scholarly journals Nose to Brain Delivery of Phenytoin Sodium Loaded Nano Lipid Carriers: Formulation, Drug Release, Permeation and In Vivo Pharmacokinetic Studies

Pharmaceutics ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1640
Author(s):  
Sreeja C. Nair ◽  
Kollencheri Puthenveettil Vinayan ◽  
Sabitha Mangalathillam
Keyword(s):  
Drug Release ◽  
Olfactory Epithelium ◽  
Drug Transport ◽  
Ex Vivo ◽  
Medical Attention ◽  
Pharmacokinetic Studies ◽  
Phenytoin Sodium ◽  
Drug Solution

An acute epileptic seizure is a seizure emergency fatal condition that requires immediate medical attention. IV phenytoin sodium remains the second line therapeutic agent for the immediate treatment of status epilepticus. Phenytoin sodium formulated as nanolipid carriers (NLCs) seems to be promising as an intranasal delivery system for controlling acute seizures. Three different nanosized phenytoin sodium loaded NLCs (<50 nm, 50–100 nm and >100 nm) were prepared by melt emulsification and was further characterised. In vitro drug release studies showed immediate drug release from phenytoin sodium loaded NLCs of <50 nm size, which is highly essential for acute seizure control. The ex vivo permeation study indicated greater permeation from <50 nm sized NLC through the olfactory epithelium compared to thecontrol drug solution. Invivo pharmacokinetic studies revealed higher drug concentration in CSF/brain within 5 min upon intranasal administration of <50 nm sized phenytoin sodium NLCs than the control drug solution and marketed IV phenytoin sodium, indicating direct and rapid nose to brain drug transport through the olfactory epithelium. The study has shown that formulation strategies can enhance olfactory uptake, and phenytoin sodium NLCs of desired particle sizes (<50 nm) offer promising potential for nose to brain direct delivery of phenytoin sodium in treating acute epileptic seizures.

scholarly journals Development and In Vitro-In Vivo Evaluation of a Novel Sustained-Release Loxoprofen Pellet with Double Coating Layer

Pharmaceutics ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 260 ◽  
Author(s):  
Dongwei Wan ◽  
Min Zhao ◽  
Jingjing Zhang ◽  
Libiao Luan
Keyword(s):  
Citric Acid ◽  
Drug Release ◽  
Sustained Release ◽  
Release Rate ◽  
Diffusion Rate ◽  
Immediate Release ◽  
Pharmacokinetic Studies ◽  
Release Tablet

This study aimed to develop a novel sustained release pellet of loxoprofen sodium (LXP) by coating a dissolution-rate controlling sub-layer containing hydroxypropyl methyl cellulose (HPMC) and citric acid, and a second diffusion-rate controlling layer containing aqueous dispersion of ethyl cellulose (ADEC) on the surface of a LXP conventional pellet, and to compare its performance in vivo with an immediate release tablet (Loxinon®). A three-level, three-factor Box-Behnken design and the response surface model (RSM) were used to investigate and optimize the effects of the citric acid content in the sub-layer, the sub-layer coating level, and the outer ADEC coating level on the in vitro release profiles of LXP sustained release pellets. The pharmacokinetic studies of the optimal sustained release pellets were performed in fasted beagle dogs using an immediate release tablet as a reference. The results illustrated that both the citric acid (CA) and ADEC as the dissolution- and diffusion-rate controlling materials significantly decreased the drug release rate. The optimal formulation showed a pH-independent drug release in media at pH above 4.5 and a slightly slow release in acid medium. The pharmacokinetic studies revealed that a more stable and prolonged plasma drug concentration profile of the optimal pellets was achieved, with a relative bioavaibility of 87.16% compared with the conventional tablets. This article provided a novel concept of two-step control of the release rate of LXP, which showed a sustained release both in vitro and in vivo.

