scholarly journals OPTIMIZATION OF STATISTICALLY DESIGNED ACECLOFENAC FAST DISSOLVING TABLETS EMPLOYING STARCH GLUTAMATE AS A NOVEL SUPERDISINTEGRANT

2019 ◽  
pp. 77-88
Author(s):  
R. SANTOSH KUMAR ◽  
SAHITHI MUDILI
Keyword(s):  
Drug Release ◽  
Peak Plasma ◽  
Peak Plasma Concentration ◽  
In Vitro Dissolution ◽  
Pharmacokinetic Studies ◽  
Disintegration Time ◽  
Short Period ◽  
Dissolution Efficiency

Objective: To optimize aceclofenac fast dissolving tablets employing starch glutamate as novel superdisintegrant by 23factorial design to improve bioavailability and enhance patient compliance. Methods: Starch glutamate was prepared by the esterification process. Starch glutamate physical and micromeritics properties had been evaluated and the prepared starch glutamate was used as a superdisintegrant for the formulation of the fast dissolving tablets of aceclofenac by direct compression method and optimized by employing 23factorial design. The prepared aceclofenac fast dissolving tablets were evaluated for post compression parameters as well as in vitro and in vivo release characteristics. Optimized formulation stability studies were performed at accelerated conditions for 6 mo as per ICH and WHO guidelines. Results: The prepared starch glutamate was amorphous, insoluble in aqueous and organic solvents were tested. Fast dissolving tablets of aceclofenac were formulated by employing starch glutamate as a superdisintegrant showed good tablet properties and showed an increased dissolution efficiency of the drug. Among all the formulations (F1 to F8), the formulation F8 containing 5% concentration of starch glutamate, croscarmellose sodium and, crospovidone as a superdisintegrants showed 99.7±0.15% of drug release within 5 min. Whereas the formulation F2 containing 5% concentration of starch glutamate, drug release characters were comparable to the formulation F8. Optimized formulation F2 attained peak plasma concentration within a short period and showed increased relative bioavailability of the drug. Conclusion: From the physical properties, disintegration time, in vitro dissolution studies and pharmacokinetic studies, it was concluded that fast dissolving tablets of aceclofenac tablets formulated by employing starch glutamate as a superdisintegrant enhanced the dissolution efficiency and improved the bioavailability of the drug as compared to the pure drug and stable.

scholarly journals FORMULATION AND EVALUATION OF STATISTICALLY DESIGNED IBUPROFEN FASTDISSOLVING TABLETS EMPLOYING STARCH GLUTAMATE AS A NOVEL SUPERDISINTEGRANT

2019 ◽  
pp. 85-94
Author(s):  
SANTOSH KUMAR R ◽  
SAHITHI MUDILI
Keyword(s):  
Peak Plasma ◽  
Potato Starch ◽  
Peak Plasma Concentration ◽  
Drug Dissolution ◽  
In Vitro Dissolution ◽  
Pharmacokinetic Studies ◽  
Compatibility Studies ◽  
Short Period ◽  
Excipient Compatibility

Objective: The main aim of the present work is to enhance the solubility and bioavailability of the ibuprofen by formulating it into fast-dissolving tablets employing starch glutamate as a novel superdisintegrant. Materials and Methods: Starch glutamate was prepared from native potato starch and glutamic acid by the esterification process. Drug-excipient compatibility studies were performed between the starch glutamate and ibuprofen with the help of Fourier transform infrared spectroscopy, and differential scanning calorimetry techniques. Ibuprofen fast dissolving tablets were formulated employing different superdisintegrants along with the starch glutamate (a novel superdisintegrant) by the direct compression method. The prepared ibuprofen fast-dissolving tablets were evaluated for various pre- and post-compression parameters along with the in vitro and in vivo release characteristics. Optimized formulation stability studies were performed at accelerated conditions for 6 months as per the International Conference on Harmonization (ICH) and WHO guidelines. Results: Drug-excipient compatibility studies indicated that prepared starch glutamate was compatible with ibuprofen drug, and it can be used as a superdisintegrant in the formulation of fast-dissolving tablets. Fast-dissolving tablets of ibuprofen were formulated by employing starch glutamate as a superdisintegrant showed good tablet properties and showed an increased dissolution efficiency of the drug. Among all the formulations (F1–F8), the formulation F4 which contains 5% starch glutamate and 5% croscarmellose sodium as superdisintegrants showed 99.7±0.34% drug dissolution within 5 min. Peak plasma concentration of optimized formulation F2 was achieved in a short period of time and increased relative bioavailability and F2 was found to be stable during accelerated stability testing as per the ICH stability guidelines. Conclusion: From drug-excipient compatibility studies, disintegration time, in vitro dissolution studies, and pharmacokinetic studies, it was concluded that starch glutamate can be used as a superdisintegrant in the formulation of fast-dissolving tablets to increase the solubility as well as bioavailability of the poorly soluble drugs.

