scholarly journals Thermosensitive Poly(DHSe/PEG/PPG Urethane)-Based Hydrogel Extended Remdesivir Application in Ophthalmic Medication

Pharmaceutics ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 50
Author(s):  
Sennan Xu ◽  
Lingjie Ke ◽  
Sichen Zhao ◽  
Zhiguo Li ◽  
Yang Xiao ◽  
...  
Keyword(s):  
Sol Gel ◽  
In Vitro Release ◽  
Water Soluble ◽  
Prolonged Release ◽  
In Situ Gel ◽  
Sol Gel Transition ◽  
Novel Coronavirus

The spread of infection with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) caused the coronavirus disease 2019 (COVID-19) outbreak beginning in March 2020. Currently, there is a lack of suitable dose formulations that interrupt novel coronavirus transmission via corneal and conjunctival routes. In the present study, we developed and evaluated a thermosensitive gelling system based on a selenium-containing polymer for topical ocular continuous drug release. In detail, di-(1-hydroxylundecyl) selenide (DHSe), poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG) were polymerized to form poly(DHSe/PEG/PPG urethane). The polymer was used to carry poorly water-soluble remdesivir (RDV) at room temperature to form the final thermosensitive in situ gel, which exhibited a typical sol-gel transition at 35 °C. The formed polymer was further characterized by rheology, thermology, and scanning electron microscopy. In vitro release studies and in vivo retention and penetration tests indicated that the thermogel provided the prolonged release of RDV. The RDV-loaded in situ gel was proven to be non-biotoxic against human corneal epithelial cells, with good ocular tolerance and biocompatibility in rabbit eyes.

Thermo-sensitive hydrogel PLGA-PEG-PLGA as a vaccine delivery system for intramuscular immunization

2016 ◽  
Vol 31 (6) ◽  
pp. 923-932 ◽  
Author(s):  
Xiaoyan Wang ◽  
Yu Zhang ◽  
Wei Xue ◽  
Hong Wang ◽  
Xiaozhong Qiu ◽  
...  
Keyword(s):  
Delivery System ◽  
Sol Gel ◽  
Vaccine Delivery ◽  
In Vitro Release ◽  
Vaccine Delivery System ◽  
Th1 And Th2 Cytokines ◽  
Specific Igg ◽  
Sol Gel Transition

In this work, we explored the potential of thermo-sensitive PLGA-PEG-PLGA with sol-gel transition temperature around 32℃ as an intramuscular vaccine delivery system by using ovalbumin as a model antigen. First, in vitro release test showed that the PLGA-PEG-PLGA-deriving hydrogels could release ovalbumin in vitro in a more sustainable way. From fluorescence living imaging, 50–200 mg/mL of PLGA-PEG-PLGA formulations could release antigen in a sustainable manner in vivo, suggesting that the PLGA-PEG-PLGA hydrogel worked as an antigen-depot. Further, the sustainable antigen release from the PLGA-PEG-PLGA hydrogels increased antigen availability in the spleens of the immunized mice. The intramuscular immunization results showed that 50–200 mg/mL of PLGA-PEG-PLGA formulations promoted significantly more potent antigen-specific IgG immune response. In addition, 200 mg/mL of PLGA-PEG-PLGA formulation significantly enhanced the secretion of both Th1 and Th2 cytokines. From in vitro splenocyte proliferation assay, 50–200 mg/mL of PLGA-PEG-PLGA formulations all initiated significantly higher splenocyte activation. These results indicate that the thermo-sensitive and injectable PLGA-PEG-PLGA hydrogels (particularly, 200 mg/mL of PLGA-PEG-PLGA-based hydrogel) own promising potential as an intramuscular vaccine delivery system.

scholarly journals OPHTHALMIC IN-SITU SUSTAINED GEL OF CIPROFLOXACIN, PREPARATION AND EVALUATION STUDY

2018 ◽  
Vol 10 (4) ◽  
pp. 153 ◽  
Author(s):  
Fadia Yassir Al-bazzaz ◽  
Myasar Al-kotaji
Keyword(s):  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
Poloxamer 407 ◽  
Gelling Agent ◽  
In Situ Gel ◽  
Viscosity Modifier ◽  
Vitro Release