Synthesis and characterization of Chitosan-Catechol conjugates: Development and in vitro, in silico and in vivo evaluation of mucoadhesive pellets of lafutidine

2021 ◽  
pp. 088391152199784
Author(s):  
Loveleen Kaur ◽  
Ajay Kumar Thakur ◽  
Pradeep Kumar ◽  
Inderbir Singh
Keyword(s):  
Drug Release ◽  
In Silico ◽  
Ex Vivo ◽  
Strong Interactions ◽  
Dissolution Time ◽  
Sem Images ◽  
In Vivo Evaluation ◽  
Release Studies

Present study was aimed to synthesize and characterize Chitosan-Catechol conjugates and to design and develop mucoadhesive pellets loaded with lafutidine. SEM images indicated the presence of fibrous structures responsible for enhanced mucoadhesive potential of Chitosan-Catechol conjugates. Thermodynamic stability and amorphous nature of conjugates was confirmed by DSC and XRD studies respectively. Rheological studies were used to evaluate polymer mucin interactions wherein strong interactions between Chitosan-Catechol conjugate and mucin was observed in comparison to pristine chitosan and mucin. The mucoadhesion potential of Chitosan-Catechol (Cht-C) versus Chitosan (Cht) was assessed in silico using molecular mechanics simulations and the results obtained were compared with the in vitro and ex vivo results. Cht-C/mucin demonstrated much higher energy stabilization (∆E ≈ −65 kcal/mol) as compared to Cht/mucin molecular complex. Lafutidine-loaded pellets were prepared from Chitosan (LPC) and Chitosan-Catechol conjugates (LPCC) and were evaluated for various physical properties viz. flow, circularity, roundness, friability, drug content, particle size and percent mucoadhesion. In vitro drug release studies on LPC and LPCC pellets were performed for computing t50%, t90% and mean dissolution time. The values of release exponent from Korsmeyer-Peppas model was reported to be 0.443 and 0.759 for LPC and LPCC pellets suggesting Fickian and non-Fickian mechanism representing drug release, respectively. In vivo results depicted significant controlled release and enhanced residence of the drug after being released from the chitosan-catechol coated pellets. Chitosan-Catechol conjugates were found to be a promising biooadhesive polymer for the development of various mucoadhesive formulations.

scholarly journals Design and Characterization of Combinational Domperidone-Famotidine Floating Drug Delivery System - In vitro and In vivo studies

2021 ◽  
Vol 62 (2) ◽  
pp. 144-162
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Oral Administration ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Introduction: The drawbacks assosiated with oral administration of drugscan be controlled or minimized by gastro retentive formulations that remain buoyant within the stomach for an extended time by providing prolonged gastric retention and releasethe drug in an exceedingly extended manner thereby improving bioavailability. The current research was to develop and optimize Domperidone and Famotidine floating tablets with extended release by Quality by Design approach. Method: Based on QTPP (Quality Target Product Profile), CQAs (Critical Quality Attributes)wereidentified. Risk analysis by the evaluation of formulation and process parameters showed that optimizing the levels of polymers could reduce high risk to achieve the target profile. A 23factor experimental design with midpoints was selected for statistical analysis and optimization. Results: HPMC K100 and Carbopol 934P had a positive effect while ethyl cellulose demonstrated a negative effect on the selected responses. Drug release kinetics followed the first-order release with Higuchi diffusion and Fickian diffusion. Optimized formula satisfying all the required parameters was selected and evaluated. The predicted response values were in close agreement with experimental response values. Abdominal X-ray imaging after oral administration of the tablets on a healthy rabbit’s stomach confirmed the extended floating behavior with shorter lag time. In vivo, pharmacokinetic studies in rabbits revealed that the optimized formulation exhibited prolonged drug release with enhanced Cmax, tmax, AUCo-t, and t1/2 of an optimized product when compared to the marketed product. Conclusions: It has been concluded that the application of Quality by Design in the formulation and optimization reduced the number of trials to produce a cost-effective formula.