scholarly journals Formulation and Pharmacokinetics of Flurbiprofen Sublimated Fast Dissolving Tablets#

2015 ◽  
Vol 2 (1) ◽  
pp. 56-65 ◽  
Author(s):  
Sateesh K. Vemula ◽  
Santhosh G. Reddy
Keyword(s):  
Drug Release ◽  
Dissolution Rate ◽  
Peak Plasma ◽  
Peak Plasma Concentration ◽  
Area Under The Curve ◽  
Physical Parameters ◽  
Pharmacokinetic Studies ◽  
Disintegration Time ◽  
Sublimation Method

Present study efforts are focusing to develop the flurbiprofen fast dissolving tablets using sublimation method to enhance the dissolution rate. In this study an attempt was made to fasten the drug release from the oral tablets by incorporating the sublimating agents in the presence of crosspovidone as superdisintegrant and studied the effect on dissolution rate when compared to conventional tablets. In the present study, sublimated fast dissolving tablets were prepared by direct compression method. The prepared tablets were characterized for physical parameters and drug release behavior and the best formulation was subjected to pharmacokinetic studies. From in vitro drug release studies, the formulation F2 showed fast drug release of about 99.94±0.26% in 30 min, and disintegration time 34.42 ± 0.74 sec. The percent drug release in 15 min (Q15) and initial dissolution rate for formulation F2 was 91.46±1.42%, 6.10%/min. The dissolution efficiency was found to be 53.44 and it is increased by 4.5 fold with F2 sublimated tablets. From the pharmacokinetic evaluation, the conventional tablets producing peak plasma concentration (Cmax) was 9023.68±561.83 ng/ml at 3 h Tmax and F2 sublimated tablets showed Cmax 11126.71±123.56 ng/ml at 2 h Tmax. The area under the curve for the conventional and F2 tablets was 30968.42±541.52 and 42973.66±568.13 ng h/ml. Hence, the development of flurbiprofen fast dissolving tablets by sublimation method is a right way to enhance not only the dissolution rate but also the absorption rate.

Significance of In-Vitro and In-Vivo Correlation in Drug Delivery System

2018 ◽  
Vol 4 (4) ◽  
pp. 523-531
Author(s):  
Hina Mumtaz ◽  
Muhammad Asim Farooq ◽  
Zainab Batool ◽  
Anam Ahsan ◽  
Ashikujaman Syed
Keyword(s):  
Dosage Form ◽  
Pharmaceutical Preparations ◽  
Pharmacokinetic Profile ◽  
In Vitro Dissolution ◽  
Time Saving ◽  
Pharmaceutical Dosage Form ◽  
Short Period ◽  
Form Development

The main purpose of development pharmaceutical dosage form is to find out the in vivo and in vitro behavior of dosage form. This challenge is overcome by implementation of in-vivo and in-vitro correlation. Application of this technique is economical and time saving in dosage form development. It shortens the period of development dosage form as well as improves product quality. IVIVC reduce the experimental study on human because IVIVC involves the in vivo relevant media utilization in vitro specifications. The key goal of IVIVC is to serve as alternate for in vivo bioavailability studies and serve as justification for bio waivers. IVIVC follows the specifications and relevant quality control parameters that lead to improvement in pharmaceutical dosage form development in short period of time. Recently in-vivo in-vitro correlation (IVIVC) has found application to predict the pharmacokinetic behaviour of pharmaceutical preparations. It has emerged as a reliable tool to find the mode of absorption of several dosage forms. It is used to correlate the in-vitro dissolution with in vivo pharmacokinetic profile. IVIVC made use to predict the bioavailability of the drug of particular dosage form. IVIVC is satisfactory for the therapeutic release profile specifications of the formulation. IVIVC model has capability to predict plasma drug concentration from in vitro dissolution media.

