(s):  
Sevil Gurgan ◽  
Asll Berber ◽  
Filiz Yalcin Cakir ◽  
Meserret Baseren
Keyword(s):  
Color Change ◽  
Resin Composite ◽  
Sour Cherry ◽  
Color Stability ◽  
Color Difference ◽  
Mean Values ◽  
Color Changes ◽  
Storage Solutions ◽  
Before And After ◽  
Cherry Juice

ABSTRACT Aim The purpose of this study was to evaluate the color stability of resin composit using different finishing systems and drinks. Materials and methods Composit disks (5 mm diameter, 2 mm thickness) were prepared for each nanofilled composite using a brass mold. The specimens were divided into 5 finishing system groups Mylar strip (Mylar, DuPont, Wilmington, Del., USA), Soft Lex (3M™ ESPE™ St. Paul, MN, USA), Enhance (Dentsply-DeTrey GmbHD Konstanz, Germany), Hiluster (KerrHawe, Bioggio, Switzerland), Opti Disc (KerrHawe, Bioggio, Switzerland) and each group was divided into 10 subgroups (n = 10) and stored for 24 hours at 37°C in different drinks water coffee, coffee with sugar, tea, tea with sugar, diet coke, coke, light sour cherry juice or sour cherry juice. Color of all specimens was measured before and after exposure with a spectrophotometer using CIE L*a*b* relative, and color changes (ΔE*) were then calculated. The data were analyzed with a twoway analysis of variance (ANOVA), and mean values were compared by the Tukey HSD test (p = 0.05). Results For the drinks, the lowest ΔE* values were observed in the water and highest ΔE* values were observed in sour cherry juice. When drinks with and without sugar were compared, all groups with sugar demonstrated a higher color difference than without sugar. For the different finishing systems, Mylar strip group demonstrated signicantly highest color change; Enhance groups demonstrated signicantly lowest color change. Conclusion Finishing treatments and storage solutions significantly affect the color stability of resin composite. The presence of sugar in drinks increased the color difference compared to drinks without composit. Clinical significance Polishing techniques and drinking drinks with sugar may affect the color of esthetic restorations. How to cite this article Berber A, Cakir FY, Baseren M, Gurgan S. Effect of Different Polishing Systems and Drinks on the Color Stability of Resin Composite. J Contemp Dent Pract 2013; 14(4):662-667.

scholarly journals Effect of colorant solutions on the color stability of provisional prosthetic materials

2018 ◽  
Vol 17 ◽  
pp. 1-8
Author(s):  
Ítalo Alisson da Fonsêca Costa ◽  
Emilena Maria Castor Xisto Lima
Keyword(s):  
Color Change ◽  
Soft Drink ◽  
Color Stability ◽  
Color Difference ◽  
Control Group ◽  
Water Control ◽  
Significance Level ◽  
Color Changes ◽  
Prosthetic Materials ◽  
Acrylic Resins

Aim: To evaluate the color stability of acrylic and bis-acrylic resins after immersion in 3 staining solutions. Methods: Forty-eight samples (10 x 2 mm) of each provisional restorative material (Duralay, Dencrilay, Structur 2 and Protemp 4) were fabricated and distributed into four groups (n = 12): G1 – distilled water (control group); G2 – a cola flavored soft drink; G3 – wine and G4 – coffee. The specimens were immersed for seven days at 37°C in the solutions, which were changed every 24 hours. The color of all specimens was measured with a spectrophotometer (VITA Easyshade Advance) before (T0) and after immersion (T1), and the color changes (ΔE) were calculated. Nonparametric Kruskal-Wallis tests were used, followed by Dunn’s test with a significance level of 5%. Results: For the acrylic resins (Duralay and Dencrilay), the largest color change values were obtained in group G4 – coffee, whereas in the bis-acrylic resins (Protemp 4 and Structur 2), the largest color difference was observed in groups G3 – wine and G4 – coffee. The acrylic resins showed statistically significantly less color change than the bis-acrylic resins. Conclusions: The coffee and the wine promoted larger color changes in the provisional prosthetic materials tested in this study. The acrylic resins showed more color stability than the bis-acrylic resins.

scholarly journals Color stability of composites subjected to accelerated aging after curing using either a halogen or a light emitting diode source

2007 ◽  
Vol 18 (2) ◽  
pp. 119-123 ◽  
Author(s):  
Fernanda de Carvalho Panzeri Pires-de-Souza ◽  
Lucas da Fonseca Roberti Garcia ◽  
Hisham Mohamad Hamida ◽  
Luciana Assirati Casemiro
Keyword(s):  
Color Change ◽  
Light Emitting Diode ◽  
Accelerated Aging ◽  
Color Stability ◽  
Composite Resins ◽  
Significance Level ◽  
Light Emitting ◽  
Before And After ◽  
Qth Light

