scholarly journals Self-Assembly of Short Elastin-like Amphiphilic Peptides: Effects of Temperature, Molecular Hydrophobicity and Charge Distribution

Molecules ◽  
2019 ◽  
Vol 24 (1) ◽  
pp. 202 ◽  
Author(s):  
Meiwen Cao ◽  
Yang Shen ◽  
Yu Wang ◽  
Xiaoling Wang ◽  
Dongxiang Li
Keyword(s):  
Charge Distribution ◽  
Self Assembly ◽  
Temperature Increase ◽  
The Self ◽  
Assembly Process ◽  
Amphiphilic Peptides ◽  
Self Assembling ◽  
Amphiphilic Peptide ◽  
Effects Of Temperature ◽  
Thermo Sensitivity

A novel type of self-assembling peptides has been developed by introducing the basic elastomeric β-turn units of elastin protein into the amphiphilic peptide molecules. The self-assembly behaviors of such peptides are affected by the overall molecular hydrophobicity, charge distribution and temperature. The molecules with higher hydrophobicity exhibit better self-assembling capability to form long fibrillar nanostructures. For some peptides, the temperature increase can not only promote the self-assembly process but also change the self-assembly routes. The self-assembly of the peptides with two charges centralized on one terminal show higher dependence on temperature than the peptides with two charges distributed separately on the two terminals. The study probes into the self-assembly behaviors of short elastin-like peptides and is of great help for developing novel self-assembling peptides with thermo sensitivity.

Self-Assembly of an Amphiphilic OEG-Linked Glutamide Lipid

2017 ◽  
Vol 70 (1) ◽  
pp. 52 ◽  
Author(s):  
Shuo Wang ◽  
Youguo Zhang ◽  
Qiang Li ◽  
Rongqin Sun ◽  
Lin Ma ◽  
...  
Keyword(s):  
Self Assembly ◽  
Driving Forces ◽  
Size Control ◽  
The Self ◽  
Amphiphilic Peptides ◽  
Hydrogen Bonding Interactions ◽  
Assembly Mechanism ◽  
Wide Range ◽  
Added Water ◽  
Amphiphilic Peptide

Amphiphilic peptides with or without oligoethylene glycol (OEG) chains based on 3,4-bis(benzyloxy)benzoic-linked glutamide were designed and their self-assembly was investigated. It was found that the amphiphilic peptide 3 with OEG chains could not only form stable gels in a wide range of solvents, but also showed better solubility in solvents than those without OEG chains. Fibrillar and nanotube structures were found in the gels formed and the width of the fibres could be tuned with added water content. The UV-vis and XRD results suggested that the driving forces for the peptide self-assembly were mainly intermolecular π–π and hydrogen-bonding interactions. These results provide a deeper understanding of the self-assembly mechanism and size control of nanofibrils formed by an OEG-based amphiphilic peptide.

scholarly journals Gas barrier enhancement of uncharged apolar polymeric films by self-assembling stratified nano-composite films

RSC Advances ◽  
2019 ◽  
Vol 9 (19) ◽  
pp. 10938-10947 ◽  
Author(s):  
Ali Akbar Motedayen ◽  
Mohammadreza Rezaeigolestani ◽  
Carole Guillaume ◽  
Valérie Guillard ◽  
Nathalie Gontard
Keyword(s):  
Self Assembly ◽  
Hydrophobic Interactions ◽  
Composite Films ◽  
The Self ◽  
Polymeric Films ◽  
Assembly Process ◽  
Gas Barrier ◽  
Nano Composite ◽  
Self Assembling ◽  
First Time

The gas (O2 and CO2) permeability of an innovative stratified PE–organoclay (LLDPE/OMMT) nano-enabled composite films was studied for the first time and related to the self-assembly process driven by hydrophobic interactions.

scholarly journals Directed Self-Assembly of Polystyrene Nanospheres by Direct Laser-Writing Lithography

Nanomaterials ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 280
Author(s):  
Eleonora Cara ◽  
Federico Ferrarese Lupi ◽  
Matteo Fretto ◽  
Natascia De Leo ◽  
Mauro Tortello ◽  
...  
Keyword(s):  
Self Assembly ◽  
Large Scale ◽  
The Self ◽  
Assembly Process ◽  
Systematic Assessment ◽  
Self Assembling ◽  
Polystyrene Nanospheres ◽  
Direct Laser ◽  
Novel Method ◽  
Spinning Speed

