scholarly journals A Finite Element Investigation into the Cohesive Properties of Glass-Fiber-Reinforced Polymers with Nanostructured Interphases

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2487
Author(s):  
Mohammad J. Ghasemi Parizi ◽  
Hossein Shahverdi ◽  
Ehsan Pipelzadeh ◽  
Andreu Cabot ◽  
Pablo Guardia
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Glass Fiber ◽  
Interfacial Shear Stress ◽  
Fiber Reinforced Polymers ◽  
Fe Model ◽  
Fiber Reinforced ◽  
Gfrp Composites ◽  
Pull Out ◽  
Glass Fiber Reinforced

Glass-fiber-reinforced polymer (GFRP) composites represent one of the most exploited composites due to their outstanding mechanical properties, light weight and ease of manufacture. However, one of the main limitations of GFRP composites is their weak inter-laminar properties. This leads to resin delamination and loss of mechanical properties. Here, a model based on finite element analysis (FEA) is introduced to predict the collective advantage that a GF surface modification has on the inter-laminar properties in GFRP composites. The developed model is validated with experimental pull-out tests performed on different samples. As such, modifications were introduced using different surface coatings. Interfacial shear stress (IFSS) for each sample as a function of the GF to polymer interphase was evaluated. Adhesion energy was found by assimilating the collected data into the model. The FE model reported here is a time-efficient and low-cost tool for the precise design of novel filler interphases in GFRP composites. This enables the further development of novel composites addressing delamination issues and the extension of their use in novel applications.

scholarly journals Buckling Analysis of Pultruded Glass Fiber Reinforced Polymer (GFRP) Angle Sections

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2532
Author(s):  
Rahima Shabeen Sirajudeen ◽  
Rajesh Sekar
Keyword(s):  
Glass Fiber ◽  
Slenderness Ratio ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced Polymers ◽  
Fe Model ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced Polymer ◽  
Buckling Mode ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced

Glass fiber reinforced polymers (GFRP), with their advantage of corrosion resistance, have potential to be used as structural members in civil engineering constructions. Pultruded GFRP angle section trusses could be used instead of steel sections in remote areas and in areas prone to corrosion. The objective of this paper is to study the strength of GFRP angle sections under concentric axial load. Glass fiber reinforced polymer (GFRP) made of E-glass and Isophthalic polyester resin and manufactured by pultrusion process was used for the experimental study. Two GFRP angle sections of size 50 × 50 × 6 mm and 50 × 50 × 4 mm and lengths 500 mm, 750 mm, and 1000 mm were chosen for the study. Further, finite experimental element analysis of the GFRP angle sections was done using ANSYS software and validated with the experimental results. The validated FE model was used for parametric studies varying the slenderness ratio and flange width to thickness ratio (b/t) ratio. It was observed that length of the specimen and thickness influenced the buckling load and buckling mode. An increase in b/t ratio from 8.3 to 12.5 decreases the load carrying capacity by almost 60% at a slenderness ratio of 50.

Mechanical properties of norbornene-based silane treated glass fiber reinforced polydicyclopentadiene composites manufactured by the S-RIM process

e-Polymers ◽  
2017 ◽  
Vol 17 (2) ◽  
pp. 159-166 ◽  
Author(s):  
Hyeong Min Yoo ◽  
Dong-Jun Kwon ◽  
Joung-Man Park ◽  
Sang Hyuk Yum ◽  
Woo Il Lee
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Glass Fibers ◽  
Process Conditions ◽  
Fiber Reinforced ◽  
Scanning Calorimetry ◽  
Reaction Injection Molding ◽  
Structural Reaction Injection Molding ◽  
Pull Out ◽  
Glass Fiber Reinforced