Quality by Design enabled anti-hypertensive Floating drug delivery system by Risk assessment and Design of Experiment (DoE) – In vitro – In vivo correlation studies

2021 ◽  
Vol 16 ◽  
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Risk Analysis ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Background: The present research aimed to develop and optimize extended-release floating tablets of Sacubitril and Valsartan through Quality by Design (QbD) approach. Risk analysis by formulation assessment and process parameters showed that optimizing the levels of the polymer will minimize high risk to meet the target profile. A two (2) level three (3) full factorial experimental design along with midpoints was carefully chosen for optimization and statistical analysis. Based on the literature, the independent and dependent variables were selected. Results: HPMC K100, Carbopol 934P had a positive effect, whereas Ethylcellulose had a negative effect on Floating time, drug release at 2 h, drug release at 12 h and, 50% responses. Drug release kinetics followed the first-order release with Higuchi and Fickian diffusion. Contour and overlay plots were utilized for an assortment of design space and optimized formula. ANOVA results of all the factors exhibited significance at p<0.05. Abdominal X-ray imaging of the optimized tablets on healthy rabbit’s stomach confirmed the floating behavior for more than 12 h. In vivo pharmacokinetic studies in rabbits showed that the optimized formulation exhibited prolonged and extended drug release with improved Cmax, tmax, AUCo-t, and t1/2 of test product when compared to marketed product. IVIVC model was developed by using dissolution data of in vitro and pharmacokinetics data of in-vivo by de-convolution method (Wagner-Nelson method). Conclusion: The Quality by Design implementation in the formulation and optimization abridged the number of trials to produce a cost-effective formula. In vivo studies confirmed that the formula was successfully developed with extended floating time (12 h) and drug release by risk analysis and experimental designs. Level A correlation was observed which confirmed a good correlation between in vitro and in vivo data.

scholarly journals Nanostructured Lipid Carrier Gel for the Dermal Application of Lidocaine: Comparison of Skin Penetration Testing Methods

Pharmaceutics ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 310 ◽  
Author(s):  
Stella Zsikó ◽  
Kendra Cutcher ◽  
Anita Kovács ◽  
Mária Budai-Szűcs ◽  
Attila Gácsi ◽  
...  
Keyword(s):  
Drug Release ◽  
Human Skin ◽  
Ex Vivo ◽  
Study Drug ◽  
Skin Penetration ◽  
Human Epidermis ◽  
Nanostructured Lipid Carrier ◽  
Experimental Findings

The aim of this research was to investigate the stability of a lidocaine-loaded nanostructured lipid carrier dispersion at different temperatures, formulate a nanostructured lipid carrier gel, and test the penetration profile of lidocaine from the nanostructured lipid carrier gel using different skin penetration modeling methods. The formulations were characterized by laser diffraction, rheological measurements and microscopic examinations. Various in vitro methods were used to study drug release, diffusion and penetration. Two types of vertical Franz diffusion cells with three different membranes, including cellulose, Strat-M®, and heat separated human epidermis were used and compared to the Skin-parallel artificial membrane permeability assay (PAMPA) method. Results indicated that the nanostructured lipid carrier dispersion had to be gelified as soon as possible for proper stability. Both the Skin-PAMPA model and Strat-M® membranes correlated favorably with heat separated human epidermis in this research, with the Strat-M® membranes sharing the most similar drug permeability profile to an ex vivo human skin model. Our experimental findings suggest that even when the best available in vitro experiment is selected for modeling human skin penetration to study nanostructured lipid carrier gel systems, relevant in vitro/in vivo correlation should be made to calculate the drug release/permeation in vivo. Future investigations in this field are still needed to demonstrate the influence of membranes and equipment from other classes on other drug candidates.

scholarly journals Development and Optimization of Proniosomal Gel Containing Etodolac: In-vitro, Ex-vivo and In-vivo Evaluation

2021 ◽  
Vol 62 (3) ◽  
pp. 290-304
Author(s):  
Moreshwar Patil ◽  
Prashant Pandit ◽  
Pavan Udavant ◽  
Sandeep Sonawane ◽  
Deepak Bhambere
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Ex Vivo ◽  
Entrapment Efficiency ◽  
In Vivo Evaluation ◽  
Vesicle Size ◽  
Skin Delivery ◽  
The Stability