Objective: This work aims to formulate and evaluate an ophthalmic in-situ gel of ciprofloxacin hydrochloride (HCl) using poloxamer 407 (P407) as a gelling agent and hydroxypropyl methylcellulose (HPMC) as a viscosity modifier. The objective of this work was to prolong the contact time as the in-situ gel will be converted into a gel upon contact with the cul-de-sac. Methods: Ciprofloxacin HCl ophthalmic in-situ gel was prepared by utilizing (P407) as a temperature-dependent polymer while hydroxypropyl methylcellulose was used as a viscosity modifier. The system was evaluated for physical appearance, pH, drug content, sterility, irritancy and stability. In addition, gelation temperature and a viscosity at different shear rates and different temperatures were studied. The compatibility of the polymer with ciprofloxacin was studied by using fourier transform infrared spectroscopy (FTIR). The in vitro release of the drug was also evaluated and supported by a preliminary in vivo test.Results: The results showed that the prepared formulas were clear, with acceptable pH and the drug contents were within the acceptable limits. FTIR results detected no incompatibility between poloxamer 407 and ciprofloxacin HCl. Notably, the viscosity of the system showed a pseudoplastic behaviour where a reduction in viscosity upon increasing the shear rate was observed. The in vitro release study confirmed the prolongation of the release of the optimized formula (F6) up to 8 h. Upon application of F6 into eyes of rabbits there was no irritancy. In addition, in vivo elimination study showed a prolonged contact for the in-situ gel in comparison with the rapid clearance of eye drop. Stability study indicated the stability of the optimized formula (F6). Conclusion: The prepared optimized formula (F6) represents a successful, safe, stable and prolonged release in-situ gel formula of ciprofloxacin.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

scholarly journals IN SITU GEL AS PLATFORM FOR KETOCONAZOLE SLOW RELEASE DOSAGE FORM

2018 ◽  
Vol 10 (5) ◽  
pp. 76
Author(s):  
Methaq Hamad Sabar ◽  
Iman Sabah Jaafar ◽  
Masar Basim Mohsin Mohamed
Keyword(s):  
Drug Release ◽  
Guar Gum ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
High Viscosity ◽  
In Situ Gel ◽  
Alginate Concentration

Objective: The aim of this study was to formulate ketoconazole (keto) as oral floating in situ gel to slow the release of keto in the stomach.Methods: Sodium alginate (Na alginate) was used as a primary polymer in the preparation of the in situ gel and was supported by the following polymers: guar gum (GG), hydroxypropyl methylcellulose (HPMC) K4M, K15M and carbapol 940 as viscosity enhancing agents. As a consequence, and to complete the gelation process of above formulations was by adding the calcium carbonate (CaCO3). The in situ gels were investigated by the following tests: floating lag time, floating duration, viscosity, drug content, in vitro gelling studies and in vitro release study.Results: The study showed that the faster release was obtained with F1 which contained Na alginate alone. Additionally, reduction in Na alginate concentration resulted in significant increase in drug release. It was also noted that the increase in GG (viscosity enhancing polymer) concentration resulted in non-significant decrease in percent drug release and the reduction in CaCO3 concentration led to significant increase in drug release. Moreover, the release of drug was also affected by grade of viscosity enhancing polymer, the faster release was observed with the formula which contained a polymer of low viscosity (HPMC K4M) and an opposite result was with the high viscosity polymer (HPMCK15M).Conclusion: This study showed the formulation of Na alginate with GG and CaCO3, led to gain floating in situ gel and a sustained release of keto. 

scholarly journals Nanocubosomal based in situ gel loaded with natamycin for ocular fungal diseases: development, optimization, in-vitro, and in-vivo assessment

