scholarly journals Composite Drug Delivery System Based on Amorphous Calcium Phosphate–Chitosan: An Efficient Antimicrobial Platform for Extended Release of Tetracycline

Pharmaceutics ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1659
Author(s):  
Anita Ioana Visan ◽  
Carmen Ristoscu ◽  
Gianina Popescu-Pelin ◽  
Mihai Sopronyi ◽  
Consuela Elena Matei ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Amorphous Calcium Phosphate ◽  
Extended Release ◽  
Composite Coatings ◽  
Burst Release ◽  
Large Area ◽  
Drug Release Profile ◽  
Composite Mixture ◽  
Drug Incorporation

One major warning emerging during the first worldwide combat against healthcare-associated infections concerns the key role of the surface in the storage and transfer of the virus. Our study is based on the laser coating of surfaces with an inorganic/organic composite mixture of amorphous calcium phosphate–chitosan–tetracycline that is able to fight against infectious agents, but also capable of preserving its activity for a prolonged time, up to several days. The extended release in simulated fluids of the composite mixture containing the drug (tetracycline) was demonstrated by mass loss and UV–VIS investigations. The drug release profile from our composite coatings proceeds via two stages: an initial burst release (during the first hours), followed by a slower evolution active for the next 72 h, and probably more. Optimized coatings strongly inhibit the growth of tested bacteria (Enterococcus faecalis and Escherichia coli), while the drug incorporation has no impact on the in vitro composite’s cytotoxicity, the coatings proving an excellent biocompatibility sustaining the normal development of MG63 bone-like cells. One may, therefore, consider that the proposed coatings’ composition can open the prospective of a new generation of antimicrobial coatings for implants, but also for nosocomial and other large area contamination prevention.

scholarly journals Evaluation of metallic brackets adhesion after the use of bleaching gels with and without amorphous calcium phosphate (ACP): in vitro study

2013 ◽  
Vol 18 (3) ◽  
pp. 101-106 ◽  
Author(s):  
Sissy Maria Mendes Machado ◽  
Diego Bruno Pinho do Nascimento ◽  
Robson Costa Silva ◽  
Sandro Cordeiro Loretto ◽  
David Normando
Keyword(s):  
Calcium Phosphate ◽  
Bond Strength ◽  
Amorphous Calcium Phosphate ◽  
Shear Bond Strength ◽  
Mechanical Test ◽  
In Vitro Study ◽  
Control Group ◽  
Test Machine ◽  
Tooth Whitening

OBJECTIVE: To evaluate in vitro the effects of tooth whitening using gel with Amorphous Calcium Phosphate (ACP) on the bond strength of metal brackets. METHODS: Thirty-six bovine incisors were sectioned at the crown-root interface, and the crowns were then placed in PVC cylinders. The specimens were divided into 3 groups (n = 12) according to whitening treatment and type of gel used, as follows: G1 (control) = no whitening; G2 = whitening with gel not containing ACP (Whiteness Perfect - FGM), G3 = whitening with gel containing ACP (Nite White ACP - Discus Dental). Groups G2 and G3 were subjected to 14 cycles of whitening followed by an interval of 15 days before the bonding of metal brackets. Shear bond strength testing was performed on a Kratos universal test machine at a speed of 0.5 mm/min. After the mechanical test, the specimens were assessed to determine the adhesive remnant index (ARI). The results were subjected to ANOVA, Tukey's test and Kruskal-Wallis test (5%). RESULTS: Significant differences were noted between the groups. Control group (G1 = 11.10 MPa) showed a statistically higher shear bond strength than the groups that underwent whitening (G2 = 5.40 Mpa, G3 = 3.73 MPa), which did not differ from each other. There were no significant differences between the groups in terms of ARI. CONCLUSION: Tooth whitening reduces the bond strength of metal brackets, whereas the presence of ACP in the whitening gel has no bearing on the results.

scholarly journals Phosphoserine Functionalized Cements Preserve Metastable Phases, and Reprecipitate Octacalcium Phosphate, Hydroxyapatite, Dicalcium Phosphate, and Amorphous Calcium Phosphate, during Degradation, In Vitro

2019 ◽  
Vol 10 (4) ◽  
pp. 54 ◽  
Author(s):  
Joseph Lazraq Bystrom ◽  
Michael Pujari-Palmer
Keyword(s):  
Calcium Phosphate ◽  
Amorphous Calcium Phosphate ◽  
Octacalcium Phosphate ◽  
Ionic Concentration ◽  
Strong Adhesion ◽  
Acidic Conditions ◽  
Rapid Transformation ◽  
Comparable Mass

