scholarly journals Experimental Investigation on Mechanical Properties of A/GFRP, B/GFRP and AB/GFRP Polymer Composites

2022 ◽  
Vol 58 (4) ◽  
pp. 28-36
Author(s):  
Velmurugan Natarajan ◽  
Ravi Samraj ◽  
Jayabalakrishnan Duraivelu ◽  
Prabhu Paulraj
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Flexural Strength ◽  
Glass Fiber ◽  
Polymer Composites ◽  
Fiber Reinforced ◽  
Gfrp Composites ◽  
Glass Fiber Reinforced ◽  
Structural Applications ◽  
Polyester Composites

This study aims to reveal the consequence of thickness reinforcement on Fiber Laminates (Polyester Resin, Glass Fiber, Aluminum, and Bentonite) and to see if it can enhance the mechanical properties and resistance of laminates. Glass fiber reinforced polymer composites have recently been used in automotive, aerospace, and structural applications where they will be safe for the application s unique shape. Hand layup was used to fabricate three different combinations, including Aluminium /Glass fiber reinforced polyester composites (A/GFRP), Bentonite/Glass fiber reinforced polyester composites (B/GFRP), and Aluminium&Bentonie/Glass fiber reinforced polyester composites (AB/GFRP). Results revealed that AB/GFRP had better tensile strength, flexural strength, and hardness than GFRP and A/GFRP. Under normal atmospheric conditions and after exposure to boiling water, hybrid Aluminium&Bentonite and glass fiber-reinforced nanocomposites have improved mechanical properties than other hybrid composites. After exposure to temperature, the flexural strength, tensile strength and stiffness of AB/GFRP Composites are 40 % higher than A/GFRP and 17.44% higher than B/GFRP Composites.

scholarly journals Influence of Stacking Sequence on the Mechanical and Dynamic Mechanical Properties of Cotton/Glass Fiber Reinforced Polyester Composites

2016 ◽  
Vol 19 (3) ◽  
pp. 542-547 ◽  
Author(s):  
Emanoel Henrique Portella ◽  
Daiane Romanzini ◽  
Clarissa Coussirat Angrizani ◽  
Sandro Campos Amico ◽  
Ademir José Zattera
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Dynamic Mechanical Properties ◽  
Stacking Sequence ◽  
Fiber Reinforced ◽  
Dynamic Mechanical ◽  
Glass Fiber Reinforced ◽  
Polyester Composites

Experiment Investigation on Mechanical Property of Glass Fiber Reinforced Concrete

2014 ◽  
Vol 915-916 ◽  
pp. 784-787
Author(s):  
Yan Lv
Keyword(s):  
Tensile Strength ◽  
Reinforced Concrete ◽  
Flexural Strength ◽  
Glass Fiber ◽  
Volume Fraction ◽  
Plain Concrete ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Glass Fiber Reinforced

Based on the mechanical properties experiment of the glass fiber reinforced concrete with 0%0.6%0.8% and 1% glass fiber volume fraction, the mechanics property such as tensile strength, compressive strength, flexural strength and flexural elasticity modulus are analyzed and compared with the plain concrete when the kinds of fiber content changes. The research results show that the effect of tensile strength and flexural strength can be improved to some extent, which also can serve as a reference or basis for further improvement and development the theory and application of the glass fiber reinforced concrete.

Effects of nano-SiO2 on mechanical and hygric behaviors of glass fiber reinforced epoxy composites

2018 ◽  
Vol 25 (2) ◽  
pp. 253-259 ◽  
Author(s):  
Jinshui Yang ◽  
Chunqi Wang ◽  
Jingcheng Zeng ◽  
Dazhi Jiang
Keyword(s):  
Flexural Strength ◽  
Glass Fiber ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Gfrp Composites ◽  
Molding Process ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Hygric Properties ◽  
Interlaminar Shear

AbstractThe unmodified and nano-SiO2modified glass fiber reinforced polymer (GFRP) composites were prepared by the hot-compression molding process to investigate the effects of nano-SiO2on the mechanical and hygric properties of the GFRP composites. The results indicate that the nano-SiO2modification results in an increase of 9.7% and 7.9% in the tensile and flexural strength of the GFRP composites, and a decrease of 10.6% in the interlaminar shear strength (ILSS). The maximum swelling of the unmodified GFRP is 2.6 times as that of the nano-SiO2modified GFRP. The normalized-ILSS decrease of the nano-SiO2modified GFRP is only 12% after 138 days aging, while that of the GFRP reaches 31%. After 95-days hygric-aging, the decrease of the normalized flexural strength is 15.3% for the GFRP, while the normalized flexural strength of the nano-SiO2modified GFRP still maintains an increase of 5.0%. It is concluded that the nano-SiO2particle could improve the mechanical and hygric properties of the GFRP composites.

