scholarly journals Experimental and Finite Element Study of Polymer Infilled Tube-in-Tube Buckling Restrained Brace

Metals ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1358
Author(s):  
Robel Wondimu Alemayehu ◽  
Youngsik Kim ◽  
Min Jae Park ◽  
Manwoo Park ◽  
Young K. Ju
Keyword(s):  
Finite Element ◽  
Element Analysis ◽  
Buckling Restrained Brace ◽  
Assembly Accuracy ◽  
Global Buckling ◽  
Tension And Compression ◽  
Stable Performance ◽  
Material Volume ◽  
Four Square ◽  
The Stability

This study presents a tube-in-tube buckling-restrained brace (BRB) infilled with lightweight and rapid hardening polymer. The proposed BRB consists of a circular or square tube core encased with a tube of similar shape and polymer infill. The tube-in-tube arrangement minimizes the filler material volume and enables the use of rolled steel section as opposed to welded profiles commonly utilized when large BRB axial strength is required, although welded profiles suffer from low assembly accuracy resulting from welding deformation. The infilled polymer has a density of approximately half that of mortar and requires a curing time of 24 h, enabling weight and fabrication time reduction. The stability and inelastic deformation capability of the BRB were investigated through brace and subassembly tests of six circular and four-square full-scale specimens, followed by finite element analysis. The test results show that circular BRB designed with a Pcr/Py ratio of 1.46 exhibited a stable hysteresis up to 1.42% and 1.06% core strain in tension and compression, respectively. Circular and square specimens designed with Pcr/Py ratios ranging from 0.82 to 1.06 exhibited stable hysteresis before failing by global buckling at compressive core stains ranging from 0.86% to 1.09%. The slot weld detail adopted for welding core projection stiffener displayed a stable performance in circular BRB specimens, while it resulted in large plastic strain demand in square BRB specimens, leading to core fracture at tensile core strains ranging from 0.64% to 0.71%.

scholarly journals A Finite Element Study on Compressive Resistance Degradation of Square and Circular Steel Braces under Axial Cyclic Loading

2021 ◽  
Vol 11 (13) ◽  
pp. 6094
Author(s):  
Hubdar Hussain ◽  
Xiangyu Gao ◽  
Anqi Shi
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cyclic Loading ◽  
Slenderness Ratio ◽  
Hysteretic Behavior ◽  
Element Analysis ◽  
Section Shape ◽  
Axial Cyclic Loading ◽  
Global Buckling ◽  
Parametric Studies

In this study, detailed finite element analysis was conducted to examine the seismic performance of square and circular hollow steel braces under axial cyclic loading. Finite element models of braces were constructed using ABAQUS finite element analysis (FEA) software and validated with experimental results from previous papers to expand the specimen’s matrix. The influences of cross-section shape, slenderness ratio, and width/diameter-to-thickness ratio on hysteretic behavior and compressive-tensile strength degradation were studied. Simulation results of parametric studies show that both square and circular hollow braces have a better cyclic performance with smaller slenderness and width/diameter-to-thickness ratios, and their compressive-tensile resistances ratio significantly decreases from cycle to cycle after the occurrence of the global buckling of braces.

Buckling characteristics of cut-out borne composite stiffened hyperbolic paraboloid shell panel

2021 ◽  
pp. 146442072110058
Author(s):  
Sarmila Sahoo
Keyword(s):  
Finite Element ◽  
Orientation Angle ◽  
Buckling Load ◽  
Benchmark Problems ◽  
Hyperbolic Paraboloid ◽  
Element Analysis ◽  
Load Effect ◽  
Global Buckling ◽  
Fiber Orientation Angle ◽  
Shell Panel

The present study investigates buckling characteristics of cut-out borne stiffened hyperbolic paraboloid shell panel made of laminated composites using finite element analysis to evaluate the governing differential equations of global buckling of the structure. The finite element code is validated by solving benchmark problems from literature. Different parametric variations are studied to find the optimum panel buckling load. Laminations, boundary conditions, depth of stiffener and arrangement of stiffeners are found to influence the panel buckling load. Effect of different parameters like cut-out size, shell width to thickness ratio, degree of orthotropy and fiber orientation angle of the composite layers on buckling load are also studied. Parametric and comparative studies are conducted to analyze the buckling strength of composite hyperbolic paraboloid shell panel with cut-out.