Design and In vivo Evaluation of Palonosetron HCl Mouth Dissolving Films in the Management of Chemotherapy-Induced Vomiting

2017 ◽  
Vol 10 (6) ◽  
pp. 3929-3936
Author(s):  
Y. Srinivasa Rao ◽  
K. Adinarayana Reddy
Keyword(s):  
Drug Release ◽  
Patient Compliance ◽  
Onset Of Action ◽  
In Vivo Evaluation ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Surface Ph ◽  
Drug Content

Fast dissolving oral delivery systems are solid dosage forms, which disintegrate or dissolve within 1 minute in the mouth without drinking water or chewing. Mouth dissolving film (MDF) is a better alternate to oral disintegrating tablets due to its novelty, ease of use and the consequent patient compliance. The purpose of this work was to develop mouth dissolving oral films of palonosetron HCl, an antiemetic drug especially used in the prevention and treatment of chemotherapy-induced nausea and vomiting. In the present work, the films were prepared by using solvent casting method with various polymers HPMC E3, E5 & E15 as a film base synthetic polymer, propylene glycol as a plasticizer and maltodextrin and other polymers. Films were found to be satisfactory when evaluated for thickness, in vitro drug release, folding endurance, drug content and disintegration time. The surface pH of all the films was found to be neutral. The in vitro drug release of optimized formulation F29 was found to be 99.55 ± 6.3 7% in 7 min. The optimized formulation F29 also showed satisfactory surface pH, drug content (99.38 ± 0.08 %), disintegration time of 8 seconds and good stability. FTIR data revealed that no interaction takes place between the drug and polymers used in the optimized formulation. In vitro and in vivo evaluation of the films confirmed their potential as an innovative dosage form to improve delivery and quick onset of action of Palonosetron Hydrochloride. Therefore, the mouth dissolving film of palonosetron is potentially useful for the treatment of emesis disease where quick onset of action is desired, also improved patient compliance.

Formulation and Evaluation of Orally Disintegrating Tablets of Lamotrigine

2015 ◽  
Vol 8 (2) ◽  
pp. 2881-2888
Author(s):  
Sudarshan Singh ◽  
S S Shyale ◽  
P Karade
Keyword(s):  
Drug Release ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Orally Disintegrating Tablet ◽  
Drug Content ◽  
Weight Variation ◽  
Wetting Time ◽  
Croscarmellose Sodium

The aim of this study was to design orally disintegrating tablet (ODT) of Lamotrigine. It is an Antiepileptic drug which is widely used in epilepsy. It is also used in simple and complex partial seizures and secondary generalized tonic-clonic seizures. It is poorly water soluble drug (0.46 mg/ml). Thus, an attempt was made to enhance the water solubility by complexation with β-cyclodextrin (1:1 molar ratios). The orally disintegrating tablet of lamotrigine was prepared by direct compression method using different concentration of superdisintegrants such as Sodium starch glycollate, croscarmellose sodium by sublimating agent such as camphor. The formulations were evaluated for weight variation, hardness, friability, drug content, wetting time, in vitro disintegration time and in vitro dissolution studies. The prepared tablets were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. The disintegration time for the complexed tablets prepared by different concentration of superdisintegrants was found to be in range of 32.54 ± 0.50 to 55.12 ± 0.57 sec and wetting time of the formulations was found to be in range of 28.47 ± 0.67 to 52.19 ± 0.72 sec. All the formulation showed almost 100 percent of drug release within 15 min. Among all the formulation F6 and F7 prepared with 18% croscarmellose sodium and camphor shows faster drug release, respectively 10 min, F6 gives good result for disintegration time, drug release, wetting time and friability. Further formulations were subjected to stability testing for 30 days at temperature of 40 ± 5 ºC/75 ± 5 %RH. Tablets showed no appreciable changes with respect to physical appearance, drug content, disintegration time and dissolution profiles. Results were statistically analyzed by one-way ANOVA at a p < 0.05. It was found that, the data at any point of time are significant at p < 0.05.

scholarly journals Development and In Vitro-In Vivo Evaluation of a Novel Sustained-Release Loxoprofen Pellet with Double Coating Layer