The purpose of this study was to evaluate, in vitro, the color stability of three composite resins of two different shades (A3 and C3) cured with either a quartz tungsten halogen (QTH) or a light emitting diode (LED) source. Forty specimens (20 x 2 mm) were prepared for each composite (Tetric Ceram®, Heliomolar® and Esthet-X®), being 20 for each shade. In each group, 10 specimens were light-cured using the QTH unit and 10 with the LED source. The shade of the materials was evaluated before and after submitting the specimens to artificial accelerated aging (4 h UV-B/4 h condensing vapor), using a reflection spectrophotometer. deltaE means were calculated and analyzed statistically by 2-way ANOVA and Tukey's test at 5% significance level. Both A3 and C3 shades of Esthet-X composite resin showed the lowest color change when cured with the QTH light, while Tetric C3 cured with the QTH light showed the highest color change.

scholarly journals Influence of electronic nicotine delivery systems (ENDS) in comparison to conventional cigarette on color stability of dental restorative materials

2020 ◽  
Vol 36 (5) ◽  
Author(s):  
Fahim Vohra ◽  
Abdulelah Andejani ◽  
Osamah Alamri ◽  
Abdulaziz Alshehri ◽  
Rana S Al-Hamdan ◽  
...  
Keyword(s):  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Delivery Systems ◽  
Electronic Nicotine Delivery Systems ◽  
Ceramic Samples ◽  
Dental Restorative Materials ◽  
Nicotine Delivery ◽  
Restorative Materials ◽  
Dental Restorative

Objective: The use of Electronic Nicotine Delivery Systems (ENDS) is increasing rapidly. However, its discoloring effect on dental restorations is not known. This study aimed to evaluate the effect of ENDS aerosol when compared to conventional cigarette smoke (CS) on the color stability of dental ceramic (DC) and resin composite (RC). Methods: This research project was conducted from November 2018 to May 2019. In this study 30 discs each for DC and RC materials were fabricated to be equally divided into groups of exposure to CS, ENDS aerosol and storage in distilled water (No smoke; NS) respectively (n=10). Specimens were exposed for a total of 7 days, with a rate of 10 cycles per day, each cycle represented 10 puffs. The color change was assessed using the CIELAB color space, by calculating ΔE. Data was analysed using ANOVA and multiple comparisons test. Results: Ceramic specimens in CS (2.422 ± 0.771) and ENDS (2.396 ± 0.396) groups showed comparable ΔE (color change) (p=0.992). Similarly, composite specimens in CS (42.871 ± 2.442) and ENDS (46.866 ± 3.64) groups showed comparable ΔE (p>0.05). NS specimens in both composite and ceramic samples showed lower ΔE than CS and ENDS specimens respectively. Conclusions: Aerosol from Electronic nicotine delivery systems (ENDS) showed similar discoloration levels as cigarette smoking (CS). The level of discoloration for ceramic samples for both ENDS and CS was below clinically perceptible levels (Mean ΔE < 2.5). Discoloration of composite resin due to CS and ENDS was visually perceptible (Mean ΔE > 4.0). doi: https://doi.org/10.12669/pjms.36.5.2303 How to cite this:Vohra F, Andejani AF, Alamri O, Alshehri A, Al-Hamdan RS, Almohareb T, et al. Influence of electronic nicotine delivery systems (ENDS) in comparison to conventional cigarette on color stability of dental restorative materials. Pak J Med Sci. 2020;36(5):---------.  doi: https://doi.org/10.12669/pjms.36.5.2303 This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

scholarly journals Effect of a Prebrushing Mouthwash on Color Stability of Composite Resins

2021 ◽  
Vol 22 (3) ◽  
pp. 191-194
Author(s):  
Ângela Dalla Nora ◽  
Camila da Silva Rodrigues ◽  
Rachel de Oliveira Rocha
Keyword(s):  
Composite Resin ◽  
Color Change ◽  
Test Group ◽  
Color Stability ◽  
Composite Resins ◽  
Control Group ◽  
Water Control ◽  
Dental Tissues ◽  
Evaluation Time ◽  
Materials Used