Drug Delivery ◽  
2021 ◽  
Vol 28 (1) ◽  
pp. 1836-1848
Author(s):  
Khaled M. Hosny ◽  
Waleed Y. Rizg ◽  
Hala M. Alkhalidi ◽  
Walaa A. Abualsunun ◽  
Rana B. Bakhaidar ◽  
...  
Keyword(s):  
Fungal Diseases ◽  
In Situ Gel ◽  
In Vivo Assessment

DEVELOPMENT AND INVESTIGATION OF TIMOLOL MALEATE AND TRAVOPROST COMBINATION NIOSOMAL IN SITU GELLING SYSTEM FOR THE TREATMENT OF GLAUCOMA

INDIAN DRUGS ◽  
2015 ◽  
Vol 52 (07) ◽  
pp. 33-35
Author(s):  
A Dubey ◽  
◽  
P Prabhu ◽  
N Nair ◽  
K Beladiya ◽  
...  
Keyword(s):  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Timolol Maleate ◽  
In Situ Gel ◽  
Vesicle Size ◽  
Gelling Time ◽  
In Situ Gelling ◽  
Vitro Release

The aim of the present investigation was to develop a combination of timolol maleate and travoprost niosomal in situ gelling system for the treatment of glaucoma. Niosomes were prepared by thin film hydration technique using rotary flash evaporator. A 32 factorial design was utilized to study the effect of the molar ratio of Span 60 (X1) and cholesterol (X2) on vesicle size, drug entrapment efficiency and in vitro release study. On the basis of vesicle size, maximum entrapment efficiency and in vitro release of drug, best formulations were selected for the preparation of niosomal in situ gel (Drop). On the basis of gelling time and viscosity, optimized ratio of the polymers was selected for the desired preparation. Selected niosomal batches were dispersed in carbopol 940 and HPMC K4M polymer solution (combination IF6) to form in situ gel niosomal formulations (Drop). The gelling time of the niosomal in situ gel (NIF1) was found to be the best (+++) and the viscosity was found to be 1190 cP. Zeta potential, average size analysis, polydispersibility index value was found to be -45.1 mV, 256.5 nm, 0.228 respectively. In vitro drug release was found to be within the range of 50.23 ± 0.54 to 60.23 ± 0.33% over the period of 6 h. IOP lowering activity of best formulation (NIF1) showed more significant and sustained effect than the marketed eye drops. Best formulation (NIF1) was found to be stable, sterile, non irritant and isotonic. Hence niosomal in situ gelling combination system may have the potential of bringing better application than the conventional ocular therapy with improved ocular bioavailability and increased patient compliance.

scholarly journals Investigating the ocular toxicity potential and therapeutic efficiency of in situ gel nanoemulsion formulations of brinzolamide

2020 ◽  
Vol 9 (4) ◽  
pp. 578-587
Author(s):  
Sima Talaei ◽  
Mohammad Mehdi Mahboobian ◽  
Mojdeh Mohammadi
Keyword(s):  
Intraocular Pressure ◽  
Membrane Surface ◽  
Chorioallantoic Membrane ◽  
In Situ Gel ◽  
Toxicity Potential ◽  
Vessel Injury ◽  
Hen’S Egg

Abstract Glaucoma is an ocular disease i.e. more common in older adults with elevated intraocular pressure and a serious threat to vision if it is not controlled. Due to the limitations regarding the conventional form of brinzolamide (Azopt®), two optimum formulations of in situ gel nanoemulsion were developed. To ensure the safety and efficacy of developed formulations for ocular drug delivery, the current study was designed. MTT assay was carried out on the human retinal pigmentation epithelial cells. To investigate the irritation potential of the chosen formulations, hen’s egg test-chorioallantoic membrane as a borderline test between in vivo and in vitro methods has been done. The modified Draize method was utilized to evaluate eye tolerance against the selected formulations. Intraocular pressure was measured by applying the prepared formulations to the eyes of normotensive albino rabbits in order to assess the therapeutic efficacy. Based on MTT test, cell viability for NE-2 at 0.1% and NE-1 at 0.1 and 0.5% concentrations was acceptable. The results of the hen’s egg test-chorioallantoic membrane test indicated no sign of vessel injury on the chorioallantoic membrane surface for both formulations. Also, during 24 h, both formulations were well-tolerated by rabbit eyes. The pharmacodynamics effects of formulations had no difference or were even higher than that of suspension in case of adding lower concentration (0.5%) of brinzolamide to the formulations. With regard to the results of the mentioned methods, our advanced formulations were effective, safe, and well-tolerated, thus can be introduced as an appropriate vehicle for ocular delivery of brinzolamide.