Pharmaceutics ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 260 ◽  
Author(s):  
Dongwei Wan ◽  
Min Zhao ◽  
Jingjing Zhang ◽  
Libiao Luan
Keyword(s):  
Citric Acid ◽  
Drug Release ◽  
Sustained Release ◽  
Release Rate ◽  
Diffusion Rate ◽  
Immediate Release ◽  
Pharmacokinetic Studies ◽  
Release Tablet

This study aimed to develop a novel sustained release pellet of loxoprofen sodium (LXP) by coating a dissolution-rate controlling sub-layer containing hydroxypropyl methyl cellulose (HPMC) and citric acid, and a second diffusion-rate controlling layer containing aqueous dispersion of ethyl cellulose (ADEC) on the surface of a LXP conventional pellet, and to compare its performance in vivo with an immediate release tablet (Loxinon®). A three-level, three-factor Box-Behnken design and the response surface model (RSM) were used to investigate and optimize the effects of the citric acid content in the sub-layer, the sub-layer coating level, and the outer ADEC coating level on the in vitro release profiles of LXP sustained release pellets. The pharmacokinetic studies of the optimal sustained release pellets were performed in fasted beagle dogs using an immediate release tablet as a reference. The results illustrated that both the citric acid (CA) and ADEC as the dissolution- and diffusion-rate controlling materials significantly decreased the drug release rate. The optimal formulation showed a pH-independent drug release in media at pH above 4.5 and a slightly slow release in acid medium. The pharmacokinetic studies revealed that a more stable and prolonged plasma drug concentration profile of the optimal pellets was achieved, with a relative bioavaibility of 87.16% compared with the conventional tablets. This article provided a novel concept of two-step control of the release rate of LXP, which showed a sustained release both in vitro and in vivo.

Formulation and Evaluation of Orodispersible Tablets Containing Taste Masked Mirabegron Resinate

2021 ◽  
pp. 4736-4742
Author(s):  
Sarika S. Malode ◽  
Milind P. Wagh
Keyword(s):  
Overactive Bladder ◽  
Bitter Taste ◽  
In Vitro Release ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Disintegration Time ◽  
Orodispersible Tablets ◽  
Weight Variation

The objective of present work was to develop taste masked orodispersible tablets of mirabegron. Mirabegron is beta 3 adrenoceptor agonist used to treat overactive bladder. Overactive bladder (OAB) is defined as a symptom syndrome showing feeling of urgency to urinate, typically accompanied by frequent daytime and nocturnal urination, in the absence of proven infection or other obvious pathology. Over active bladders are generally common in geriatrics. Moreover, this drug has a very strong bitter taste. Frequent dosing requires frequent water intake, which further aggregates the condition of over active bladder and bitter taste of drug affects patient compliance. Hence a need arises to mask the bitter taste for development of an ODT which does not require consuming water with every dosage. In this work, the bitter taste of mirabegron was masked by forming a complex with an ion exchange resin tulsion 344. The drug resin complexation process was optimized for resin activation, drug: resin ratio, soaking time and stirring time. In –vitro release studies revealed complete drug elution from the complex within 10 minutes in pH 1.2 buffer. The taste-masked complex was then formulated into palatable orodispersible tablets using a direct compression approach by use of superdisintegrants to achieve a rapid disintegration. The tablets were evaluated for weight variation, hardness, friability, drug content, wetting time, In- vivo disintegration time and in-vitro dissolution time.

scholarly journals Design and Characterization of Combinational Domperidone-Famotidine Floating Drug Delivery System - In vitro and In vivo studies

2021 ◽  
Vol 62 (2) ◽  
pp. 144-162
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Oral Administration ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Introduction: The drawbacks assosiated with oral administration of drugscan be controlled or minimized by gastro retentive formulations that remain buoyant within the stomach for an extended time by providing prolonged gastric retention and releasethe drug in an exceedingly extended manner thereby improving bioavailability. The current research was to develop and optimize Domperidone and Famotidine floating tablets with extended release by Quality by Design approach. Method: Based on QTPP (Quality Target Product Profile), CQAs (Critical Quality Attributes)wereidentified. Risk analysis by the evaluation of formulation and process parameters showed that optimizing the levels of polymers could reduce high risk to achieve the target profile. A 23factor experimental design with midpoints was selected for statistical analysis and optimization. Results: HPMC K100 and Carbopol 934P had a positive effect while ethyl cellulose demonstrated a negative effect on the selected responses. Drug release kinetics followed the first-order release with Higuchi diffusion and Fickian diffusion. Optimized formula satisfying all the required parameters was selected and evaluated. The predicted response values were in close agreement with experimental response values. Abdominal X-ray imaging after oral administration of the tablets on a healthy rabbit’s stomach confirmed the extended floating behavior with shorter lag time. In vivo, pharmacokinetic studies in rabbits revealed that the optimized formulation exhibited prolonged drug release with enhanced Cmax, tmax, AUCo-t, and t1/2 of an optimized product when compared to the marketed product. Conclusions: It has been concluded that the application of Quality by Design in the formulation and optimization reduced the number of trials to produce a cost-effective formula.