Phosphoserine modified cements (PMC) exhibit unique properties, including strong adhesion to tissues and biomaterials. While TTCP-PMCs remodel into bone in vivo, little is known regarding the bioactivity and physiochemical changes that occur during resorption. In the present study, changes in the mechanical strength and composition were evaluated for 28 days, for three formulations of αTCP based PMCs. PMCs were significantly stronger than unmodified cement (38–49 MPa vs. 10 MPa). Inclusion of wollastonite in PMCs appeared to accelerate the conversion to hydroxyapatite, coincident with slight decrease in strength. In non-wollastonite PMCs the initial compressive strength did not change after 28 days in PBS (p > 0.99). Dissolution/degradation of PMC was evaluated in acidic (pH 2.7, pH 4.0), and supersaturated fluids (simulated body fluid (SBF)). PMCs exhibited comparable mass loss (<15%) after 14 days, regardless of pH and ionic concentration. Electron microscopy, infrared spectroscopy, and X-ray analysis revealed that significant amounts of brushite, octacalcium phosphate, and hydroxyapatite reprecipitated, following dissolution in acidic conditions (pH 2.7), while amorphous calcium phosphate formed in SBF. In conclusion, PMC surfaces remodel into metastable precursors to hydroxyapatite, in both acidic and neutral environments. By tuning the composition of PMCs, durable strength in fluids, and rapid transformation can be obtained.

scholarly journals Efficiency of Amorphous Calcium Phosphate–Containing Orthodontic Composite and Resin Modified Glass Ionomer on Demineralization Evaluated By a New Laser Fluorescence Device

2009 ◽  
Vol 03 (02) ◽  
pp. 127-134 ◽  
Author(s):  
Tancan Uysal ◽  
Mihri Amasyali ◽  
Alp Erdin Koyuturk ◽  
Deniz Sagdic
Keyword(s):  
Calcium Phosphate ◽  
Amorphous Calcium Phosphate ◽  
Glass Ionomer Cement ◽  
Laser Fluorescence ◽  
Orthodontic Brackets ◽  
Glass Ionomer ◽  
Enamel Demineralization ◽  
Significant Difference ◽  
Resin Modified Glass Ionomer

ABSTRACTObjectives: The aim of this in vitro study was to compare the efficacy of Amorphous Calcium Phosphate (ACP)-containing orthodontic composite and resin-modified glass ionomer cement (RMGIC) on enamel demineralization adjacent to orthodontic brackets evaluated by a new laser fluorescence device.Methods: Sixty extracted maxillary premolars were used in the present study. Twenty orthodontic brackets were bonded with ACP-containing orthodontic adhesive (Aegis-Ortho), 20 were bonded with RMGIC (Fuji Ortho LC) ad20 were bonded with Transbond XT composite as the control. All samples were then cycled for 21 days through a daily procedure of demineralization for 6 hours and remineralization for 17 hours. After this procedure, demineralization evaluations were undertaken by a pen-type laser fluorescence device (DIAGNO-dent Pen). Analysis ofvariance (ANOVA) and Tukey test was used for statistical evaluation, at P<.05 level.Results: According to ANOVA, significant demineralization variations (ΔD) were determined among groups (F=6.650; P<.01). The ACP-containing composite showed the lowest (mean: 8.98±2.38) and the control composite showed the highest (mean:12.15±3.83) ΔD, during 21 days demineralization process (P<.01). Significant difference was also observed between the ΔD scores of the RMGIC (mean: 9.24±2.73) and control (P<.05).No significant differences was found in preventive effects of ACP-containing composite and RMGIC (P<.05) against demineralization.Conclusions: The use of both ACP-containing orthodontic composite and RMGIC should be recommended for any at-risk orthodontic patient to provide preventive actions and potentially remineralize subclinical enamel demineralization. (Eur J Dent 2009;3:127-134)

scholarly journals Biomimetic Collagen/Zn2+-Substituted Calcium Phosphate Composite Coatings on Titanium Substrates as Prospective Bioactive Layer for Implants: A Comparative Study Spin Coating vs. MAPLE

