scholarly journals Reinforced Concrete Slabs Strengthened with Lap-Spliced Carbon TRC System

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3340
Author(s):  
Hyeong-Yeol Kim ◽  
Young-Jun You ◽  
Gum-Sung Ryu
Keyword(s):  
Reinforced Concrete ◽  
Concrete Slabs ◽  
Textile Reinforced Concrete ◽  
Lap Splice ◽  
Flexural Failure ◽  
Reinforced Concrete Slabs ◽  
Tensile Performance ◽  
Matrix Properties ◽  
Rc Slab ◽  
Rc Slabs

Construction with precast or prefabricated elements requires the connecting of structural joints. This study presents an accelerated construction method to strengthen reinforced concrete (RC) slab-type elements in flexure using precast lap-spliced textile-reinforced concrete (TRC) panels. The objectives of this study are to identify the tensile behavior of a TRC system with lap-spliced textile, and to experimentally validate the performance of the proposed connecting method by flexural failure test for the concrete slabs strengthened by TRC panels with lap-spliced textile. Twenty-one coupon specimens were tested in tension with two different matrix systems and three different lap splice lengths. The influence of the lap splice length and matrix properties on the tensile performance of the TRC system was significant. Five full-scale RC slabs were strengthened by the precast TRC panels with and without the lap splice, and was tested in flexure. The results of the failure test for the strengthened specimens showed that the ultimate load of the strengthened specimen with the TRC panel increased by a maximum of 24%, compared to that of the unstrengthened specimen. Moreover, the failure-tested specimens were re-strengthened by a new TRC panel system and tested again in flexure. The objective of the re-strengthening of the damaged RC slabs by the TRC panel is to investigate whether the yielded steel reinforcement can be replaced by the TRC panel. The initial cracking load and the stiffness of the re-strengthened specimens were significantly increased by re-strengthening.

Behavior of Two-way RC Slabs Combination Strengthened with CFRP Strips and Steel Sheets

2014 ◽  
Vol 501-504 ◽  
pp. 1048-1052 ◽  
Author(s):  
Xiao Jin Li ◽  
Yi Yan Lu ◽  
Na Li
Keyword(s):  
Reinforced Concrete ◽  
Concrete Slab ◽  
Concrete Slabs ◽  
Test Results ◽  
Reinforced Concrete Slab ◽  
Steel Sheets ◽  
Reinforced Concrete Slabs ◽  
Rc Slab ◽  
Rc Slabs ◽  
Strengthening Technique

A total of four two-way reinforced concrete slabs strengthened with three methods were tested. The four test specimens were one unstrengthened reinforced concrete slab (control), one slab strengthened with CFRP strips, one slab strengthened with steel sheets, and one slab strengthened with an innovative method of applying CFRP strips and steel sheets combination bonding to the tension face of the slab. The test results show the CFRP-Steel combination strengthened technique is a rapid and effective strengthening technique for two-way RC slab. The increase in ultimate capacities of CFRP-Steel combination strengthened slab is 221.1% over the control slab, 84.4% over the CFRP-strengthened slab, and 45.2% over the steel-strengthened slab. In addition, the CFRP-Steel combination strengthened slab exhibited superior ductility than the CFRP-strengthened slab.

scholarly journals Reinforced Concrete Slabs Strengthened with Carbon Textile Grid and Cementitious Grout

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5046
Author(s):  
Hyeong-Yeol Kim ◽  
Young-Jun You ◽  
Gum-Sung Ryu
Keyword(s):  
Plastic Deformation ◽  
Reinforced Concrete ◽  
Test Data ◽  
Concrete Slabs ◽  
Test Results ◽  
Structural Elements ◽  
Textile Reinforced Concrete ◽  
Rc Structures ◽  
Reinforced Concrete Slabs ◽  
Rc Slabs

A textile reinforced concrete (TRC) system has been widely used for repair and strengthening of deteriorated reinforced concrete (RC) structures. This paper proposes an accelerated on-site installation method of a TRC system by grouting to strengthen deteriorated RC structures. Four RC slabs were strengthened with one ply of carbon textile grid and 20 mm-thick cementitious grout. The TRC strengthened slab specimens were tested under flexure and the test results were compared with those of an unstrengthened specimen and theoretical solutions. Furthermore, the TRC strengthened specimens experienced longer plastic deformation after steel yield than the unstrengthened specimen. The TRC strengthened specimens exhibited many fine cracks and finally failed by rupture of the textile. Therefore, TRC system with the proposed installation method can effectively be used for strengthening of deteriorated RC structural elements. The theoretically computed steel yield and ultimate loads overestimate the test data by 11% and 5%, respectively.

