scholarly journals Compressive Behavior, Microstructural Properties, and Freeze–Thaw Behavior of Tailing Recycled Aggregate Concrete with Waste Polypropylene Fiber Addition

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6712
Author(s):  
Fan Xu ◽  
Tao Li ◽  
Chenghua Li ◽  
Zhijun Li ◽  
Sheliang Wang ◽  
...  
Keyword(s):  
Polypropylene Fiber ◽  
Strain Curve ◽  
Peak Stress ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Cement Matrix ◽  
Peak Strain ◽  
Aggregate Concrete ◽  
Freeze Thaw ◽  
Thaw Cycle

To improve the high brittleness of recycled aggregate concrete containing iron ore tailings (TRAC), the feasibility of adding polypropylene fiber (PPF) to TRAC was studied by performing a compression stress–strain curve test, scanning electron microscope characterization, and a freeze–thaw cycle test. The results indicated that PPF had a beneficial impact on reducing the brittleness of TRAC. With the increase in PPF content, the peak strain increased, the elastic modulus decreased, and the peak stress and energy absorption capacity increased at first and then decreased. Furthermore, the microstructure investigation revealed that the interface friction between the PPF, aggregate, and cement matrix was the main source of energy dissipation. When the load acted on the concrete, the stress was dispersed to the fiber monofilaments, thus effectively enhancing the peak stress and peak strain of concrete and suppressing the generation and development of cracks in the concrete. In terms of freeze–thaw resistance, adding a small amount of PPF could reduce the negative effects of the freeze–thaw process on the cement matrix. On the premise of ensuring strength, the waste utilization should be as high as possible. Therefore, it was suggested that the content of PPF in fiber-reinforced tailings recycled aggregate concrete (TRAC-PP) should be 0.6%.

scholarly journals Axial Stress-Strain Performance of Recycled Aggregate Concrete Reinforced with Macro-Polypropylene Fibres

2021 ◽  
Vol 13 (10) ◽  
pp. 5741
Author(s):  
Muhammad Junaid Munir ◽  
Syed Minhaj Saleem Kazmi ◽  
Yu-Fei Wu ◽  
Xiaoshan Lin ◽  
Muhammad Riaz Ahmad
Keyword(s):  
Axial Stress ◽  
Peak Stress ◽  
Polypropylene Fibre ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Peak Strain ◽  
Stress Strain ◽  
Polypropylene Fibres ◽  
Aggregate Concrete

The addition of macro-polypropylene fibres improves the stress-strain performance of natural aggregate concrete (NAC). However, limited studies focus on the stress-strain performance of macro-polypropylene fibre-reinforced recycled aggregate concrete (RAC). Considering the variability of coarse recycled aggregates (CRA), more studies are needed to investigate the stress-strain performance of macro-polypropylene fibre-reinforced RAC. In this study, a new type of 48 mm long BarChip macro-polypropylene fibre with a continuously embossed surface texture is used to produce BarChip fibre-reinforced NAC (BFNAC) and RAC (BFRAC). The stress-strain performance of BFNAC and BFRAC is studied for varying dosages of BarChip fibres. Results show that the increase in energy dissipation capacity (i.e., area under the curve), peak stress, and peak strain of samples is observed with an increase in fibre dosage, indicating the positive effect of fibre addition on the stress-strain performance of concrete. The strength enhancement due to the addition of fibres is higher for BFRAC samples than BFNAC samples. The reduction in peak stress, ultimate strain, toughness and specific toughness of concrete samples due to the utilisation of CRA also reduces with the addition of fibres. Hence, the negative effect of CRA on the properties of concrete samples can be minimised by adding BarChip macro-polypropylene fibres. The applicability of the stress-strain model previously developed for macro-synthetic and steel fibre-reinforced NAC and RAC to BFNAC and BFRAC is also examined.

