scholarly journals Polylactide-Based Stent Coatings: Biodegradable Polymeric Coatings Capable of Maintaining Sustained Release of the Thrombolytic Enzyme Prourokinase

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4107 ◽  
Author(s):  
Alexander S. Baikin ◽  
Alexey G. Kolmakov ◽  
Lyudmila A. Shatova ◽  
Elena O. Nasakina ◽  
Mars G. Sharapov ◽  
...  

The novelty of the study is the development, creation, and investigation of biodegradable polymeric membranes based on polylactide, that are capable of directed release of large molecular weight biomolecules, particularly, prourokinase protein (MW = 46 kDa). Prourokinase is a medication with significant thrombolytic activity. The created membranes possess the required mechanical properties (relative extension value from 2% to 10%, tensile strength from 40 to 85 MPa). The membranes are biodegradable, but in the absence of living cells in a water solution they decompose by less than 10% in half a year. The created membranes are capable of controlled prourokinase release into intercellular space, and the total enzymatic activity of prourokinase does not decrease by more than 12%. The daily release of prourokinase from one square centimeter of the membrane ranges from 1 to 40 μg per day depending on the technique of membrane preparation. The membranes have no acute toxic effect on cells accreting these surfaces de novo. The number of viable cells is at least 96%−97% of the overall cell count. The mitotic index of the cells growing on the surface of the polymeric films comprised around 1.5%. Histological examination did not reveal any disorders in tissues of the animals after the implantation of polymer membranes based on polylactide, both alone and as components of stent cover. Implantation of stents covered with prourokinase-containing polymers led to the formation of a mature connective tissue capsule that is thicker than in the case of uncovered stents. Thus, various polylactide-based biodegradable polymeric membranes possessing the required mechanical properties and capable of prolonged and directed release of prourokinase macromolecules are developed and investigated in the study.

2020 ◽  
Vol 92 (8) ◽  
pp. 1329-1340
Author(s):  
A. G. Kolmakov ◽  
A. S. Baikin ◽  
S. V. Gudkov ◽  
K. N. Belosludtsev ◽  
E. O. Nasakina ◽  
...  

AbstractThe paper describes synthesis and testing of novel biodegradable polylactide-based polymer membranes with desired mechanical properties, which are capable of sustained and directed release of biomacromolecules with high molecular weight (in particular, streptokinase; m.w. 47 kDa). Streptokinase is a pharmaceutical agent, possessing a pronounced thrombolytic activity. The membranes synthesized had a percentage elongation of 2–11% and tensile strength of 25–85 MPa. They were biodegradable – yet being stored in aqueous media in the absence of biological objects, would be dissolved by no more than 10% in 6 months. The synthesized membranes were capable of controlled release of streptokinase into the intercellular space, with the enzyme retaining more than 90% of its initial activity. The rate of streptokinase release from the membranes varied from 0.01 to 0.04 mg/day per cm2 of membrane surface. The membrane samples tested in the work did not have any short-term toxic effects on the cells growing de novo on the membrane surface. The mitotic index of those cells was approximately 1.5%, and the number of non-viable cells on the surface of the polymer films did not exceed 3–4% of their total amount. The implantation of the synthesized polymers – as both individual films and coatings of nitinol stents – was not accompanied by any postoperative complications. The subsequent histological examination revealed no abnormalities. Two months after the implantation of polymer films, only traces of polylactide were found in the implant-surrounding tissues. The implantation of stents coated with streptokinase-containing polymers resulted in the formation of a mature and thick connective-tissue capsules. Thus, the polylactide membranes synthesized and tested in this work are biodegradable, possess the necessary mechanical properties and are capable of sustained and directed release of streptokinase macromolecules.


Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 535
Author(s):  
Alexander Mironov ◽  
Iosif Gershman ◽  
Eugeniy Gershman ◽  
Pavel Podrabinnik ◽  
Ekaterina Kuznetsova ◽  
...  

