scholarly journals Nanomaterial Fabrication through the Modification of Sol–Gel Derived Coatings

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 181
Author(s):  
Wai Kian Tan ◽  
Hiroyuki Muto ◽  
Go Kawamura ◽  
Zainovia Lockman ◽  
Atsunori Matsuda
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Sol Gel ◽  
Materials Processing ◽  
Scale Production ◽  
Gel Method ◽  
Sol Gel Method ◽  
The Past ◽  
Large Scale Production ◽  
Gel Technique

In materials processing, the sol–gel method is one of the techniques that has enabled large-scale production at low cost in the past few decades. The versatility of the method has been proven as the fabrication of various materials ranging from metallic, inorganic, organic, and hybrid has been reported. In this review, a brief introduction of the sol–gel technique is provided and followed by a discussion of the significance of this method for materials processing and development leading to the creation of novel materials through sol–gel derived coatings. The controlled modification of sol–gel derived coatings and their respective applications are also described. Finally, current development and the outlook of the sol–gel method for the design and fabrication of nanomaterials in various fields are described. The emphasis is on the significant potential of the sol–gel method for the development of new, emerging technologies.

A Novel Sol-Gel Method for Large-Scale Production of Nanopowders: Preparation of Li1.5Al0.5Ti1.5(PO4)3as an Example

2015 ◽  
Vol 99 (2) ◽  
pp. 410-414 ◽  
Author(s):  
Qianli Ma ◽  
Qi Xu ◽  
Chih-Long Tsai ◽  
Frank Tietz ◽  
Olivier Guillon
Keyword(s):  
Large Scale ◽  
Sol Gel ◽  
Scale Production ◽  
Gel Method ◽  
Sol Gel Method ◽  
Large Scale Production

scholarly journals Thermoelectric Performance of Mechanically Mixed BixSb2-xTe3—ABS Composites

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1706
Author(s):  
Zacharias Viskadourakis ◽  
Argiri Drymiskianaki ◽  
Vassilis M. Papadakis ◽  
Ioanna Ioannou ◽  
Theodora Kyratsi ◽  
...  
Keyword(s):  
Polymer Composites ◽  
Large Scale ◽  
Low Cost ◽  
Acrylonitrile Butadiene Styrene ◽  
Thermoelectric Performance ◽  
Scale Production ◽  
Bismuth Antimony Telluride ◽  
Mechanical Mixing ◽  
Large Scale Production ◽  
Bi Doping

In the current study, polymer-based composites, consisting of Acrylonitrile Butadiene Styrene (ABS) and Bismuth Antimony Telluride (BixSb2−xTe3), were produced using mechanical mixing and hot pressing. These composites were investigated regarding their electrical resistivity and Seebeck coefficient, with respect to Bi doping and BixSb2-xTe3 loading into the composite. Experimental results showed that their thermoelectric performance is comparable—or even superior, in some cases—to reported thermoelectric polymer composites that have been produced using other complex techniques. Consequently, mechanically mixed polymer-based thermoelectric materials could be an efficient method for low-cost and large-scale production of polymer composites for potential thermoelectric applications.

scholarly journals Extensive Screening of Green Solvents for Safe and Sustainable UiO-66 Synthesis

2020 ◽  
Author(s):  
Diletta Morelli Venturi ◽  
Filippo Campana ◽  
Fabio Marmottini ◽  
Ferdinando Costantino ◽  
Luigi Vaccaro
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Metal Organic Framework ◽  
Dimethyl Formamide ◽  
Scale Production ◽  
Green Solvents ◽  
High Quality ◽  
Color Code ◽  
Large Scale Production ◽  
Metal Organic

<p>Zirconium based Metal-Organic Framework UiO-66 is to date considered one of the benchmark compound among stable MOFs and it has attracted a huge attention for its employment in many strategic applications. Large scale production of UiO-66 for industrial purposes requires the use of safe and green solvents, fulfilling the green chemistry principles and able to replace the use of <i>N,N</i>-Dimethyl-Formamide (DMF), which, despite its toxicity, is still considered the most efficient solvent for obtaining UiO-66 of high quality. Herein we report on a survey of about 40 different solvents with different polarity, boiling point and acidity, used for the laboratory scale synthesis of high quality UiO-66 crystals. The solvents were chosen according the European REACH Regulation 1907/2006 among those having low cost, low toxicity and fully biodegradable. Concerning MOF synthesis, the relevant parameters chosen for establishing the quality of the results obtained are the degree are the crystallinity, microporosity and specific surface area, yield and solvent recyclability. Taking into account also the chemical physical properties of all the solvents, a color code was assigned in order to give a final green assessment for the UiO-66 synthesis. Defectivity of the obtained products, the use of acidic modulators and the use of alternative Zr-salts have been also taken into consideration. Preliminary results lead to conclude that GVL (γ-valerolactone) is among the most promising solvents for replacing DMF in UiO-66 MOF synthesis. </p>

scholarly journals Low-cost Large Scale Vermicompost Unit

2021 ◽  
Vol 2115 (1) ◽  
pp. 012026
Author(s):  
Sonam Solanki ◽  
Gunendra Mahore
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Small Scale ◽  
Scale Production ◽  
Key Innovation ◽  
Main Challenge ◽  
Long Run ◽  
Large Scale Production ◽  
Term Maintenance