Experimental Research on Mechanical Properties of Recycled Aggregate Concrete under Uniaxial Loading

2013 ◽  
Vol 671-674 ◽  
pp. 1736-1740
Author(s):  
Xue Yong Zhao ◽  
Mei Ling Duan
Keyword(s):  
Elastic Modulus ◽  
Coarse Aggregate ◽  
Strain Curve ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Peak Strain ◽  
Stress Strain ◽  
Aggregate Concrete ◽  
Recycled Coarse Aggregate

The complete stress-strain curves of recycled aggregate concrete with different recycled coarse aggregate replacement percentages were tested and investigated. An analysis was made of the influence of varying recycled coarse aggregate contents on the complete stress-strain curve, peak stress, peak strain and elastic modulus etc. The elastic modulus of RC is lower than natural concrete (NC), and with the recycled coarse aggregate contents increase, it reduces. While with the increase of water-cement ratio (W/C), recycled concrete compressive strength and elastic modulus improve significantly. In addition, put forward a new equation on the relationship between Ec and fcu of the RC.

scholarly journals Stress–Strain Curve and Carbonation Resistance of Recycled Aggregate Concrete after Using Different RCA Treatment Techniques

2021 ◽  
Vol 11 (9) ◽  
pp. 4283
Author(s):  
Long Li ◽  
Dongxing Xuan ◽  
Chisun Poon
Keyword(s):  
Elastic Modulus ◽  
Strain Curve ◽  
Peak Stress ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Stress Strain Curve ◽  
Stress Strain ◽  
Aggregate Concrete ◽  
Treatment Techniques ◽  
Carbonation Resistance

Five recycled coarse aggregate (RCA) treatment techniques including flow-through carbonation, pressurized carbonation, wet carbonation, nano silica (NS) pre-spraying and combined pressurized carbonation with NS pre-spraying, were utilized to improve the performance of recycled aggregate concrete (RAC). The characteristics of the stress–strain curves of RACs including peak stress, peak strain, elastic modulus, ultimate strain and toughness were evaluated after using the above RCA treatment techniques. A theoretical model for natural aggregate concrete was used to analyse the stress–strain curve of RAC. Additionally, the carbonation resistance of RAC after using different RCA treatment techniques were investigated. The results showed that the calculated stress–strain curve of RAC based on the theoretical model matched well with the experimental results. Among the three types of carbonation techniques, pressurized carbonation caused the highest improvement in peak stress and elastic modulus of RAC, followed by flow-through carbonation, the last was wet carbonation. The NS pre-spraying method contributed to even higher improvement in peak stress and elastic modulus of RAC than the pressurized carbonation method. The combined pressurized carbonation with NS pre-spraying exhibited the highest enhancement of RAC because both the RCA and the new interface transition zone (ITZ) were improved. The carbonation resistance of RAC was improved after using all the studied RCA treatment techniques.

scholarly journals Water-glass Module on Mechanical Properties of Geopolymer Recycled Aggregate Concrete

2022 ◽  
Vol 2148 (1) ◽  
pp. 012060
Author(s):  
Zhaoyang Ding ◽  
Qun Su ◽  
Hongguan Bian ◽  
Qing Wang ◽  
Jinghai Zhou
Keyword(s):  
Mechanical Properties ◽  
Water Glass ◽  
Elasticity Modulus ◽  
Peak Stress ◽  
Hydration Product ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
National Standard ◽  
Peak Strain ◽  
Aggregate Concrete

Abstract Geopolymer recycled aggregate concrete (GRAC) was prepared by replacing cement with geopolymer and natural aggregate with wast concrete. The effect of water-glass modules on mechanical properties of GRAC was studied. It was found that there are tow kind of binding structures in geopolymer hydration product: C-A-S-H and N-A-S-H, they both contribute to the strength of GRAC. The value of size conversion coefficient of current national standard is inapplicable for GRAC, the calculation method of which is given in this paper. Elasticity modulus and peak stress of GRAC is proportional to water-glass modulus, and peak strain is inversely proportional and its constitutive equation was established.

scholarly journals Effects of Different Strain Rates on the Impact Properties of Recycled Aggregate Concrete Modified With Nanosilica Solution and Polyvinyl Alcohol Fiber

2021 ◽  
Vol 8 ◽  
Author(s):  
Xingguo Wang ◽  
Maolin Jiang ◽  
Xianggang Zhang ◽  
Zhaoxia Cheng ◽  
Jian Gong ◽  
...  
Keyword(s):  
Polyvinyl Alcohol ◽  
Strain Rate ◽  
Peak Stress ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Peak Strain ◽  
Aggregate Concrete ◽  
Impact Properties ◽  
Pva Fiber ◽  
The Impact

