scholarly journals All-in-One High-Power-Density Vibrational Energy Harvester with Impact-Induced Frequency Broadening Mechanisms

Micromachines ◽  
2021 ◽  
Vol 12 (9) ◽  
pp. 1083
Author(s):  
Yongqi Cao ◽  
Weihe Shen ◽  
Fangzhi Li ◽  
Huan Qi ◽  
Jiaxiang Wang ◽  
...  
Keyword(s):  
Power Generation ◽  
Cantilever Beam ◽  
External Load ◽  
Peak Power ◽  
Vibrational Energy ◽  
Nonlinear Frequency ◽  
Electromagnetic Power ◽  
Response Bandwidth ◽  
And Performance ◽  
High Output Voltage

This paper proposes an electrostatic-piezoelectric-electromagnetic hybrid vibrational power generator with different frequency broadening schemes. Both the nonlinear frequency broadening mechanisms and the synergized effect of the electrostatic-piezoelectric-electromagnetic hybrid structures are investigated. The structure and performance of the composite generator are optimized to improve the response bandwidth and performance. We propose that the electrostatic power generation module and the electromagnetic power generation module be introduced into the cantilever beam to make the multifunctional cantilever beam, realizing small integrated output loss, high output voltage, and high current characteristics. When the external load of the electrostatic power generation module is 10 kΩ, its peak power can reach 3.6 mW; when the external load of the piezoelectric power generation module is 2 kΩ, its peak power is 2.2 mW; and when the external load of the electromagnetic power generation module is 170 Ω, its peak power is 0.735 mW. This means that under the same space utilization, the performance is improved by 90%. Moreover, an energy management circuit (ECM) at the rear end of the device is added, through the energy conditioning circuit, the device can directly export a 3.3 V DC voltage to supply power to most of the sensing equipment. In this paper, the hybrid generator’s structure and performance are optimized, and the response bandwidth and performance are improved. In general, the primary advantages of the device in this paper are its larger bandwidth and enhanced performance.

Micro photosynthetic power cell for power generation from photosynthesis of algae

TECHNOLOGY ◽  
2015 ◽  
Vol 03 (02n03) ◽  
pp. 119-126 ◽  
Author(s):  
Mehdi Shahparnia ◽  
Muthukumaran Packirisamy ◽  
Philippe Juneau ◽  
Valter Zazubovich
Keyword(s):  
Power Generation ◽  
Current Density ◽  
External Load ◽  
Alternative Energy ◽  
Peak Power ◽  
Open Circuit Voltage ◽  
Open Circuit ◽  
Blue Green Algae ◽  
Power Cell ◽  
Test Conditions

Devices such as solar and fuel cells have been studied for many decades and noticeable improvements have been achieved. This paper proposes a Micro Photosynthetic Power Cell (μPSC) as an alternative energy-harvesting device based on photosynthesis of blue-green algae. The effect of important biodesign parameters on the performance of the device, such as no-load performance and voltage–current (V–I) characteristics, were studied. Open-circuit voltage as high as 993 mV was measured while a peak power of 175.37 μW was obtained under an external load of 850 Ω. The proposed μPSC device could produce a power density of 36.23 μW/cm2, voltage density of 80 mV/cm2 and current density of 93.38 μA/cm2 under test conditions.

Dynamic modeling of a galloping structure equipped with piezoelectric wafers and energy harvesting

2019 ◽  
Vol 67 (3) ◽  
pp. 142-154 ◽  
Author(s):  
M. Y. Abdollahzadeh Jamalabadi ◽  
Moon K. Kwak
Keyword(s):  
Energy Harvesting ◽  
Cantilever Beam ◽  
Vibrational Energy ◽  
Virtual Work ◽  
Power Level ◽  
Closed Form Solutions ◽  
Multi Scale ◽  
Rigid Mass ◽  
Piezoelectric Wafer ◽  
Piezoelectric Wafers

This study presents the analytical solution and experimental investigation of the galloping energy harvesting from oscillating elastic cantilever beam with a rigid mass. A piezoelectric wafer was attached to galloping cantilever beam to harvest vibrational energy in electric charge form. Based on Euler-Bernoulli beam assumption and piezoelectric constitutive equation, kinetic energy and potential energy of system were obtained for the proposed structure. Virtual work by generated charge and galloping force applied onto the rigid mass was obtained based on Kirchhoff's law and quasistatic assumption. Nonlinear governing electro-mechanical equations were then obtained using Hamilton's principle. As the system vibrates by self-exciting force, the fundamental mode is the only one excited by galloping. Hence, multi-degreeof-freedom equation of motion is simplified to one-degree-of-freedom model. In this study, closed-form solutions for electro-mechanical equations were obtained by using multi-scale method. Using these solutions, we can predict galloping amplitude, voltage amplitude and harvested power level. Numerical and experimental results are presented and discrepancies between experimental and numerical results are fully discussed.

