scholarly journals Sol-Gel Synthesis of Ceria-Zirconia-Based High-Entropy Oxides as High-Promotion Catalysts for the Synthesis of 1,2-Diketones from Aldehyde

Molecules ◽  
2021 ◽  
Vol 26 (20) ◽  
pp. 6115
Author(s):  
Dalibor Tatar ◽  
Jelena Kojčinović ◽  
Berislav Marković ◽  
Aleksandar Széchenyi ◽  
Aleksandar Miletić ◽  
...  
Keyword(s):  
Sol Gel ◽  
Direct Conversion ◽  
Lewis Acidity ◽  
Reaction Conditions ◽  
Oxide Structure ◽  
High Entropy ◽  
Heterogeneous Catalytic ◽  
Structure Framework ◽  
Acid Catalyzed ◽  
Sol Gel Synthesis

Efficient Lewis-acid-catalyzed direct conversion of aldehydes to 1,2-diketones in the liquid phase was enabled by using newly designed and developed ceria–zirconia-based high-entropy oxides (HEOs) as the actual catalysts. The synergistic effect of various cations incorporated in the same oxide structure (framework) was partially responsible for the efficiency of multicationic materials compared to the corresponding single-cation oxide forms. Furthermore, a clear, linear relationship between the Lewis acidity and the catalytic activity of the HEOs was observed. Due to the developed strategy, exclusively diketone-selective, recyclable, versatile heterogeneous catalytic transformation of aldehydes can be realized under mild reaction conditions.

Crystalline and amorphous aluminosilicates with different pore structures for the synthesis of pyridines

2017 ◽  
Vol 41 (5) ◽  
pp. 253-261 ◽  
Author(s):  
Nellya G. Grigor'eva ◽  
Nadezhda A. Filippova ◽  
Marat R. Agliullin ◽  
Boris I. Kutepov ◽  
Nama Narender
Keyword(s):  
Sol Gel ◽  
Catalytic Synthesis ◽  
Maximum Amount ◽  
Macroporous Structure ◽  
Acidic Properties ◽  
Mesoporous Aluminosilicates ◽  
Zeolite Framework ◽  
Narrow Pore Size Distribution ◽  
Heterogeneous Catalytic ◽  
Sol Gel Synthesis

The heterogeneous catalytic synthesis of pyridine and methylpyridines (picolines) was carried out by the reaction of ethanol with formaldehyde and ammonia over aluminosilicates with different acidic properties and textural characteristics: zeolite framework-type FAU in H-form with microporous (H-Y) and micro-meso-macroporous structure (H-Y-mmm) and mesoporous aluminosilicates, obtained by sol-gel synthesis in an alkaline medium (ASM-1) and under variable pH (ASM-2). It is shown that the highest catalytic activity is characteristic of ASM-2 (Si/Al = 40) with a narrow pore size distribution within the range 2 to 5 nm and containing strongly acidic bridging Si–OH–Al groups on the surface. The products of the reaction of ethanol with formaldehyde and ammonia on the catalysts studied are dominated by picolines; the maximum amount of picolines (60%) is formed on the H-Y-mmm and aluminosilicate ASM-2 samples.

Sol–Gel Synthesis of Spherical Mesoporous High-Entropy Oxides

2020 ◽  
Vol 12 (40) ◽  
pp. 45155-45164
Author(s):  
Gen Wang ◽  
Jing Qin ◽  
Youyou Feng ◽  
Bingxi Feng ◽  
Shengjiong Yang ◽  
...  
Keyword(s):  
Sol Gel ◽  
High Entropy ◽  
Sol Gel Synthesis

scholarly journals Synthesis of High-Purity Silica Nanoparticles by Sol-Gel Method

2017 ◽  
Vol 19 (4) ◽  
pp. 295 ◽  
Author(s):  
S.V. Lazareva ◽  
N.V. Shikina ◽  
L.E. Tatarova ◽  
Z.R. Ismagilov
Keyword(s):  
Particle Size ◽  
Sol Gel ◽  
Sio2 Content ◽  
Reaction Conditions ◽  
Minimum Particle Size ◽  
Size Stability ◽  
Different Temperatures ◽  
Acid Catalyzed ◽  
Silica Sols ◽  
Hydrolysis Of

Colloidal silica (silica sol) nanoparticles were synthesized by ammonia- and hydrochloric acid-catalyzed hydrolysis of tetraethoxysilane with subsequent condensation and polymerization. Silica particles with the size of 12‒160 nm were obtained at different temperatures and ratios of the initial reactants and studied by means of TEM, AFM, IR spectroscopy and zeta-potential measurements. The reaction conditions providing the minimum particle size in the final product of the most complete hydrolysis were determined. At pH above 8.5, an increase in the SiO2 content of the sol to 23 wt.% did not change the particle size. At a low (~ 1.8 wt.%) SiO2 content of the sol, a wide variation in pH also did not exert a significant effect on the particle size. Stability of the silica sols synthesized in an alkaline medium was enhanced by the replacement of alcohol with water during evaporation at pH 8.5‒9.5. The possibility to produce silica sols with the required characteristics (particle size, pH, stability, purity, and SiO2 content in an aqueous or alcohol medium) makes them applicable in various industries.