Potential relations of tribological characteristics of aluminum antifriction alloys with their compositions and mechanical properties were investigated. In this regard, the properties of eight aluminum alloys containing tin from 5.4% to 11% doped with lead, copper, silicon, zinc, magnesium, and titanium were studied. Mechanical properties such as hardness, strength, relative extension, and impact strength were analyzed. Within the tribological tests seizure load and wear of material were evaluated and secondary structures were studied afterwards. The absence of a definitive correlation between tribological behavior and mechanical properties was shown. It was determined that doping tin over 6% is excessive. The seizure load of the alloys increases with the magnesium content. Secondary structures of the alloys with higher wear rates contain one order less magnesium and tin.


2013 ◽  
Vol 9 (4) ◽  
pp. 5963-5973 ◽  
Author(s):  
Shilpa Sant ◽  
Dharini Iyer ◽  
Akhilesh K. Gaharwar ◽  
Alpesh Patel ◽  
Ali Khademhosseini

2011 ◽  
Vol 170 (2) ◽  
pp. 115-121 ◽  
Author(s):  
Jérémie Teisseire ◽  
Davy Dalmas ◽  
Stéphane Lohou ◽  
Claude Da Silva ◽  
Etienne Barthel

2011 ◽  
Vol 675-677 ◽  
pp. 357-360
Author(s):  
Li Jun Qin ◽  
Jian Hui Qiu ◽  
Ming Zhu Liu ◽  
Sheng Long Ding ◽  
Liang Shao ◽  
...  

The modified rice straw fibers (MRSF) were prepared by suspension polymerization technique of butyl acrylate (BA) monomer and rice straw fibers (RSF) in water solution. FTIR test indicated that PBA was coated and absorbed on RSF.The biodegradable composites were prepared with the MRSF and poly(lactic acid) (PLA) by HAAKE rheometer. Mechanical properties showed that the tensile strength of PLA/MRSF composites were (W (%) =7.98%) increased by 6 MPa compared with blank sample. The possible reason was that the good interfacial adhesion between PLA and MRSF, which was demonstrated by SEM.


2020 ◽  
Vol 11 (1) ◽  
pp. 04019048 ◽  
Author(s):  
Kazim S. Nadirov ◽  
Manap K. Zhantasov ◽  
Aizhan A. Yessentayeva ◽  
Gulmira Zh. Bimbetova ◽  
Saule A. Sakibayeva ◽  
...  

Symmetry ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 239 ◽  
Author(s):  
Saraswathi Nagandran ◽  
Pei Sean Goh ◽  
Ahmad Fauzi Ismail ◽  
Tuck-Whye Wong ◽  
Wan Rosmiza Zana Binti Wan Dagang

For decades, the water deficit has been a severe global issue. A reliable supply of water is needed to ensure sustainable economic development in population growth, industrialization and urbanization. To solve this major challenge, membrane-based water treatment technology has attracted a great deal of attention to produce clean drinking water from groundwater, seawater and brackish water. The emergence of nanotechnology in membrane science has opened new frontiers in the development of advanced polymeric membranes to enhance filtration performance. Nevertheless, some obstacles such as fouling and trade-off of membrane selectivity and permeability of water have hindered the development of traditional polymeric membranes for real applications. To overcome these issues, the modification of membranes has been pursued. The use of macromolecules for membrane modification has attracted wide interests in recent years owing to their interesting chemical and structural properties. Membranes modified with macromolecules have exhibited improved anti-fouling properties due to the alteration of their physiochemical properties in terms of the membrane morphology, porosity, surface charge, wettability, and durability. This review provides a comprehensive review of the progress made in the development of macromolecule modified polymeric membranes. The role of macromolecules in polymeric membranes and the advancement of these membrane materials for water solution are presented. The challenges and future directions for this subject are highlighted.


2015 ◽  
Vol 824 ◽  
pp. 145-150
Author(s):  
Jaroslav Pokorný ◽  
Milena Pavlíková ◽  
Zbyšek Pavlík

Lime and cement-lime industrially produced dry plaster mixtures are widely used building materials. These surface treatments can come into the contact with salt solutions which cause their degradation. On this account, the influence of calcium nitrate and calcium chloride water solution exposure on mechanical properties of several commercially produced mortars is researched in the paper. The prismatic specimens having dimensions of 40/40/160 mm are cured 28 days in humid environment. Then, the studied specimens are stored 112 days in both salt solutions and reference environment of distilled water. At specific time intervals, the compressive and bending strengths are measured and the obtained data are discussed.


Sign in / Sign up

Export Citation Format

Share Document