Abstract In the current process of producing vermicompost on a large-scale, the main challenge is to keep the worms alive. This is achieved by maintaining temperature and moisture in their living medium. It is a difficult task to maintain these parameters throughout the process. Currently, this is achieved by building infrastructure but this method requires a large initial investment and long-run maintenance. Also, these methods are limited to small-scale production. For large-scale production, a unit is developed which utilises natural airflow with water and automation. The main aim of this unit is to provide favourable conditions to worms in large-scale production with very low investment and minimum maintenance in long term. The key innovation of this research is that the technology used in the unit should be practical and easy to adopt by small farmers. For long-term maintenance of the technology lesser number of parts are used.

scholarly journals Extensive Screening of Green Solvents for Safe and Sustainable UiO-66 Synthesis

2020 ◽  
Author(s):  
Diletta Morelli Venturi ◽  
Filippo Campana ◽  
Fabio Marmottini ◽  
Ferdinando Costantino ◽  
Luigi Vaccaro
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Metal Organic Framework ◽  
Dimethyl Formamide ◽  
Scale Production ◽  
Green Solvents ◽  
High Quality ◽  
Color Code ◽  
Large Scale Production ◽  
Metal Organic

<p>Zirconium based Metal-Organic Framework UiO-66 is to date considered one of the benchmark compound among stable MOFs and it has attracted a huge attention for its employment in many strategic applications. Large scale production of UiO-66 for industrial purposes requires the use of safe and green solvents, fulfilling the green chemistry principles and able to replace the use of <i>N,N</i>-Dimethyl-Formamide (DMF), which, despite its toxicity, is still considered the most efficient solvent for obtaining UiO-66 of high quality. Herein we report on a survey of about 40 different solvents with different polarity, boiling point and acidity, used for the laboratory scale synthesis of high quality UiO-66 crystals. The solvents were chosen according the European REACH Regulation 1907/2006 among those having low cost, low toxicity and fully biodegradable. Concerning MOF synthesis, the relevant parameters chosen for establishing the quality of the results obtained are the degree are the crystallinity, microporosity and specific surface area, yield and solvent recyclability. Taking into account also the chemical physical properties of all the solvents, a color code was assigned in order to give a final green assessment for the UiO-66 synthesis. Defectivity of the obtained products, the use of acidic modulators and the use of alternative Zr-salts have been also taken into consideration. Preliminary results lead to conclude that GVL (γ-valerolactone) is among the most promising solvents for replacing DMF in UiO-66 MOF synthesis. </p>

scholarly journals Novel N-doped ZrO2 with enhanced visible-light photocatalytic activity for hydrogen production and degradation of organic dyes

RSC Advances ◽  
2018 ◽  
Vol 8 (13) ◽  
pp. 6752-6758 ◽  
Author(s):  
Yuanyang Wang ◽  
Yinghua Zhang ◽  
Haiqiang Lu ◽  
Yanxin Chen ◽  
Zhenmin Liu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Hydrogen Production ◽  
Visible Light ◽  
Nitrogen Source ◽  
Organic Dyes ◽  
Low Cost ◽  
Sol Gel ◽  
Gel Method ◽  
Sol Gel Method ◽  
Visible Light Photocatalytic

Two new types of N-doped ZrO2 photocatalysts ZON and AZON have been synthesized using ethylenediamine as the nitrogen source by a facile and low-cost sol–gel method.

Flexible self-powered textile formed by bridging photoactive and electrochemically active fiber electrodes

2019 ◽  
Vol 7 (24) ◽  
pp. 14447-14454 ◽  
Author(s):  
Zhen Gao ◽  
Peng Liu ◽  
Xuemei Fu ◽  
Limin Xu ◽  
Yong Zuo ◽  
...  
Keyword(s):  
Power Systems ◽  
Large Scale ◽  
Scale Production ◽  
The Past ◽  
Active Fiber ◽  
Large Scale Production ◽  
Electrochemically Active ◽  
Self Powered ◽  
Integrated Power Systems

By bridging photoactive and electrochemically active fibers via warp yarns using an industrial loom, we realized desirable continuous and large-scale production of self-powered textiles, which have remained challenging in the past decade. This work possibly represents a new advancement for flexible integrated power systems via weaving.

A Comparison of Different Preparation Methods of Fe-Mo-Mg-O Catalyst for the Large-Scale Synthesis of Carbon Nanotubes

2006 ◽  
Vol 510-511 ◽  
pp. 66-69 ◽  
Author(s):  
Yan Fang Chen ◽  
Yun Soo Lim
Keyword(s):  
Carbon Nanotubes ◽  
Large Scale ◽  
Sol Gel ◽  
High Yield ◽  
Preparation Methods ◽  
Gel Method ◽  
Sol Gel Method ◽  
Large Scale Synthesis ◽  
Synthesis Of Carbon Nanotubes ◽  
Reaction Routes

Carbon nanotubes (CNTs) in a high yield were synthesized by the decomposition of the methane gas with CCVD, in which two different reaction routes of sol-gel method prepared Fe-Mo- Mg-O catalyst. The two different routs influenced the wall number and defects of CNTs and the formation of CNTs. The concentration of Mo in the catalyst played a very important role in the yield of CNTs.

Sign in / Sign up

Export Citation Format

Share Document