Inorganic-organic Hybrid Materials for Real 3-D Sub-νm Lithography

2003 ◽  
Vol 780 ◽  
Author(s):  
R. Houbertz ◽  
J. Schulz ◽  
L. Fröhlich ◽  
G. Domann ◽  
M. Popall ◽  
...  
Keyword(s):  
Femtosecond Laser ◽  
Sol Gel ◽  
Laser Pulses ◽  
Femtosecond Laser Pulses ◽  
Hybrid Polymer ◽  
Organic Hybrid ◽  
Two Photon ◽  
Applied Technology ◽  
Scale Structures ◽  
Sol Gel Synthesis

AbstractReal 3-D sub-νm lithography was performed with two-photon polymerization (2PP) using inorganic-organic hybrid polymer (ORMOCER®) resins. The hybrid polymers were synthesized by hydrolysis/polycondensation reactions (modified sol-gel synthesis) which allows one to tailor their material properties towards the respective applications, i.e., dielectrics, optics or passivation. Due to their photosensitive organic functionalities, ORMOCER®s can be patterned by conventional photo-lithography as well as by femtosecond laser pulses at 780 nm. This results in polymerized (solid) structures where the non-polymerized parts can be removed by conventional developers.ORMOCER® structures as small as 200 nm or even below were generated by 2PP of the resins using femtosecond laser pulses. It is demonstrated that ORMOCER®s have the potential to be used in components or devices built up by nm-scale structures such as, e.g., photonic crystals. Aspects of the materials in conjunction to the applied technology are discussed.

Sol-Gel Synthesis, Structure and Optical Properties of Nickel-Manganese Ferrites

2019 ◽  
Vol 11 (3) ◽  
pp. 03021-1-03021-5
Author(s):  
V. S. Bushkova ◽  
◽  
I. P. Yaremiy ◽  
B. K. Ostafiychuk ◽  
N. I. Riznychuk ◽  
...  
Keyword(s):  
Optical Properties ◽  
Sol Gel ◽  
Sol Gel Synthesis ◽  
Nickel Manganese

Naturally Occurring Organic Acid-catalyzed Facile Diastereoselective Synthesis of Biologically Active (E)-3-(arylimino)indolin-2-one Derivatives in Water at Room Temperature

2019 ◽  
Vol 23 (16) ◽  
pp. 1778-1788 ◽  
Author(s):  
Gurpreet Kaur ◽  
Arvind Singh ◽  
Kiran Bala ◽  
Mamta Devi ◽  
Anjana Kumari ◽  
...  
Keyword(s):  
Room Temperature ◽  
Biologically Active ◽  
Environmentally Benign ◽  
Diastereoselective Synthesis ◽  
Substituted Anilines ◽  
Reaction Conditions ◽  
Naturally Occurring ◽  
Acid Catalyzed ◽  
Reaction Media ◽  
Column Chromatographic

A simple, straightforward and efficient method has been developed for the synthesis of (E)-3-(arylimino)indolin-2-one derivatives and (E)-2-((4-methoxyphenyl)imino)- acenaphthylen-1(2H)-one. The synthesis of these biologically-significant scaffolds was achieved from the reactions of various substituted anilines and isatins or acenaphthaquinone, respectively, using commercially available, environmentally benign and naturally occurring organic acids such as mandelic acid or itaconic acid as catalyst in aqueous medium at room temperature. Mild reaction conditions, energy efficiency, good to excellent yields, environmentally benign conditions, easy isolation of products, no need of column chromatographic separation and the reusability of reaction media are some of the significant features of the present protocol.

Sol-Gel Synthesis of Nano-Scale, End-Member Albite Feldspar (NaAlSi3O8)

2021 ◽  
Author(s):  
L.M. Anovitz ◽  
A. Affolter ◽  
M.C. Cheshire ◽  
A.J. Rondinone ◽  
Lawrence F. Allard
Keyword(s):  
Sol Gel ◽  
Nano Scale ◽  
Sol Gel Synthesis

scholarly journals Aqueous Sol-Gel Synthesis of Different Iron Ferrites: From 3D to 2D

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1554
Author(s):  
Justinas Januskevicius ◽  
Zivile Stankeviciute ◽  
Dalis Baltrunas ◽  
Kęstutis Mažeika ◽  
Aldona Beganskiene ◽  
...  
Keyword(s):  
Magnetic Measurements ◽  
Substrate Surface ◽  
Sol Gel ◽  
Synthesis Method ◽  
Xrd Analysis ◽  
Dip Coating ◽  
Yttrium Iron ◽  
Iron Garnet ◽  
Dip Coating Technique ◽  
Sol Gel Synthesis

In this study, an aqueous sol-gel synthesis method and subsequent dip-coating technique were applied for the preparation of yttrium iron garnet (YIG), yttrium iron perovskite (YIP), and terbium iron perovskite (TIP) bulk and thin films. The monophasic highly crystalline different iron ferrite powders have been synthesized using this simple aqueous sol-gel process displaying the suitability of the method. In the next step, the same sol-gel solution was used for the fabrication of coatings on monocrystalline silicon (100) using a dip-coating procedure. This resulted, likely due to substrate surface influence, in all coatings having mixed phases of both garnet and perovskite. Thermogravimetric (TG) analysis of the precursor gels was carried out. All the samples were investigated by X-ray powder diffraction (XRD) analysis. The coatings were also investigated by scanning electron microscopy (SEM), atomic force microscopy (AFM) and Mössbauer spectroscopy. Magnetic measurements were also carried out.

Sign in / Sign up

Export Citation Format

Share Document