scholarly journals Nano-Scale Rare Earth Distribution in Fly Ash Derived from the Combustion of the Fire Clay Coal, Kentucky

Minerals ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 206 ◽  
Author(s):  
James Hower ◽  
Dali Qian ◽  
Nicolas Briot ◽  
Eduardo Santillan-Jimenez ◽  
Madison Hood ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Rare Earth ◽  
Fly Ash ◽  
Electron Diffraction ◽  
Eastern Kentucky ◽  
Nano Scale ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Diffraction Patterns ◽  
Fire Clay

Fly ash from the combustion of eastern Kentucky Fire Clay coal in a southeastern United States pulverized-coal power plant was studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and selected area electron diffraction (SAED). TEM combined with elemental analysis via energy dispersive X-ray spectroscopy (EDS) showed that rare earth elements (REE; specifically, La, Ce, Nd, Pr, and Sm) were distributed within glassy particles. In certain cases, the REE were accompanied by phosphorous, suggesting a monazite or similar mineral form. However, the electron diffraction patterns of apparent phosphate minerals were not definitive, and P-lean regions of the glass consisted of amorphous phases. Therefore, the distribution of the REE in the fly ash seemed to be in the form of TEM-visible nano-scale crystalline minerals, with additional distributions corresponding to overlapping ultra-fine minerals and even true atomic dispersion within the fly ash glass.

HRTEM Investigation of Precipitates in Al-Zn-In-Mg-Ti-Ce Anode Alloy

2011 ◽  
Vol 189-193 ◽  
pp. 1036-1039
Author(s):  
Jing Ling Ma ◽  
Jiu Ba Wen ◽  
Yan Fu Yan
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Electron Diffraction ◽  
Hexagonal Structure ◽  
Orientation Relation ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Scanning Electron

The precipitates of Al-5Zn-0.02In-1Mg-0.05Ti-0.5Ce (wt %) anode alloy were studied by scanning electron microscopy, X-ray microanalysis, high resolution transmission electron microscopy and selected area electron diffraction analyses in the present work. The results show that the alloy mainly contains hexagonal structure MgZn2 and tetragonal structure Al2CeZn2 precipitates. From high resolution transmission electron microscopy and selected area electron diffraction, aluminium, Al2CeZn2 and MgZn2 phases have [0 1 -1]Al|| [1 -10]Al2CeZn2|| [-1 1 0 1]MgZn2orientation relation, and Al2CeZn2 and MgZn2 phases have the [0 2 -1]Al2CeZn2|| [0 1 -10]MgZn2orientation relation.

scholarly journals PHASE-TRANSFORMATION DYNAMICS AND CHARACTERIZATION OF PRECIPITATES IN THE Cu-3Ti-3Ni-0.5Si ALLOY

2021 ◽  
Vol 55 (4) ◽  
Author(s):  
Jia Liu ◽  
Jituo Liu ◽  
Xianhui Wang ◽  
Chong Fu ◽  
Yanlong Wang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Electrical Conductivity ◽  
Phase Transformation ◽  
Volume Fraction ◽  
Formation Enthalpy ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
The Matrix ◽  
Diffraction Patterns ◽  
Precipitated Phases

In this paper we investigated the phase-transformation dynamics of the Cu-3Ti-3Ni-0.5Si alloy by applying the Avrami method to phase-transformation dynamics and electrical conductivity based on the relationship between the electrical conductivity and the volume fraction of precipitates in the Cu-3Ti-3Ni-0.5Si alloy. The results corroborated well with the experimental data. The microstructure and precipitated phases were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The analysis of the selected-area electron-diffraction patterns indicated that the precipitates formed in the matrix of the Cu-3Ti-3Ni-0.5Si alloy during aging, correspond to the Ni3Ti, Ni3Si, and Ni2Si phases. According to the values of formation enthalpy and cohesive energy determined by first-principle calculations, the formation of the Ni2Si phase is more favorable compared to the Ni3Si and Ni3Ti phases, and the Ni3Ti exhibits improved structural stability compared to the Ni2Si and Ni3Si phases.

Compositional variation within some sedimentary chlorites and some comments on their origin

1985 ◽  
Vol 49 (352) ◽  
pp. 375-386 ◽  
Author(s):  
C. D. Curtis ◽  
C. R. Hughes ◽  
J. A. Whiteman ◽  
C. K. Whittle
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electron Diffraction ◽  
Single Crystal ◽  
Compositional Variation ◽  
Analytical Transmission Electron Microscopy ◽  
Decomposition Reactions ◽  
Transmission Electron ◽  
Diffraction Patterns ◽  
Crystal Electron

AbstractA range of authigenic sedimentary chlorites from sandstones has been studied by analytical transmission electron microscopy. Selected area (single crystal) electron diffraction patterns are of the Ib (β = 90°) polytype confirming the earlier observations of Hayes (1970).TEM analyses show all samples to be relatively rich in both Al and Fe. In the general formula (Mg,Fe,Al)n [Si8−xAlxO20](OH)16, x varies between 1.5 and 2.6; Fe/(Fe + Mg) between 0.47 and 0.83 and n between 10.80 and 11.54. Octahedral Al is close to 3 in this formulation and Fe2+ predominates over Fe3+. Swelling chlorites have significantly different compositions which are consistent with smectite/chlorite interstratifications.The Ib (β = 90°) polytype appears to be stable under conditions of moderate to deep burial. It replaces berthierine and swelling chlorites formed at lower temperatures. As commonly seen in grain coatings, however, it precipitates from porewater; solutes probably being contributed from several mineral decomposition reactions.