scholarly journals A Preliminary Study on the IoT-Based Pavement Monitoring Platform Based on the Piezoelectric-Cantilever-Beam Powered Sensor

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
Yue Hou ◽  
Linbing Wang ◽  
Dawei Wang ◽  
Hailu Yang ◽  
Meng Guo ◽  
...  
Keyword(s):  
Cantilever Beam ◽  
Vibrational Energy ◽  
Acceleration Sensor ◽  
Piezoelectric Energy ◽  
Piezoelectric Cantilever ◽  
Pavement Monitoring ◽  
Preliminary Study ◽  
Operation Cycle ◽  
Infrastructure Health ◽  
Monitoring Platform

Green and sustainable power supply for sensors in pavement monitoring system has attracted attentions of civil engineers recently. In this paper, the piezoelectric energy harvesting technology is used to provide the power for the acceleration sensor and Radio Frequency (RF) communication. The developed piezoelectric bimorph cantilever beam is used for collecting the vibrational energy. The energy collection circuit is used to charge the battery, where the power can achieve 1.68 mW and can meet the power need of acceleration sensor for data collection and transmission in one operation cycle, that is, 32.8 seconds. Based on the piezoelectric-cantilever-beam powered sensor, the preliminary study on the IoT-based pavement monitoring platform is suggested, which provides a new applicable approach for civil infrastructure health monitoring.

Gigawatt peak power generation in a relativistic klystron amplifier driven by 1 kW seed-power

2013 ◽  
Vol 20 (11) ◽  
pp. 113102 ◽  
Author(s):  
Y. Wu ◽  
H. Q. Xie ◽  
Z. H. Li ◽  
Y. J. Zhang ◽  
Q. S. Ma
Keyword(s):  
Power Generation ◽  
Peak Power ◽  
Relativistic Klystron

Design and Fabrication of Stirling Engine for Solar Power Application

2021 ◽  
Vol 143 (11) ◽  
Author(s):  
Muhammad Hassan ◽  
Hussain Ahmed Tariq ◽  
Muhammad Anwar ◽  
Talha Irfan Khan ◽  
Asif Israr
Keyword(s):  
Computer Aided Design ◽  
Peak Power ◽  
Stirling Engine ◽  
Working Fluid ◽  
Cad Model ◽  
Stroke Length ◽  
And Performance ◽  
Power Application ◽  
Aided Design ◽  
Alpha Type

Abstract This paper showcases the designing, fabrication, and performance evaluation of 90-deg alpha-type Stirling engine. The diameters of the hot and cold cylinder are 50 mm and 44 mm, respectively, with a stroke length of 70 mm. The computer-aided design (CAD) model is developed by keeping in mind the ease of manufacturing, maintenance, bearing replacements, and lubrication. After fabrication, the engine is tested by heating the hot cylinder with air as a working fluid. The engine delivered peak power of 155 watts at the temperature of 1123 K and 968 K for hot and cold cylinders, respectively. This developed prototype can be commissioned with the solar parabolic concentrator in the future based on the smooth operation while delivering power.

Experimental Periodic Localized Motions in Coupled Beams With Active Nonlinearities

1995 ◽  
Author(s):  
Melvin E. King ◽  
Johannes Aubrecht ◽  
Alexander F. Vakakis
Keyword(s):  
Steady State ◽  
Vibrational Energy ◽  
Normal Modes ◽  
Coupled System ◽  
Nonlinear Normal Modes ◽  
Nonlinear Frequency ◽  
Nonlinear Phenomenon ◽  
Response Curves ◽  
Nonlinear Motion ◽  
Spatially Extended

Abstract Steady-state nonlinear motion confinement is experimentally studied in a system of weakly coupled cantilever beams with active stiffness nonlinearities. Quasi-static swept-sine tests are performed by periodically forcing one of the beams at frequencies close to the first two closely-spaced modes of the coupled system, and experimental nonlinear frequency response curves for certain nonlinearity levels are generated. Of particular interest is the detection of strongly localized steady-state motions, wherein vibrational energy becomes spatially confined mainly to the directly excited beam. Such motions exist in neighborhoods of strongly localized anti-phase nonlinear normal modes (NNMs) which bifurcate from a spatially extended NNMs of the system. Steady-state nonlinear motion confinement is an essentially nonlinear phenomenon with no counterpart in linear theory, and can be implemented in vibration and shock isolation designs of mechanical systems.

Sign in / Sign up

Export Citation Format

Share Document