AbstractA lab scale structural reaction injection molding (S-RIM) piece of equipment was designed and used to fabricate glass fiber reinforced polydicyclopentadiene (p-DCPD) composites for three different fiber contents. In order to obtain information regarding the optimal process temperature (>80°C) and the curing time (<30 s), differential scanning calorimetry (DSC) was used to investigate the curing behavior of DCPD resin under isothermal conditions. Further, a norbornene-based silane treatment was used to improve the interfacial adhesion between the glass fibers and DCPD as confirmed by the micro-droplet pull-out test and scanning electron microscopy (SEM). Fabrication of glass fiber/p-DCPD composites with improved mechanical properties was carried out based on the optimized process conditions and surface treatment of glass fiber.

scholarly journals Effect of Sea Water Environment Exposure on Glass Fiber Reinforced Polymer Composites

2019 ◽  
Vol 9 (1) ◽  
pp. 670-674
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Mechanical Behaviour ◽  
Sea Water ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Gfrp Composites ◽  
Glass Fiber Reinforced Polymer ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced

Glass fiber reinforced polymer(GFRP) composites are currently used in large numbers of diverse applications ranging from tip and engine strut fairings in aircrafts, building panels and dash boards in automotive vehicles, boat hulls in ocean vehicle structures, golf clubs and race helmets in sports equipment, etc. The service life of composite materials are influenced by the different adverse environment which leads to various failures like corrosion, fatigue, fracture, etc., results in loss of structural integrity due to environmental conditions. The investigations involved are to study the mechanical behaviour of these materials when subjected to various adverse conditions of the environment at different intervals of exposure due to change in moisture and temperature. Experiments were conducted on GFRP composites with and without exposing to different environment conditions of sea water. Tensile and flexural tests are conducted to predict the mechanical behaviour of both normal specimens and specimens exposed with sea water. Reduction in mechanical properties found due to maximum absorption of any liquid by the material. When temperature increases better in mechanical properties are noticed and at low temperature the composite behaves like a brittle.

Improving Mechanical Properties of Glass Fiber Reinforced Polymers through Silica-Based Surface Nanoengineering

2020 ◽  
Vol 2 (7) ◽  
pp. 2667-2675
Author(s):  
Mohammad J. Ghasemi Parizi ◽  
Hossein Shahverdi ◽  
Joan Josep Roa ◽  
Ehsan Pipelzadeh ◽  
Monica Martinez ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Fiber Reinforced Polymers ◽  
Fiber Reinforced ◽  
Reinforced Polymers ◽  
Glass Fiber Reinforced Polymers ◽  
Glass Fiber Reinforced

Preparation and Characterization of TiO2 Particulate Filled Polyester Based Glass Fiber Reinforced Polymer Composite

2014 ◽  
Vol 984-985 ◽  
pp. 360-366 ◽  
Author(s):  
S. Srinivasa Moorthy ◽  
K. Manonmani ◽  
M. Sankar Kumar
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Chemical Resistance ◽  
Fiber Content ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Gfrp Composites ◽  
Glass Fiber Reinforced Polymer ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced

Polyester based glass fiber reinforced polymer (GFRP) composites are widely used in marine and automotive industries because of its strength to weight ratio with lower price. In order to have the better properties of GFRP composites, the particulate filler material titanium oxide (TiO2) was added in unsaturated polyester resin with the fiber reinforcement by hand lay-up process. The fiber content was kept at 35 wt% constant with the fiber length of 5 cm. The particulate was varied with 2 wt. %, 4 wt. %, 6 wt. %, 8 wt. %, and 10 wt. %. Experiments were carried out to study the mechanical properties like tensile strength, impact strength, and Rockwell hardness. The chemical resistance analysis (CRA) was carried out by weight loss method. The mechanical properties of the hybrid reinforced composites were improved due to the fiber content with increased particulate content. The influence of the particulate content was more pronounced in the chemical resistance.

scholarly journals Mechanical Properties of Lab Joint Composite Structure of Glass Fiber Reinforced Polymers