Thermal Shock Effect of Nano-TiO2 Enhanced Glass Fiber Reinforced Polymeric Composites: An Assessment on Tensile and Thermal Behavior

2020 ◽  
Vol 978 ◽  
pp. 277-283
Author(s):  
Kishore Kumar Mahato ◽  
Krishna Chaitanya Nuli ◽  
Krishna Dutta ◽  
Rajesh Kumar Prusty ◽  
Bankim Chandra Ray
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Glass Fiber ◽  
Thermal Shock ◽  
Viscoelastic Behavior ◽  
Stress Transfer ◽  
Tensile Tests ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced ◽  
Service Period

Fiber reinforced polymeric (FRP) composite materials are currently used in numerous structural and materials related applications. But, during their in-service period these composites were exposed to different changing environmental conditions. Present investigation is planned to explore the effect of thermal shock exposure on the mechanical properties of nanoTiO2 enhanced glass fiber reinforced polymeric (GFRP) composites. The samples were conditioned at +70°C temperature for 36 h followed by further conditioning at – 60°C temperature for the similar interval of time. In order to estimate the thermal shock influence on the mechanical properties, tensile tests of the conditioned samples were carried out at 1 mm/min loading rate. The polymer phase i.e. epoxy was modified with different nanoTiO2 content (i.e. 0.1, 0.3 and 0.5 wt. %). The tensile strength of 0.1 wt.% nanoTiO2 GFRP filled composites exhibited higher ultimate tensile strength (UTS) among all other composites. The possible reason may be attributed to the good dispersion of nanoparticles in polymer matrix corresponds to proper stress transfer during thermal shock conditioning. In order to access the variations in the viscoelastic behavior and glass transition temperature due to the addition of nanoTiO2 in GFRP composite and also due to the thermal shock conditioning, dynamic mechanical thermal analysis (DMTA) measurements were carried out. Different modes of failures and strengthening morphology in the composites were analyzed under scanning electron microscope (SEM).

scholarly journals Effect of Sea Water Environment Exposure on Glass Fiber Reinforced Polymer Composites

2019 ◽  
Vol 9 (1) ◽  
pp. 670-674
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Mechanical Behaviour ◽  
Sea Water ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Gfrp Composites ◽  
Glass Fiber Reinforced Polymer ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced

Glass fiber reinforced polymer(GFRP) composites are currently used in large numbers of diverse applications ranging from tip and engine strut fairings in aircrafts, building panels and dash boards in automotive vehicles, boat hulls in ocean vehicle structures, golf clubs and race helmets in sports equipment, etc. The service life of composite materials are influenced by the different adverse environment which leads to various failures like corrosion, fatigue, fracture, etc., results in loss of structural integrity due to environmental conditions. The investigations involved are to study the mechanical behaviour of these materials when subjected to various adverse conditions of the environment at different intervals of exposure due to change in moisture and temperature. Experiments were conducted on GFRP composites with and without exposing to different environment conditions of sea water. Tensile and flexural tests are conducted to predict the mechanical behaviour of both normal specimens and specimens exposed with sea water. Reduction in mechanical properties found due to maximum absorption of any liquid by the material. When temperature increases better in mechanical properties are noticed and at low temperature the composite behaves like a brittle.

Application of Glass Fiber Reinforced Composite Materials in Construction Engineering

2020 ◽  
Vol 852 ◽  
pp. 199-208
Author(s):  
Yan Li Chen ◽  
Satoshk Ueharo
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Glass Fiber ◽  
Mineral Admixtures ◽  
Cement Matrix ◽  
Fiber Reinforced ◽  
Construction Engineering ◽  
Alkaline Environment ◽  
Glass Fiber Reinforced ◽  
Building Engineering

Glass fiber reinforced cement (GRC) is a new type of composite material formed by using alkali-resistant glass fiber as a reinforcing material and cement paste or cement mortar as a matrix. GRC is widely used in construction engineering. However, the durability of GRC is still a major problem in engineering applications, especially GRC materials have been in the hot and humid building engineering environment for a long time. The alkaline environment of the cement matrix will cause serious erosion of the glass fiber, and Will significantly reduce the mechanical properties such as flexural strength and toughness of GRC. In this paper, ordinary Portland cement is mixed with active mineral admixtures such as fly ash and silica fume to reduce the alkaline environment of GRC matrix, and to delay the erosion rate of glass fiber and increase the flexural strength and compressive strength of GRC; At the same time, the effects of different hot and humid building engineering environments on the mechanical properties of GRC were studied.

Sign in / Sign up

Export Citation Format

Share Document