Critical shear crack theory-based punching shear model for FRP-reinforced concrete slabs

2020 ◽  
pp. 136943322097814
Author(s):  
Xing-lang Fan ◽  
Sheng-jie Gu ◽  
Xi Wu ◽  
Jia-fei Jiang
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Shear Crack ◽  
Concrete Strength ◽  
Weight Ratio ◽  
Punching Shear ◽  
Concrete Slabs ◽  
Crack Theory ◽  
Reinforced Concrete Slabs ◽  
Rc Slabs

Owing to their high strength-to-weight ratio, superior corrosion resistance, and convenience in manufacture, fiber-reinforced polymer (FRP) bars can be used as a good alternative to steel bars to solve the durability issue in reinforced concrete (RC) structures, especially for seawater sea-sand concrete. In this paper, a theoretical model for predicting the punching shear strength of FRP-RC slabs is developed. In this model, the punching shear strength is determined by the intersection of capacity and demanding curve of FRP-RC slabs. The capacity curve is employed based on critical shear crack theory, while the demand curve is derived with the help of a simplified tri-linear moment-curvature relationship. After the validity of the proposed model is verified with experimental data collected from the literature, the effects of concrete strength, loading area, FRP reinforcement ratio, and effective depth of concrete slabs are evaluated quantitatively.

scholarly journals Strengthening of Concrete Element with Precast Textile Reinforced Concrete Panel and Grouting Material

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3856
Author(s):  
Young-Jun You ◽  
Hyeong-Yeol Kim ◽  
Gum-Sung Ryu ◽  
Kyung-Taek Koh ◽  
Gi-Hong Ahn ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Bending Test ◽  
Strengthening Effect ◽  
Textile Reinforced Concrete ◽  
Concrete Element ◽  
Rc Structures ◽  
Flexural Strengthening ◽  
Grouting Material ◽  
Rc Slab ◽  
Rc Slabs

Textile reinforced concrete (TRC) has widely been used for strengthening work for deteriorated reinforced concrete (RC) structures. The structural strengthening often requires accelerated construction with the aid of precast or prefabricated elements. This study presents an innovative method to strengthen an RC slab-type element in flexure using a precast panel made of carbon TRC. A total of five RC slabs were fabricated to examine the flexural strengthening effect. Two of them were strengthened with the precast panel and grouting material and another set of two slabs was additionally strengthened by tensile steel reinforcement. The full-scale slab specimens were tested by a three-point bending test and the test results were compared with the theoretical solutions. The results revealed that the ultimate load of the specimens strengthened with the TRC panel increased by at least 1.5 times compared to that of the unstrengthened specimen. The application of the precast TRC panel and grouting material for the strengthening of a prototype RC structure verified its outstanding constructability.

scholarly journals Experimental study of solid RC slabs strengthened on the upper surface

2018 ◽  
Vol 11 (2) ◽  
pp. 255-278
Author(s):  
C. O. CAMPOS ◽  
L. M. TRAUTWEIN ◽  
R. B. GOMES ◽  
G. MELO
Keyword(s):  
Experimental Study ◽  
Reinforced Concrete ◽  
Failure Load ◽  
Concrete Strength ◽  
Reinforcement Rate ◽  
Concrete Slabs ◽  
Minimum Reinforcement ◽  
Reinforced Concrete Slabs ◽  
Load Limit ◽  
Rc Slabs

Abstract The current study presents the results of tests conducted in 5 reinforced concrete slabs (415 cm x 415 cm x 7 cm) in order to experimentally check the possibility of reinforcing their upper surface, as well as to assess the adhesion between the old and the reinforcing concrete layers in the slab. The main variables were the concrete and reinforcement strength deficiencies. Reference slab “L1” was tested until reaching the failure load, whereas the others were tested until reaching certain load limit, reinforced and retested until reaching the failure load. All slabs failed under bending. The strengthening increased the failure load by 30% in slabs reinforced at minimum reinforcement rate when they were compared to similar non-reinforced slabs, regardless of the original concrete strength. None of the tests conducted in the reinforced slabs showed detachments or evidence of adhesion loss between the old and reinforcing concretes.