scholarly journals Inlay-Retained Dental Bridges—A Finite Element Analysis

2021 ◽  
Vol 11 (9) ◽  
pp. 3770
Author(s):  
Monica Tatarciuc ◽  
George Alexandru Maftei ◽  
Anca Vitalariu ◽  
Ionut Luchian ◽  
Ioana Martu ◽  
...  
Keyword(s):  
Finite Element ◽  
Young Patients ◽  
Maximum Pressure ◽  
Class Iii ◽  
Element Analysis ◽  
Dental Prostheses ◽  
Abutment Teeth ◽  
Fixed Dental Prostheses ◽  
Implant Therapy ◽  
The Stability

Inlay-retained dental bridges can be a viable minimally invasive alternative when patients reject the idea of implant therapy or conventional retained full-coverage fixed dental prostheses, which require more tooth preparation. Inlay-retained dental bridges are indicated in patients with good oral hygiene, low susceptibility to caries, and a minimum coronal tooth height of 5 mm. The present study aims to evaluate, through the finite element method (FEM), the stability of these types of dental bridges and the stresses on the supporting teeth, under the action of masticatory forces. The analysis revealed the distribution of the load on the bridge elements and on the retainers, highlighting the areas of maximum pressure. The results of our study demonstrate that the stress determined by the loading force cannot cause damage to the prosthetic device or to abutment teeth. Thus, it can be considered an optimal economical solution for treating class III Kennedy edentation in young patients or as a provisional pre-implant rehabilitation option. However, special attention must be paid to its design, especially in the connection area between the bridge elements, because the connectors and the retainers represent the weakest parts.

FINITE ELEMENT ANALYSIS OF A DENTAL IMPLANT

2003 ◽  
Vol 15 (02) ◽  
pp. 82-85 ◽  
Author(s):  
SHYH-CHOUR HUANG ◽  
CHANG-FENG TSAI
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Distribution ◽  
Element Model ◽  
Element Analysis ◽  
3 Dimensional ◽  
Dimensional Finite Element ◽  
The Stability ◽  
Stress Concentration Effect ◽  
Implant System

This paper presents results from using a 3-dimensional finite element model to assess the stress distribution in the bone, in the implant and in the abutment as a function of the implant's diameter and length. Increasing implant diameter and length increases the stability of the implant system. By using a finite element analysis, we show that implant length does not decrease the stress distribution of either the implant or the bone. Alternatively, however implant diameter increases reduce the stresses. For the latter case, the contact area between implant and bone is increased thus the stress concentration effect is decreased. Also, with increased implant diameter the bone loss is decreased and as a consequence the success rate is improved.

Structural Stability Evaluation for Lifting Lug Design of Large Marine Engine by Finite Element Analysis

2007 ◽  
Vol 353-358 ◽  
pp. 2855-2859
Author(s):  
W.C. Lee ◽  
Chae Sil Kim ◽  
J.B. Na ◽  
D.H. Lee ◽  
S.Y. Cho ◽  
...  
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Design Procedure ◽  
Steel Structures ◽  
Stability Evaluation ◽  
Element Analysis ◽  
Marine Engines ◽  
Dimensional Finite Element ◽  
The Stability ◽  
Three Dimensional Finite Element

Since most marine engines are generally very huge and heavy, it is required to keep safety from accidents in dealing them. Several types of lifting lugs have been used to assemble hundred ton–large steel structures and carry the assembled engines. Recently a few crashes have been occurred in carrying engines due to breaking down the lugs. Although the stability evaluation of the lifting lug has therefore been very important for safety, systematic design procedure of the lugs, which includes the structural analysis considering stability, has few reported. This paper describes the three dimensional finite element structural modeling for a lifting lug, the studies for determining the reasonable loading and boundary conditions, and the stability evaluation with the results of structural analyses. It should be very helpful for designing the other types of lifting lugs with safety.

Sign in / Sign up

Export Citation Format

Share Document