The recycled aggregate (RA) was modified by 2% nanosilica solution, and the split Hopkinson pressure bar (SHPB) test device was used to study the dynamic impact properties of the modified recycled aggregate concrete (RAC) mixed with polyvinyl alcohol (PVA) fibers. The RA replacement percentage, the amount of PVA fiber, and the strain rate were variables. The failure pattern, the stress–strain curve of the nanosilica solution, and PVA fiber-modified RAC were shown under different strain rate conditions. Dynamic peak stress, peak strain, and dynamic increase factor (DIF) of the specimens are discussed. The results showed that the stress and dynamic peak strain value of the specimen increased with the increase of the strain rate; moreover, with the increase of the RA replacement percentage and the PVA fiber content, the dynamic peak stress of the specimen decreases, while the dynamic peak strain and the DIF value increase. The incorporation of nanosilica-modified RA is beneficial to the improvement of the impact performance of RAC, and the incorporation of an appropriate amount of the PVA fiber effectively improves the deformability of RAC.

Analysis of Stress - Strain Curve on Recycled Aggregate Concrete under Uniaxial and Conventional Triaxial Compression

2010 ◽  
Vol 168-170 ◽  
pp. 900-905 ◽  
Author(s):  
Hai Feng Yang ◽  
Zhi Heng Deng ◽  
Ying Huang
Keyword(s):  
Lateral Pressure ◽  
Triaxial Compression ◽  
Strain Curve ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Peak Strain ◽  
Stress Strain Curve ◽  
Stress Strain ◽  
Aggregate Concrete ◽  
Confining Pressures

43 Φ50mm × 100mm column stress - strain curve tests are completed through RMT-201, which studied the compressive stress - strain curves of recycled aggregate concretes at distinct confining pressures under conventional triaxial stress state. This article, has analyzed the influence of different water-cement ratios, confining pressures on the curves, and raised constitutive equations of triaxial compression stress - strain curves for the different strength of recycled aggregate concretes.The brittleness indexes for recycled aggregate concrete under distinct confining pressures were analyzed contrastively. The result showed that: the failure modes of recycled aggregate concrete specimens are similar to those of ordinary concretes, but the final failure patterns of recycled aggregate and ordinary aggregate are quite different; with the increase of lateral pressure, the peak stress and peak strain of recycled aggregate concrete show linear growth; recycled aggregate concrete compressive stress - strain curves under the uniaxial and triaxial stress states are similar to ordinary aggregate concrete, yet peak strain shows signs of larger growth; with the increase of lateral pressure, the brittleness of recycled aggregate concrete reduces. The brittleness index of high-strength recycled aggregate concrete is larger wholly than that of ordinary recycled aggregate concrete and with confining pressure reaching a certain value, the brittleness index remains stable.

scholarly journals Experimental Study on the Effect of Freeze-Thaw Cycles on Axial Tension and Compression Performance of Concrete after Complete Carbonization

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Dafu Cao ◽  
Jiaqi Liu ◽  
Yanling Zhou ◽  
Wenjie Ge ◽  
Xin Zhang
Keyword(s):  
Compressive Stress ◽  
Axial Compression ◽  
Compressive Strain ◽  
Strain Curve ◽  
Peak Stress ◽  
Experimental Result ◽  
Peak Strain ◽  
Freeze Thaw ◽  
Axial Tension ◽  
Thaw Cycle

The effect of freeze-thaw cycles on the axial tension and axial compression properties of completely carbonized concrete are investigated in this study. Three grade concrete specimens (C30, C40, and C45) were fabricated. The freeze-thaw cycle test was carried out on the completely carbonized specimens, followed by axial tension and axial compression tests. The results show that completed carbonization increases the axial tensile peak stress of C30, C40, and C45 concrete specimens by 8.7%, 9.7%, and, 12.1%, respectively. The peak axial tension strain increased by 1.9%, 7.2%, and 9.6%, respectively. The peak axial compressive stress increased by 10.5%, 19.1%, and 24.1%, respectively. The peak axial compressive strain decreased by 13.7%, 14.1%, and 14.3%, respectively. With the increase of freeze-thaw cycles, the peak stress of tensile stress, peak strain, and compressive stress of concrete decrease continuously. The peak strain of compressive strain increases. The lower the strength grade of concrete, the faster the decline rate of stress and strain. According to the data changes of peak stress and peak strain at different times of freeze thaw after carbonization, the stress-strain curve fitting formula for concrete under freeze-thaw cycles after complete carbonization is put forward, which has a good coincidence with the experimental result.

Sign in / Sign up

Export Citation Format

Share Document