2017 ◽  
Vol 08 (07) ◽  
pp. 553-565
Author(s):  
Mohammed Y. Abdellah ◽  
Mohamed Q. Kamal ◽  
Mohammad S. Alsoufi ◽  
Nouby M. Ghazaly ◽  
G. T. Abdel-Jaber
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Composite Structure ◽  
Fiber Reinforced Polymers ◽  
Fiber Reinforced ◽  
Reinforced Polymers ◽  
Glass Fiber Reinforced Polymers ◽  
Glass Fiber Reinforced

scholarly journals Experimental Investigation on Mechanical Properties of A/GFRP, B/GFRP and AB/GFRP Polymer Composites

2022 ◽  
Vol 58 (4) ◽  
pp. 28-36
Author(s):  
Velmurugan Natarajan ◽  
Ravi Samraj ◽  
Jayabalakrishnan Duraivelu ◽  
Prabhu Paulraj
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Flexural Strength ◽  
Glass Fiber ◽  
Polymer Composites ◽  
Fiber Reinforced ◽  
Gfrp Composites ◽  
Glass Fiber Reinforced ◽  
Structural Applications ◽  
Polyester Composites

This study aims to reveal the consequence of thickness reinforcement on Fiber Laminates (Polyester Resin, Glass Fiber, Aluminum, and Bentonite) and to see if it can enhance the mechanical properties and resistance of laminates. Glass fiber reinforced polymer composites have recently been used in automotive, aerospace, and structural applications where they will be safe for the application s unique shape. Hand layup was used to fabricate three different combinations, including Aluminium /Glass fiber reinforced polyester composites (A/GFRP), Bentonite/Glass fiber reinforced polyester composites (B/GFRP), and Aluminium&Bentonie/Glass fiber reinforced polyester composites (AB/GFRP). Results revealed that AB/GFRP had better tensile strength, flexural strength, and hardness than GFRP and A/GFRP. Under normal atmospheric conditions and after exposure to boiling water, hybrid Aluminium&Bentonite and glass fiber-reinforced nanocomposites have improved mechanical properties than other hybrid composites. After exposure to temperature, the flexural strength, tensile strength and stiffness of AB/GFRP Composites are 40 % higher than A/GFRP and 17.44% higher than B/GFRP Composites.

scholarly journals Weibull Probabilistic Model of Moisture Concentration Build Up in a Fiber Graphite/Epoxy Polymer Composite under Varying Hydrothermal Conditions

2020 ◽  
Vol 65 (1) ◽  
pp. 27-37
Author(s):  
Boucham Belhadj ◽  
Lousdad Abdelkader ◽  
Alaa Chateauneuf
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Composite Structures ◽  
Moisture Absorption ◽  
Environmental Control ◽  
Fiber Reinforced Polymers ◽  
Fiber Reinforced ◽  
Hydrothermal Conditions ◽  
Glass Fiber Reinforced ◽  
Structural Applications

Advanced mechanical and structural applications require accurate assessment and better knowledge of the damage state during elaboration and service. The development of life prediction methodologies for Glass Fiber Reinforced Polymers (GFRPs) has increased with the use of composites in different industries. It is important to develop through thickness degradation analyses due to ageing in order to predict its effect on the lifetime of composite structures. This study aims to model the moisture absorption, the concentration of the absorbed fluid and the reduction of mechanical properties in the through the thickness direction of a GFRPs structure. The water absorption behavior of woven glass fiber reinforced cyanate ester composites used in the plenum of the air conditioning pack of aircraft environmental control system has been modeled. The combined models describe the diffusion procedure primarily at material level and continuously at structure level. The amount of the absorbed moisture can be crucial for the mechanical behavior of the structure. Therefore, there is a need for a better understanding of the evolution of mechanical properties during ageing. The procedure utilizes the results of the diffusion model to calculate the moduli degradation during the water uptake process. Predictive models have been proposed by considering different sections throughout the thickness and provide a solid background for modeling the long term behavior of a structure exposed at different temperature and different time period. This work performed the numerical studies on the effect of moisture, temperature and presents some useful instructions for the evaluation of such composite structures.

Sign in / Sign up

Export Citation Format

Share Document