In this work, we performed a systematic study on the effect of the geometry of pre-patterned templates and spin-coating conditions on the self-assembling process of colloidal nanospheres. To achieve this goal, large-scale templates, with different size and shape, were generated by direct laser-writer lithography over square millimetre areas. When deposited over patterned templates, the ordering dynamics of the self-assembled nanospheres exhibits an inverse trend with respect to that observed for the maximisation of the correlation length ξ on a flat surface. Furthermore, the self-assembly process was found to be strongly dependent on the height (H) of the template sidewalls. In particular, we observed that, when H is 0.6 times the nanospheres diameter and spinning speed 2500 rpm, the formation of a confined and well ordered monolayer is promoted. To unveil the defects generation inside the templates, a systematic assessment of the directed self-assembly quality was performed by a novel method based on Delaunay triangulation. As a result of this study, we found that, in the best deposition conditions, the self-assembly process leads to well-ordered monolayer that extended for tens of micrometres within the linear templates, where 96.2% of them is aligned with the template sidewalls.

Staging the Self-Assembly Process: Inspiration from Biological Development

2014 ◽  
Vol 20 (1) ◽  
pp. 29-53 ◽  
Author(s):  
Navneet Bhalla ◽  
Peter J. Bentley ◽  
Peter D. Vize ◽  
Christian Jacob
Keyword(s):  
Self Assembly ◽  
Body Plan ◽  
The Self ◽  
Time Interval ◽  
Assembly Process ◽  
Target Structure ◽  
Self Assembling ◽  
Orbital Shaking ◽  
Biological Development ◽  
Bonding Mechanisms

One of the practical challenges facing the creation of self-assembling systems is being able to exploit a limited set of fixed components and their bonding mechanisms. The method of staging divides the self-assembly process into time intervals, during which components can be added to, or removed from, an environment at each interval. Staging addresses the challenge of using components that lack plasticity by encoding the construction of a target structure in the staging algorithm itself and not exclusively in the design of the components. Previous staging strategies do not consider the interplay between component physical features (morphological information). In this work we use morphological information to stage the self-assembly process, during which components can only be added to their environment at each time interval, to demonstrate our concept. Four experiments are presented, which use heterogeneous, passive, mechanical components that are fabricated using 3D printing. Two orbital shaking environments are used to provide energy to the components and to investigate the role of morphological information with component movement in either two or three spatial dimensions. The benefit of our staging strategy is shown by reducing assembly errors and exploiting bonding mechanisms with rotational properties. As well, a doglike target structure is used to demonstrate in theory how component information used at an earlier time interval can be reused at a later time interval, inspired by the use of a body plan in biological development. We propose that a staged body plan is one method toward scaling self-assembling systems with many interacting components. The experiments and body plan example demonstrate, as proof of concept, that staging enables the self-assembly of more complex morphologies not otherwise possible.

Directive Effect of Chain Length in Modulating Peptide Nano-assemblies

2020 ◽  
Vol 27 (9) ◽  
pp. 923-929
Author(s):  
Gaurav Pandey ◽  
Prem Prakash Das ◽  
Vibin Ramakrishnan
Keyword(s):  
Electron Microscopy ◽  
Amino Acids ◽  
Light Scattering ◽  
Chain Length ◽  
Self Assembly ◽  
The Self ◽  
Ionic Charge ◽  
Self Assembling ◽  
Biophysical Techniques

Background: RADA-4 (Ac-RADARADARADARADA-NH2) is the most extensively studied and marketed self-assembling peptide, forming hydrogel, used to create defined threedimensional microenvironments for cell culture applications. Objectives: In this work, we use various biophysical techniques to investigate the length dependency of RADA aggregation and assembly. Methods: We synthesized a series of RADA-N peptides, N ranging from 1 to 4, resulting in four peptides having 4, 8, 12, and 16 amino acids in their sequence. Through a combination of various biophysical methods including thioflavin T fluorescence assay, static right angle light scattering assay, Dynamic Light Scattering (DLS), electron microscopy, CD, and IR spectroscopy, we have examined the role of chain-length on the self-assembly of RADA peptide. Results: Our observations show that the aggregation of ionic, charge-complementary RADA motifcontaining peptides is length-dependent, with N less than 3 are not forming spontaneous selfassemblies. Conclusion: The six biophysical experiments discussed in this paper validate the significance of chain-length on the epitaxial growth of RADA peptide self-assembly.