scholarly journals In Situ Gel Formation in Microporated Skin for Enhanced Topical Delivery of Niacinamide

Pharmaceutics ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 472 ◽  
Author(s):  
Sonalika Bhattaccharjee ◽  
Moritz Beck-Broichsitter ◽  
Ajay K. Banga
Keyword(s):  
Molecular Weight ◽  
Sol Gel ◽  
Topical Delivery ◽  
Needle Length ◽  
Molecular Weight Polymer ◽  
Sol Gel Transition ◽  
Pre Treatment ◽  
Franz Diffusion Cells

Although used widely in cosmetic formulations, topical delivery of niacinamide (LogP = −0.35) is unfavorable by conventional means. Poly(lactide-co-glycolide) (PLGA) formulations, can undergo a sol-gel transition triggered by solvent exchange, entrapping molecules and sustaining their release. The current study aims to exploit the ability of PLGA to gel in situ and enhance the topical delivery of niacinamide in microporated skin. In vitro drug permeation studies were performed using vertical Franz diffusion cells. Microporation was performed using Dr. PenTM Ultima A6, where pre-treatment with a 1 mm needle-length for 10 s and a 0.5 mm needle-length for 5 s, both at 13,000 insertions/min were compared. The effect of different grades of PLGA, EXPANSORB® DLG 50-2A (“low” molecular weight), and EXPANSORB® DLG 50-8A (“high” molecular weight) on topical delivery was also determined. Formulations containing PLGA resulted in successful gelation in situ on application over microporated skin. A significantly higher amount of drug was found in the skin with the 0.5 mm treatment for 5 s (892 ± 36 µg/cm2) than with 1 mm for 10 s (167 ± 16 µg/cm2). Hence, the different grades of PLGA were evaluated with 0.5 mm, 5 s treatment, and a significantly larger amount was seen in skin with the higher rather than the lower molecular weight polymer (172 ± 53 µg/cm2).

Sucrose Acetate Isobutyrate as an In situ Forming Implant for Sustained Release of Local Anesthetics

2019 ◽  
Vol 16 (4) ◽  
pp. 331-340
Author(s):  
Hanmei Li ◽  
Yuling Xu ◽  
Yuna Tong ◽  
Yin Dan ◽  
Tingting Zhou ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Sustained Release ◽  
Local Anesthetics ◽  
Subcutaneous Injection ◽  
In Vitro Release ◽  
Pharmacokinetic Analysis ◽  
Burst Release

Objective: In this study, an injectable Sucrose Acetate Isobutyrate (SAIB) drug delivery system (SADS) was designed and fabricated for the sustained release of Ropivacaine (RP) to prolong the duration of local anesthesia. Methods: By mixing SAIB, RP, and N-methyl-2-pyrrolidone, the SADS was prepared in a sol state with low viscosity before injection. After subcutaneous injection, the pre-gel solution underwent gelation in situ to form a drug-released depot. Result: The in vitro release profiles and in vivo pharmacokinetic analysis indicated that RP-SADS had suitable controlled release properties. Particularly, the RP-SADS significantly reduced the initial burst release after subcutaneous injection in rats. Conclusion: In a pharmacodynamic analysis of rats, the duration of nerve blockade was prolonged by over 3-fold for the RP-SADS formulation compared to RP solution. Additionally, RP-SADS showed good biocompatibility in vitro and in vivo. Thus, the SADS-based depot technology is a safe drug delivery strategy for the sustained release of local anesthetics with long-term analgesia effects.

Sign in / Sign up

Export Citation Format

Share Document