Electron microscopic investigation of the structure and morphology of syndiotactic polypropylene

1989 ◽  
Vol 47 ◽  
pp. 358-359
Author(s):  
Andrew J. Lovinger ◽  
Bernard Lotz ◽  
Don D. Davis
Keyword(s):  
Electron Microscopy ◽  
Electron Diffraction ◽  
Dark Field ◽  
Microscopic Investigation ◽  
Electron Microscopic Investigation ◽  
Dilute Solution ◽  
Electron Microscopic ◽  
Syndiotactic Polypropylene ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron

In contrast to its isotactic isomer, syndiotactic polypropylene has received only little attention. Our main source of understanding of its structure is the X-ray study by Conradini et al., who found the chains to have a (t2g2)2 conformation (corresponding to a 4∗2/1 helix with molecular repeat 0.74 nm), and to be packed in a C-centered unit cell as shown in the left side of Fig. 1. We have recently begun a study of the structure, crystallization, and morphology of syndiotactic polypropylene using electron microscopy and diffraction. Here we concentrate specifically on the electron-diffraction evidence as a function of temperature, in order to obtain an understanding of the evolution and variation of structure in this polymer.Thin films of syndiotactic polypropylene (synthesized by Dr. R. E. Cais as reported previously) were prepared by casting from dilute solution in xylenes at ca. 140°c onto freshly cleaved mica substrates. Following evaporation of the solvent, they were melted and then isothermally crystallized at a variety of temperatures. After shadowing with Pt/C and coating with carbon, they were floated off their substrates for examination by transmission electron microscopy (bright- and dark-field) and selected-area electron diffraction at 100-200 keV.

Precipitation Hardening in Fe-1.03%Cu Structural Steel

2007 ◽  
Vol 561-565 ◽  
pp. 111-114
Author(s):  
Hui Ping Ren ◽  
Hai Yan Wang ◽  
Zong Chang Liu ◽  
Lin Chen
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Precipitation Hardening ◽  
Solution Treatment ◽  
Zone Axis ◽  
High Density ◽  
Nano Scale ◽  
Transmission Electron ◽  
Steel Strength ◽  
Diffraction Patterns

The precipitation of copper during aging at 650oC within ferrite in high-purity Fe-1.03wt%Cu steel was examined by transmission electron microscopy, and the influence of precipitation particles on property of experimental steel was investigated. The microstructure and the corresponding diffraction patterns of different zone axis were analyzed. Nano-scale copper-rich clusters with B2-like structure and high density dislocation around precipitate was observed during either solution treatment or aging. Nano-scale metastable precipitates and high density around them were found to play the most important role for increasing steel strength.

On the interpretation of electron diffraction patterns from materials containing planar boundaries: the intergrowth tungsten bronzes

1990 ◽  
Vol 429 (1876) ◽  
pp. 91-117 ◽  
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Electron Diffraction ◽  
High Resolution Electron Microscopy ◽  
Optical Diffraction ◽  
General Interest ◽  
Transmission Electron ◽  
Resolution Electron ◽  
Resolution Imaging ◽  
Diffraction Patterns

Materials containing planar boundaries are of general interest and complete understanding of their structures is important. When direct imaging of the boundaries by, for instance, high-resolution electron microscopy, is impracticable, details of their structure and arrangement may be obtained from electron diffraction patterns. Such patterns are discussed in terms of those from intergrowth tungsten bronzes as specific examples. Fourier-transform calculations for proposed structures have been made to establish, in conjunction with optical-diffraction analogues, the features of the far-field diffraction patterns. These results have been compared with diffraction patterns obtained experimentally by transmission electron microscopy. The aim of the study, to show that the arrangement of the boundaries in these complicated phases can be deduced from their diffraction patterns without the need for high-resolution imaging, has been achieved. The steps to be taken to make these deductions are set out.

scholarly journals Odd electron diffraction patterns in silicon nanowires and silicon thin films explained by microtwins and nanotwins

2009 ◽  
Vol 42 (2) ◽  
pp. 242-252 ◽  
Author(s):  
Cyril Cayron ◽  
Martien Den Hertog ◽  
Laurence Latu-Romain ◽  
Céline Mouchet ◽  
Christopher Secouard ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Electron Diffraction ◽  
Silicon Nanowires ◽  
Si Nanowires ◽  
Silicon Thin Films ◽  
Transmission Electron ◽  
Diffraction Patterns

Odd electron diffraction patterns (EDPs) have been obtained by transmission electron microscopy (TEM) on silicon nanowires grownviathe vapour–liquid–solid method and on silicon thin films deposited by electron beam evaporation. Many explanations have been given in the past, without consensus among the scientific community: size artifacts, twinning artifacts or, more widely accepted, the existence of new hexagonal Si phases. In order to resolve this issue, the microstructures of Si nanowires and Si thin films have been characterized by TEM, high-resolution transmission electron microscopy (HRTEM) and high-resolution scanning transmission electron microscopy. Despite the differences in the geometries and elaboration processes, the EDPs of the materials show great similarities. The different hypotheses reported in the literature have been investigated. It was found that the positions of the diffraction spots in the EDPs could be reproduced by simulating a hexagonal structure withc/a= 12(2/3)1/2, but the intensities in many EDPs remained unexplained. Finally, it was established that all the experimental data,i.e.EDPs and HRTEM images, agree with a classical cubic silicon structure containing two microstructural defects: (i) overlapping Σ3 microtwins which induce extra spots by double diffraction, and (ii) nanotwins which induce extra spots as a result of streaking effects. It is concluded that there is no hexagonal phase in the Si nanowires and the Si thin films presented in this work.

Sign in / Sign up

Export Citation Format

Share Document