scholarly journals Mapping Flood-Based Farming Systems with Bayesian Networks

Land ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 369 ◽  
Author(s):  
Issoufou Liman Harou ◽  
Cory Whitney ◽  
James Kung’u ◽  
Eike Luedeling

Many actors in agricultural research, development, and policy arenas require accurate information on the spatial extents of cropping and farming practices. While remote sensing provides ways for obtaining such information, it is often difficult to distinguish between different types of agricultural practices or identify particular farming systems. Stochastic system behavior or similarity in the spectral signatures of different system components can lead to misclassification. We addressed this challenge by using a probabilistic reasoning engine informed by expert knowledge and remote sensing data to map flood-based farming systems (FBFS) across Kisumu County in Kenya and the Tigray region in Ethiopia. Flood-based farming is an important form of agricultural production employed in regions with seasonal water surplus, which can be harvested and used to irrigate crops. Geographic settings for FBFS vary widely in terms of hydrology, vegetation, and local practices of agronomic flooding. Agronomic success is often difficult to anticipate, because the timing and amount of flooding usually cannot be precisely predicted. We generated a Bayesian network model to describe the FBFS settings of the study regions. We acquired three years (2014–2016) of Moderate Resolution Imaging Spectroradiometer (MODIS) Terra spectral data as eight-day composite time series and elevation data from the Shuttle Radar Topography Mission (SRTM) to compute 10 spatial data metrics corresponding to 10 of the 17 Bayesian network nodes. We used the spatial data metrics in a fully probabilistic framework to generate the 10 spatial data nodes. We then used these as inputs for the probabilistic model to generate prior and posterior spatial estimates for specific metrics along with their spatially explicit uncertainties. We show how such an approach can be used to predict plausible areas for FBFS based on several scenarios. We demonstrate how spatially explicit information can be derived from remote sensing data as fuzzy quantifiers for incorporating uncertainties when mapping complex systems. The approach achieved a remarkably accurate result in both study areas, where 84–90% of various FBFS fields sampled were correctly mapped as having a high chance of being suitable for the practice.

Author(s):  
A. A. Kolesnikov ◽  
P. M. Kikin ◽  
E. A. Panidi ◽  
A. G. Rusina

Abstract. The article describes the possibilities and advantages of using distributed systems in the processing and analysis of remote sensing data. The preparation and processing of various types of remote sensing data (multispectral satellite images, values of climatic indicators, elevation data), which will then be used to build a simulation model of a hydroelectric power plant, was chosen as the basic task for testing the chosen approach. The existing approaches with distributed processing of spatial data of various types (vector cartographic objects, raster data, point clouds, graphs) are analyzed. The description of the developed approach is given and the rationale for the choice of its components is made. The preprocessing operations that were performed on the used raster data are described. An approach to the problems of raster data segmentation based on libraries for distributed machine learning is considered. Comparison of the speed of working with data for various algorithms of machine learning and processing is given.


Author(s):  
Yue Ma ◽  
Guoqing Li ◽  
Xiaochuang Yao ◽  
Jin Ben ◽  
Qianqian Cao ◽  
...  

With the rapid development of earth observation, satellite navigation, mobile communication and other technologies, the order of magnitude of the spatial data we acquire and accumulate is increasing, and higher requirements are put forward for the application and storage of spatial data. Under this circumstance, a new form of spatial data organization emerged-the global discrete grid. This form of data management can be used for the efficient storage and application of large-scale global spatial data, which is a digital multi-resolution the geo-reference model that helps to establish a new model of data association and fusion. It is expected to make up for the shortcomings in the organization, processing and application of current spatial data. There are different types of grid system according to the grid division form, including global discrete grids with equal latitude and longitude, global discrete grids with variable latitude and longitude, and global discrete grids based on regular polyhedrons. However, there is no accuracy evaluation index system for remote sensing images expressed on the global discrete grid to solve this problem. This paper is dedicated to finding a suitable way to express remote sensing data on discrete grids, and establishing a suitable accuracy evaluation system for modeling remote sensing data based on hexagonal grids to evaluate modeling accuracy. The results show that this accuracy evaluation method can evaluate and analyze remote sensing data based on hexagonal grids from multiple levels, and the comprehensive similarity coefficient of the images before and after conversion is greater than 98%, which further proves that the availability hexagonal grid-based remote sensing data of remote sensing images. And among the three sampling methods, the image obtained by the nearest interpolation sampling method has the highest correlation with the original image.