Introduction: Etodolac is used in the treatment of acute pain and inflammation. It has low solubility because of high hydrophobicity and it is reported that upon oral administration shows gastric disturbances. This encourages the development of topical vesicular formulation. Method: In this work we used coacervation-phase separation method for the development of etodolac loaded vesicular system by using non-ionic surfactants, cholesterol and soya lecithin. Central composite design (rotatble) was used to optimize the concentrations of soy lecithin, surfactant and cholesterol. The prepared formulations were characterized by number of vesicles formed, vesicle size, zeta potential, entrapment efficiency, in-vitro permeation, ex-vivo permeation and anti-inflammatory study. Results: Etodolac was successfully entrapped in all formulations having efficiency in the range of 74.36% to 90.85%, which was more at 4 °C than room temperature. When hydrated with water; niosome in the range of 54 to 141 (per cubic mm) were spontaneously produced. The results of in-vitro diffusion study revealed that etodolac was released in the range of 71.86 to 97.16% over a period of 24 hrs. The average vesicle size of optimized formulation was found 211.9 nm with PDI of 0.5. The observed responses i.e. % encapsulation efficiency and drug release were 74.12 and 95.08 respectively. The zeta potential was -19.4mV revealed the stability of formulation which was further confirmed by no changes in drug content and drug release after stability studies. The % inhibition in paw volume was 40.52% and 43.61% for test and marketed proniosomal gel. Conclusion: Proniosomal gel formulation was stable and could enhance skin delivery of etodolac because of excellent permeation capability of vesicular system.

scholarly journals OPTIMIZATION OF STATISTICALLY DESIGNED ACECLOFENAC FAST DISSOLVING TABLETS EMPLOYING STARCH GLUTAMATE AS A NOVEL SUPERDISINTEGRANT

2019 ◽  
pp. 77-88
Author(s):  
R. SANTOSH KUMAR ◽  
SAHITHI MUDILI
Keyword(s):  
Drug Release ◽  
Peak Plasma ◽  
Peak Plasma Concentration ◽  
In Vitro Dissolution ◽  
Pharmacokinetic Studies ◽  
Disintegration Time ◽  
Short Period ◽  
Dissolution Efficiency

Objective: To optimize aceclofenac fast dissolving tablets employing starch glutamate as novel superdisintegrant by 23factorial design to improve bioavailability and enhance patient compliance. Methods: Starch glutamate was prepared by the esterification process. Starch glutamate physical and micromeritics properties had been evaluated and the prepared starch glutamate was used as a superdisintegrant for the formulation of the fast dissolving tablets of aceclofenac by direct compression method and optimized by employing 23factorial design. The prepared aceclofenac fast dissolving tablets were evaluated for post compression parameters as well as in vitro and in vivo release characteristics. Optimized formulation stability studies were performed at accelerated conditions for 6 mo as per ICH and WHO guidelines. Results: The prepared starch glutamate was amorphous, insoluble in aqueous and organic solvents were tested. Fast dissolving tablets of aceclofenac were formulated by employing starch glutamate as a superdisintegrant showed good tablet properties and showed an increased dissolution efficiency of the drug. Among all the formulations (F1 to F8), the formulation F8 containing 5% concentration of starch glutamate, croscarmellose sodium and, crospovidone as a superdisintegrants showed 99.7±0.15% of drug release within 5 min. Whereas the formulation F2 containing 5% concentration of starch glutamate, drug release characters were comparable to the formulation F8. Optimized formulation F2 attained peak plasma concentration within a short period and showed increased relative bioavailability of the drug. Conclusion: From the physical properties, disintegration time, in vitro dissolution studies and pharmacokinetic studies, it was concluded that fast dissolving tablets of aceclofenac tablets formulated by employing starch glutamate as a superdisintegrant enhanced the dissolution efficiency and improved the bioavailability of the drug as compared to the pure drug and stable.

Sign in / Sign up

Export Citation Format

Share Document