scholarly journals Review of Powder Bed Fusion Additive Manufacturing for Metals

Metals ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1391
Author(s):  
Leila Ladani ◽  
Maryam Sadeghilaridjani
Keyword(s):  
Additive Manufacturing ◽  
Three Dimensional ◽  
Disruptive Technology ◽  
Powder Bed ◽  
Powder Particles ◽  
Metallic Parts ◽  
The Cost ◽  
Scientific Questions ◽  
Metal Additive

Additive manufacturing (AM) as a disruptive technology has received much attention in recent years. In practice, however, much effort is focused on the AM of polymers. It is comparatively more expensive and more challenging to additively manufacture metallic parts due to their high temperature, the cost of producing powders, and capital outlays for metal additive manufacturing equipment. The main technology currently used by numerous companies in the aerospace and biomedical sectors to fabricate metallic parts is powder bed technology, in which either electron or laser beams are used to melt and fuse the powder particles line by line to make a three-dimensional part. Since this technology is new and also sought by manufacturers, many scientific questions have arisen that need to be answered. This manuscript gives an introduction to the technology and common materials and applications. Furthermore, the microstructure and quality of parts made using powder bed technology for several materials that are commonly fabricated using this technology are reviewed and the effects of several process parameters investigated in the literature are examined. New advances in fabricating highly conductive metals such as copper and aluminum are discussed and potential for future improvements is explored.

scholarly journals Material Reuse in Laser Powder Bed Fusion: Side Effects of the Laser—Metal Powder Interaction

Metals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 341 ◽  
Author(s):  
Eleonora Santecchia ◽  
Stefano Spigarelli ◽  
Marcello Cabibbo
Keyword(s):  
Additive Manufacturing ◽  
Side Effects ◽  
Metal Powder ◽  
Three Dimensional ◽  
High Energy ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Metal Additive Manufacturing ◽  
Metal Additive

Metal additive manufacturing is changing the way in which engineers and designers model the production of three-dimensional (3D) objects, with rapid growth seen in recent years. Laser powder bed fusion (LPBF) is the most used metal additive manufacturing technique, and it is based on the efficient interaction between a high-energy laser and a metal powder feedstock. To make LPBF more cost-efficient and environmentally friendly, it is of paramount importance to recycle (reuse) the unfused powder from a build job. However, since the laser–powder interaction involves complex physics phenomena and generates by-products which might affect the integrity of the feedstock and the final build part, a better understanding of the overall process should be attained. The present review paper is focused on the clarification of the interaction between laser and metal powder, with a strong focus on its side effects.

(Re)Designing for Part Consolidation: Understanding the Challenges of Metal Additive Manufacturing

2015 ◽  
Vol 137 (11) ◽  
Author(s):  
John Schmelzle ◽  
Eric V. Kline ◽  
Corey J. Dickman ◽  
Edward W. Reutzel ◽  
Griffin Jones ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
System Level ◽  
Powder Bed ◽  
Part Consolidation ◽  
Case Part ◽  
Metallic Parts ◽  
Design Freedom ◽  
Am Processes ◽  
Metal Additive

Additive manufacturing (AM) of metallic parts provides engineers with unprecedented design freedom. This enables designers to consolidate assemblies, lightweight designs, create intricate internal geometries for enhanced fluid flow or heat transfer performance, and fabricate complex components that previously could not be manufactured. While these design benefits may come “free” in many cases, it necessitates an understanding of the limitations and capabilities of the specific AM process used for production, the system-level design intent, and the postprocessing and inspection/qualification implications. Unfortunately, design for additive manufacturing (DfAM) guidelines for metal AM processes are nascent given the rapid advancements in metal AM technology recently. In this paper, we present a case study to provide insight into the challenges that engineers face when redesigning a multicomponent assembly into a single component fabricated using laser-based powder bed fusion for metal AM. In this case, part consolidation is used to reduce the weight by 60% and height by 53% of a multipart assembly while improving performance and minimizing leak points. Fabrication, postprocessing, and inspection issues are also discussed along with the implications on design. A generalized design approach for consolidating parts is presented to help designers realize the freedoms that metal AM provides, and numerous areas for investigation to improve DfAM are also highlighted and illustrated throughout the case study.

scholarly journals Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1121 ◽  
Author(s):  
Tiago A. Rodrigues ◽  
V. Duarte ◽  
R.M. Miranda ◽  
Telmo G. Santos ◽  
J.P. Oliveira
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Three Dimensional ◽  
Current Status ◽  
Powder Bed ◽  
Significant Research ◽  
Manufacturing Techniques ◽  
Materials Used ◽  
Metallic Parts ◽  
General Perspective