Self-assembling behaviour of a modified aromatic amino acid in competitive medium

Soft Matter ◽  
2020 ◽  
Vol 16 (28) ◽  
pp. 6599-6607 ◽  
Author(s):  
Pijush Singh ◽  
Souvik Misra ◽  
Nayim Sepay ◽  
Sanjoy Mondal ◽  
Debes Ray ◽  
...  
Keyword(s):  
Amino Acid ◽  
Self Assembly ◽  
Aromatic Amino Acid ◽  
Photophysical Properties ◽  
Solvent Mixture ◽  
The Self ◽  
Solvent Ratio ◽  
Self Assembling

The self-assembly and photophysical properties of 4-nitrophenylalanine (4NP) are changed with the alteration of solvent and final self-assembly state of 4NP in competitive solvent mixture and are dictated by the solvent ratio.

scholarly journals Self-Assembled Nanomaterials Based on Complementary Sn(IV) and Zn(II)-Porphyrins, and Their Photocatalytic Degradation for Rhodamine B Dye

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3598
Author(s):  
Nirmal K. Shee ◽  
Hee-Joon Kim
Keyword(s):  
Aqueous Solution ◽  
Visible Light Irradiation ◽  
Rhodamine B ◽  
Self Assembly ◽  
The Self ◽  
Assembly Process ◽  
Absorption Bands ◽  
Ligand Coordination ◽  
Rhodamine B Dye ◽  
Metal Ligand

A series of porphyrin triads (1–6), based on the reaction of trans-dihydroxo-[5,15-bis(3-pyridyl)-10,20-bis(phenyl)porphyrinato]tin(IV) (SnP) with six different phenoxy Zn(II)-porphyrins (ZnLn), was synthesized. The cooperative metal–ligand coordination of 3-pyridyl nitrogens in the SnP with the phenoxy Zn(II)-porphyrins, followed by the self-assembly process, leads to the formation of nanostructures. The red-shifts and remarkable broadening of the absorption bands in the UV–vis spectra for the triads in CHCl3 indicate that nanoaggregates may be produced in the self-assembly process of these triads. The emission intensities of the triads were also significantly reduced due to the aggregation. Microscopic analyses of the nanostructures of the triads reveal differences due to the different substituents on the axial Zn(II)-porphyrin moieties. All these nanomaterials exhibited efficient photocatalytic performances in the degradation of rhodamine B (RhB) dye under visible light irradiation, and the degradation efficiencies of RhB in aqueous solution were observed to be 72~95% within 4 h. In addition, the efficiency of the catalyst was not impaired, showing excellent recyclability even after being applied for the degradation of RhB in up to five cycles.

scholarly journals Metal Oxide-Related Dendritic Structures: Self-Assembly and Applications for Sensor, Catalysis, Energy Conversion and Beyond

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1686
Author(s):  
Ruohong Sui ◽  
Paul A. Charpentier ◽  
Robert A. Marriott
Keyword(s):  
Metal Oxide ◽  
Energy Conversion ◽  
Self Assembly ◽  
Hierarchical Structures ◽  
The Self ◽  
Assembly Process ◽  
Electronic Noses ◽  
Dendritic Nanostructures ◽  
Energy Conversion And Storage ◽  
The Aesthetic

In the past two decades, we have learned a great deal about self-assembly of dendritic metal oxide structures, partially inspired by the nanostructures mimicking the aesthetic hierarchical structures of ferns and corals. The self-assembly process involves either anisotropic polycondensation or molecular recognition mechanisms. The major driving force for research in this field is due to the wide variety of applications in addition to the unique structures and properties of these dendritic nanostructures. Our purpose of this minireview is twofold: (1) to showcase what we have learned so far about how the self-assembly process occurs; and (2) to encourage people to use this type of material for drug delivery, renewable energy conversion and storage, biomaterials, and electronic noses.

Sign in / Sign up

Export Citation Format

Share Document