scholarly journals Design Optimization and In Vitro-In Vivo Evaluation of Orally Dissolving Strips of Clobazam

2014 ◽  
Vol 2014 ◽  
pp. 1-15 ◽  
Author(s):  
Rajni Bala ◽  
Sushil Khanna ◽  
Pravin Pawar
Keyword(s):  
Tensile Strength ◽  
Drug Release ◽  
Content Uniformity ◽  
In Vivo Evaluation ◽  
Disintegration Time ◽  
Significant Difference ◽  
Film Formulation ◽  
Test Film

Clobazam orally dissolving strips were prepared by solvent casting method. A full 32 factorial design was applied for optimization using different concentration of film forming polymer and disintegrating agent as independent variable and disintegration time, % cumulative drug release, and tensile strength as dependent variable. In addition the prepared films were also evaluated for surface pH, folding endurance, and content uniformity. The optimized film formulation showing the maximum in vitro drug release, satisfactory in vitro disintegration time, and tensile strength was selected for bioavailability study and compared with a reference marketed product (frisium5 tablets) in rabbits. Formulation (F6) was selected by the Design-expert software which exhibited DT (24 sec), TS (2.85 N/cm2), and in vitro drug release (96.6%). Statistical evaluation revealed no significant difference between the bioavailability parameters of the test film (F6) and the reference product. The mean ratio values (test/reference) of Cmax (95.87%), tmax (71.42%), AUC0−t (98.125%), and AUC0−∞ (99.213%) indicated that the two formulae exhibited comparable plasma level-time profiles.

Fabrication and Evaluation of Mouth Dissolving Strips of Metoclopramide Hydrochloride by Using Novel Film Former

2021 ◽  
pp. 5515-5520
Author(s):  
Hemant A. Deokule ◽  
Smita S. Pimple ◽  
Praveen D. Chaudhari ◽  
Ajit S. Kulkarni
Keyword(s):  
Drug Release ◽  
Research Work ◽  
Systemic Circulation ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Visual Appearance ◽  
Dsc Studies ◽  
Weight Variation ◽  
Metoclopramide Hydrochloride

Fast dissolving strips are used as novel approaches, as it dissolves rapidly in mouth and directly reaches the systemic circulation. In present research work, an attempt has been made to prepare mouth dissolving strips of Metoclopramide hydrochloride by using a novel film former Pullulan by solvent casting method. A33 full factorial design was utilized for the optimization of the effect of independent variables such as the amount of Pullulan, amount of PEF 400, amount of SSG on mechanical properties, and % drug release of strips. The drug compatibility studies using FTIR and DSC studies formulated strips were characterized for their physicochemical parameter like weight variation, visual appearance, folding endurance, thickness, disintegration time, drug content, and in vitro dissolution studies. FTIR and DSC studies revealed that the polymer is compatible with the drug. It was found that the optimum levels of the responses for a fast release strip could be obtained at low levels of Pullulan, PEG400, and SSG. The prepared strip was clear transparent and had a smooth surface. The surface pH was found 4.8 to 5.2 be in the range of to which is close to salivary pH, which indicates that strips may have less potential to irritate the oral mucosa, thereby they are comfortable. The drug release was found to be between 90.94 to 100.5% in 2 min. The in-vitro disintegration time of strips prepared with Pullulan was in the range of 19 to 57 sec. As the concentration of SSG increases the decrease in the disintegration time of strips a decrease. The dissolution rate increased with an increase in the concentration of SSG. Hence, it can be inferred that the fast dissolving oral strips of Metoclopramide hydrochloride may produce rapid action thereby improving bioavailability and enhance the absorption by avoiding the first-pass effect.

Sign in / Sign up

Export Citation Format

Share Document