2019 ◽  
Vol 11 (2) ◽  
pp. 168 ◽  
Author(s):  
Jianbin Tao ◽  
Wenbin Wu ◽  
Meng Xu

Global food demand will increase over the next few decades, and sustainable agricultural intensification on current cropland may be a preferred option to meet this demand. Mapping cropping intensity with remote sensing data is of great importance for agricultural production, food security, and agricultural sustainability in the context of global climate change. However, there are some challenges in large-scale cropping intensity mapping. First, existing indicators are too coarse, and fine indicators for measuring cropping intensity are lacking. Second, the regional, intra-class variations detected in time-series remote sensing data across vast areas represent environment-related clusters for each cropping intensity level. However, few existing studies have taken into account the intra-class variations caused by varied crop patterns, crop phenology, and geographical differentiation. In this research, we first presented a new definition, a normalized cropping intensity index (CII), to quantify cropping intensity precisely. We then proposed a Bayesian network model fusing prior knowledge (BNPK) to address the issue of intra-class variations when mapping CII over large areas. This method can fuse regional differentiation factors as prior knowledge into the model to reduce the uncertainty. Experiments on five sample areas covering the main grain-producing areas of mainland China proved the effectiveness of the model. Our research proposes the framework of obtain a CII map with both a finer spatial resolution and a fine temporal resolution at a national scale.


2021 ◽  
Vol 937 (2) ◽  
pp. 022051
Author(s):  
D Krivoguz ◽  
A Semenova ◽  
S Mal’ko

Abstract The main way to understand variability of any spatial data using remote sensing is calculating spectral indices. For now, some difficulties have receiving water surface temperature due to specific properties for satellite sensors and low spatial resolution. The main sources of receiving salinity data are remote sensing data from ESA SMOS, NASA Aquarius and SMAP satellites. Using different machine learning algorithms, we can get models or equations, representing dependency between studied environmental variable and different spectral channels of remote monitoring data. After receiving and collecting remote sensing data in database this system uses machine learning algorithms to find dependency between collected field data and different spectral bands of the remote sensing data. Our goal was to form an analytical system based on remote sensors and machine learning algorithm to analyse, predict and evaluate water ecosystems for fisheries and environmental protection.


2017 ◽  
Author(s):  
Wenang Anurogo ◽  
Wikan Jaya Prihantarto ◽  
Isti Fadhatul K ◽  
Asih Dewi Nugraheni ◽  
Dana Krisna Prabawa ◽  
...  

Bicycles are an environmentally friendly device of transportation. Today many big cities are facilitating bicycle users with a special bicycle lane. Yogyakarta is a place of cultural acculturation. One of the cultures presented is the culture of walking and cycling for the society. One of the famous location of cycling place in Yogyakarta is in Malioboro area. Aside from being the Central Bussines District (CBD) of Yogyakarta, Malioboro area is also an iconic area for travelers to enjoy the atmosphere in it. This research aims to determine Comfort Level Of Bicycle Lane in Malioboro and presents it into a spatial data that can be easily understood. The comfort level of cyclists can be extracted from remote sensing data and field survey data. The level of comfort is extracted into parameters that affect the comfort level of cyclists, especially in the area Malioboro Yogyakarta. The parameters used in this study resulted from high-resolution remote sensing data extraction are shade vegetation, side obstacles, bike lane mark, path position, traffic density, and relief. The results show that there are 8 bike paths with very comfortable class, 16 bicycle lanes with comfortable class, 7 lines with medium grade, 38 bike lines with uncomfortable class and 20 bike lanes with very uncomfortable class


Sign in / Sign up

Export Citation Format

Share Document