AbstractDespite composite resins capacity to mimic dental tissues, they can discolor over time. However, there is no information on the effect of prebrushing mouthwashes on the composite resin staining. This study aimed to evaluate the effect of prebrushing mouthwashes on the color stability of three composite resins. Twenty specimens of each resin were prepared: Filtek Z250 (3M ESPE –S Paul, MN, USA), Charisma (Heraeus Kulzer GmbH - Hanau - Germany) e EvoluX (Dentsply- Petrópolis - Brazil). Groups were randomly divided accord to the treatment: immersion in prebrushing mouthwash (test group) or immersion in deionized water (control group). Test groups were immersed in 10 ml of prebrushing mouthwash Plax Magic (Colgate-Palmolive, São Bernardo do Campo, SP, Brazil) for 60 s three times a day during 35 days following the manufacturer’s instructions. Color measurements were performed after 24 h of specimen’s preparation and after 7, 14, 21, and 35 days of immersion time. Results showed that prebrushing mouthwash Plax Magic promoted a color change in all the tested materials and evaluation time. The color change was greater in composite resin Charisma, followed by Z250 and EvoluX. Therefore, prebrushing mouthwash promoted a color change in all the materials used. Composite resin Charisma demonstrated less color stability than Filtek Z250 resin and EvoluX resin, which was the most stable.Keywords: Composite Resins. Oral Hygiene. Color.ResumoApesar da capacidade das resinas compostas de mimetizar os tecidos dentais, esses materiais podem ter sua cor alterada com o tempo. No entanto, não há informação na literatura sobre o efeito de evidenciadores de placa na estabilidade de cor desses materiais. Este estudo teve por objetivo avaliar o efeito de um evidenciador de placa na estabilidade de cor e três resinas compostas. Para isso, 20 espécimes de cada resina foram preparados: Filtek Z250 (3M ESPE –S Paul, MN, EUA), Charisma (Heraeus Kulzer GmbH - Hanau - Alemanha) e EvoluX (Dentsply- Petrópolis - Brasil). Os grupos foram aleatoriamente divididos de acordo com o tratamento a ser submetido: imersão no evidenciador de placa (grupo teste) ou imersão em água deionizada (grupo controle). Os grupos teste foram imersos em 10 ml do evidenciador de placa Plax Magic (Colgate-Palmolive, São Bernardo do Campo, SP, Brasil) por 60 s três vezes por dia durante 35 dias, de acordo com a orientações de uso do fabricante. As leituras de cor foram feitas após 24 h da preparação dos espécimes e após 7, 14, 21 e 35 dias de imersão. Os resultados mostraram que o evidenciador de placa Plax Magic promoveu alteração de cor em todos os materiais usados e em todos os tempos de leitura. A alteração de cor foi maior na resina Charisma, seguida da Z250 e EvoluX. Portanto, o evidenciador de placa promove alteração de cor em todos os materiais testados. A resina composta Charisma demonstrou menor estabilidade de cor que as resinas Z250 e EvoluX, que, por sua vez, foi a mais estável. Palavras-chave: Resinas Compostas. Higiene Oral. Cor.

scholarly journals Color Stability of Composites After Short-term Oral Simulation: An in vitro Study

2016 ◽  
Vol 10 (1) ◽  
pp. 431-437 ◽  
Author(s):  
Didem Öner Özdaş ◽  
Mağrur Kazak ◽  
Aylin Çilingir ◽  
Meryem Gülce Subaşı ◽  
Murat Tiryaki ◽  
...  
Keyword(s):  
Repeated Measures ◽  
Color Change ◽  
In Vitro Study ◽  
Color Stability ◽  
Black Tea ◽  
Composite Resins ◽  
Pomegranate Juice ◽  
Restorative Materials ◽  
Color Alteration

Background:Although most of the studies investigated color stability of different restorative materials, evaluation of color stability of composites after immersion in multiple beverages in the same day by anin vitrooral simulation study is unclear.Objective:To assess color change of different restorative materials at the end of days 1, 14, and 30 of immersion in multiple liquid types to mimic the oral environmentin vitro.Method:Ten disc-shaped specimens were made from each of four different resin composites (Filtek Z250, Voco x-tra base, Beautifil Flow Plus, Beautifil II). Baseline color value of each sample was measured using a spectrophotometer. Each composite was respectively immersed in coffee, an orange/pomegranate juice mixture, black tea, and a mouth rinse on the same day to mimic daily liquid consumption of individuals. Color measurements were taken after 1, 14, and 30 days by spectrophotometer and color change values were calculated. Statistical analyses were executed by one-way ANOVA/Tukey HSD and repeated-measures ANOVA.Results:All materials showed significant color change after 1, 14, and 30 days (P< 0.01) of immersion in liquids, with the lowest color alteration observed at the 1stday and the highest observed after the 30thday. Among the materials tested, at each time point (1, 14, and 30 days), the lowest color alteration was detected in Filtek Z250 and the highest color alteration was detected in Beautifil II.Conclusion:Color alteration of composite resins is affected by composite type and storage time. With the exception of 1 day of storage, color changes of all materials were substantial and clinically unacceptable.

Sign in / Sign up

Export Citation Format

Share Document