Additive manufacturing has revolutionized the manufacturing paradigm in recent years due to the possibility of creating complex shaped three-dimensional parts which can be difficult or impossible to obtain by conventional manufacturing processes. Among the different additive manufacturing techniques, wire and arc additive manufacturing (WAAM) is suitable to produce large metallic parts owing to the high deposition rates achieved, which are significantly larger than powder-bed techniques, for example. The interest in WAAM is steadily increasing, and consequently, significant research efforts are underway. This review paper aims to provide an overview of the most significant achievements in WAAM, highlighting process developments and variants to control the microstructure, mechanical properties, and defect generation in the as-built parts; the most relevant engineering materials used; the main deposition strategies adopted to minimize residual stresses and the effect of post-processing heat treatments to improve the mechanical properties of the parts. An important aspect that still hinders this technology is certification and nondestructive testing of the parts, and this is discussed. Finally, a general perspective of future advancements is presented.

scholarly journals An Investigation of the Metal Additive Manufacturing Issues and Perspective for Solutions Approach

2021 ◽  
Author(s):  
Omar Ahmed Al-Shebeeb
Keyword(s):  
Additive Manufacturing ◽  
Product Quality ◽  
Complex Geometry ◽  
Three Dimensional ◽  
Design For Additive Manufacturing ◽  
Potential Approach ◽  
Metal Additive Manufacturing ◽  
Metallic Parts ◽  
Metal Additive

Metal Additive Manufacturing (MAM) is delivering a new revolution in producing three-dimensional parts from metal-based material. MAM can fabricate metallic parts with complex geometry. However, this type of Additive Manufacturing (AM) is also impacted by several issues, challenges, and defects, which influence product quality and process sustainability. In this chapter, a review has been made on the types of small to medium-sized metallic parts currently manufactured using the MAM method. Then, investigation was undertaken to analyze the defects, challenges, and issues inherent to the design for additive manufacturing, by using MAM method. MAM-related obstacles are discussed in depth in this chapter and these obstacles occur in all size of metal printed parts. The reasons and solutions presented by previous researchers of these obstacles are discussed as well. A potential approach based on the author’s knowledge and analysis for solving these issues and challenges is suggested in this chapter. Based on the author’s conclusion, the MAM is not limited by part size, material, or geometry. In order to validate the potential solutions developed by the author of this work, performing actual MAM process is required and a local visit to manufacturing factories are also important to visualize these challenges and issues.

scholarly journals Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Min Yang ◽  
Lu Wang ◽  
Wentao Yan
Keyword(s):  
Additive Manufacturing ◽  
Phase Field ◽  
Field Model ◽  
Three Dimensional ◽  
Phase Field Model ◽  
Nucleation Theory ◽  
Experimental Result ◽  
Classical Nucleation Theory ◽  
Validation Experiment ◽  
Powder Particles

AbstractA three-dimensional phase-field model is developed to simulate grain evolutions during powder-bed-fusion (PBF) additive manufacturing, while the physically-informed temperature profile is implemented from a thermal-fluid flow model. The phase-field model incorporates a nucleation model based on classical nucleation theory, as well as the initial grain structures of powder particles and substrate. The grain evolutions during the three-layer three-track PBF process are comprehensively reproduced, including grain nucleation and growth in molten pools, epitaxial growth from powder particles, substrate and previous tracks, grain re-melting and re-growth in overlapping zones, and grain coarsening in heat-affected zones. A validation experiment has been carried out, showing that the simulation results are consistent with the experimental results in the molten pool and grain morphologies. Furthermore, the grain refinement by adding nanoparticles is preliminarily reproduced and compared against the experimental result in literature.

Hybrid Metal 3D Printing for Selective Polished Surface

2021 ◽  
Vol 1027 ◽  
pp. 136-140
Author(s):  
Sze Yi Mak ◽  
Kwong Leong Tam ◽  
Ching Hang Bob Yung ◽  
Wing Fung Edmond Yau
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Surface Finishing ◽  
Polished Surface ◽  
Post Processing ◽  
One Stop ◽  
Metal 3D Printing ◽  
Critical Challenge ◽  
Metal Additive

Metal additive manufacturing has found broad applications in diverse disciplines. Post processing to homogenize and improve surface finishing remains a critical challenge to additive manufacturing. We propose a novel one-stop solution of adopting hybrid metal 3D printing to streamlining the additive manufacturing workflow as well as to improve surface roughness quality of selective interior surface of the printed parts. This work has great potential in medical and aerospace industries where complicated and high-precision additive manufacturing is anticipated.

Sign in / Sign up

Export Citation Format

Share Document