Data Base for Punching Shear Strength of Reinforced Concrete Slabs and Evaluation for CCES Equation

2011 ◽  
Vol 90-93 ◽  
pp. 933-939 ◽  
Author(s):  
Qiu Ning Yang ◽  
Ming Jie Mao ◽  
Sumio Hamada
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Concrete Slab ◽  
Punching Shear ◽  
Concrete Slabs ◽  
Reinforced Concrete Slab ◽  
Factors Affecting ◽  
Reinforced Concrete Slabs ◽  
Numerous Test ◽  
Rc Slabs

Several equations for punching shear strength of the reinforced concrete slab have been proposed in the world. These equations have their own factors affecting the strength. There are numerous test data for punching shear strength of RC slabs, which have been obtained by numerous researchers. A database with approximately 300 specimens has been structured through the present study. In the present study seven equations for punching shear strength are evaluated based on the database. CCES equation is also evaluated from the present database.

scholarly journals Concrete Slab-Type Elements Strengthened with Cast-in-Place Carbon Textile Reinforced Concrete System

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1437
Author(s):  
Hyeong-Yeol Kim ◽  
Young-Jun You ◽  
Gum-Sung Ryu ◽  
Gi-Hong Ahn ◽  
Kyung-Taek Koh
Keyword(s):  
Reinforced Concrete ◽  
Bond Strength ◽  
Surface Coating ◽  
Concrete Slab ◽  
Strengthening Effect ◽  
Reinforcing Bars ◽  
Textile Reinforced Concrete ◽  
Flexural Strengthening ◽  
Flexural Failure ◽  
Rc Slab

Although carbon textile reinforcement widely used to replace the steel reinforcing bars but the bonding strength of carbon textile is generally much smaller than that of common steel bars. This study examines the strengthening effect of concrete slab-type elements strengthened in flexure by carbon textile reinforcement according to the surface coating of textile and the amount of reinforcement. The effect of the surface coating of textile on the bond strength was evaluated through a direct pullout test with four different sizes of coating material. The surface coated specimens developed bond strength approximately twice that of the uncoated specimen. The flexural strengthening effect with respect to the amount of reinforcement was investigated by a series of flexural failure tests on full-scale reinforced concrete (RC) slab specimens strengthened by textile reinforced concrete (TRC) system. The flexural failure test results revealed that the TRC system-strengthened specimens develop load-carrying capacity that is improved to at least 150% compared to the non-strengthened specimen. The strengthening performance was not significantly influenced by the textile coating and was not proportional to the amount of reinforcement when this amount was increased, owing to the change in the failure mode. The outstanding constructability afforded by TRC strengthening was verified through field applications executing TRC strengthening by shotcreting on a concrete box culvert.

scholarly journals Experimental and Numerical Investigations on Flexural Behaviour of Prestressed Textile Reinforced Concrete Slabs

2021 ◽  
Vol 7 (6) ◽  
pp. 1084-1097
Author(s):  
Dang Quang Ngo ◽  
Huy Cuong Nguyen
Keyword(s):  
Tensile Strength ◽  
Reinforced Concrete ◽  
Three Dimensional ◽  
Concrete Slabs ◽  
High Tensile Strength ◽  
Flexural Behaviour ◽  
Textile Reinforced Concrete ◽  
Prestressing Steel ◽  
Reinforced Concrete Slabs ◽  
Three Dimensional Finite Element

Nowadays, concrete is mostly prestressed with steel. But the application of prestressing steel is restricted in a highly corrosive environment area due to corrosion of prestressing steel, leading to a reduction in strength and may cause sudden failure. Carbon textile is considered an alternate material due to its corrosive resistance property, high tensile strength, and perfectly elastic. Prestressing is also the only realistic way to utilize fully ultra-high tensile strength in carbon textile material. In this study, experimental and numerical analyses were carried out for the flexural behaviour of prestressed and non-prestressed carbon textile reinforced concrete slabs. This study also focuses on the influences of textile reinforcement ratios, prestressing grades on the flexural behaviour of carbon textile reinforced concrete (TRC). Fifteen precast TRC slabs were tested, of which six were prestressed to various levels with carbon textile. The obtained results show that prestressing textile reinforcement results in a higher load-bearing capacity, stiffness, and crack resistance for TRC slabs. The first-crack load of the prestressed specimens increased by about 85% compared with those of non-prestressed slabs. Three-dimensional finite element models were developed to provide a reliable estimation of global and local response. The modeling techniques accurately reproduced the experimental behaviour. Doi: 10.28991/cej-2021-03091712 Full Text: PDF

Sign in / Sign up

Export Citation Format

Share Document