Nanomaterials ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 692 ◽  
Author(s):  
Ionela Andreea Neacsu ◽  
Laura Vasilica Arsenie ◽  
Roxana Trusca ◽  
Ioana Lavinia Ardelean ◽  
Natalia Mihailescu ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Comparative Study ◽  
Spin Coating ◽  
Composite Coatings ◽  
Titanium Implants ◽  
Laser Evaporation ◽  
Mineralization Process ◽  
Ftir Microscopy ◽  
Titanium Substrates

Synthesis of biomimetic materials for implants and prostheses is a hot topic in nanobiotechnology strategies. Today the major approach of orthopaedic implants in hard tissue engineering is represented by titanium implants. A comparative study of hybrid thin coatings deposition was performed by spin coating and matrix-assisted pulsed laser evaporation (MAPLE) onto titanium substrates. The Collagen-calcium phosphate (Coll-CaPs) combination was selected as the best option to mimic natural bone tissue. To accelerate the mineralization process, Zn2+ ions were inserted by substitution in CaPs. A superior thin film homogeneity was assessed by MAPLE, as shown by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) microscopy. A decrease of P-O and amide absorbance bands was observed as a consequence of different Zn2+ amounts. A variety of structural modifications of the apatite layer are then generated, which influenced the confinement process towards the collagen template. The in-vitro Simulated Body Fluid (SBF) assay demonstrated the ability of Coll/Zn2+-CaPs coatings to stimulate the mineralization process as a result of synergic effects in the collagen-Zn2+ substituted apatite. For both deposition methods, the formation of droplets associated to the growth of CaPs particulates inside the collagen matrix was visualized. This supports the prospective behavior of MAPLE biomimetic coatings to induce mineralization, as an essential step of fast implant integration with vivid tissues.

scholarly journals Comparison of the Efficacy of Different Fluoride Varnishes on Dentin Remineralization During a Critical pH Exposure Using Quantitative X-Ray Microtomography

2018 ◽  
Vol 43 (6) ◽  
pp. E308-E316
Author(s):  
A Sleibi ◽  
A Tappuni ◽  
D Mills ◽  
GR Davis ◽  
A Baysan
Keyword(s):  
Calcium Phosphate ◽  
Amorphous Calcium Phosphate ◽  
Mineral Content ◽  
Test Group ◽  
Control Group ◽  
Mineral Concentration ◽  
Voxel Size ◽  
X Ray ◽  
Casein Phosphopeptide

SUMMARY Objectives: The objective of this in vitro study was to quantify the amount of mineral change in demineralized dentin at pH 5.5 after the application of dental varnishes containing fluoride with casein phosphopeptide–amorphous calcium phosphate, fluoride and bioglass, or fluoride alone. Methods and Materials: A total of 12 extracted human sound mandibular premolar root samples were coated with an acid-resistant varnish, leaving a 2 × 3 mm window at the outer root surface. These root specimens were then randomly divided into four groups and separately subjected to the demineralizing cycle at a pH of 4.8 for five days to create artificial caries-like lesions in dentin. Subsequently, each sample was imaged using quantitative x-ray microtomography (XMT) at a 15-μm voxel size. Each test group then received one of the following treatments: dental varnish containing casein phosphopeptide–amorphous calcium phosphate and fluoride (CPP-ACP, MI varnish, GC Europe), bioglass and fluoride (BGA, Experimental, Dentsply Sirona), or fluoride alone (NUPRO, Dentsply Sirona), as well as a control group, which received no treatment. These samples were kept in deionized water for 12 hours. The thin layer of varnish was then removed. All samples including the nonvarnish group were subjected to the second demineralizing cycle at pH 5.5 for five days. The final XMT imaging was then carried out following the second demineralizing cycle. XMT scan was also carried out to varnish samples at 25 μm voxel size. The change in mineral concentration in the demineralized teeth was assessed using both qualitative and quantitative image analysis. Results: There was an increase in radiopacity in the subtracted images of all varnish groups; a significant increase in mineral content, 12% for the CPP-ACP and fluoride (p≤0.05 and p≤0.001), 25% BGA (p≤0.001), and 104% fluoride alone varnish (p≤0.001). There was an increase in the size of radiolucency in the lesion area with a significant decrease in mineral content in the nonvarnish group, 10% (p≤0.05 and p≤0.001). Conclusions: There was encouraging evidence of a remineralization effect following the application of dental varnish on dentin and also an observed resistance to demineralization during the acidic challenge in all cases. However, a dental varnish containing fluoride alone appeared to have a much greater effect on dentin remineralization when compared with CPP-ACP with fluoride and bioglass with fluoride.

Sign in / Sign up

Export Citation Format

Share Document