scholarly journals Integrated Magnetohydrodynamic Pump with Magnetic Composite Substrate and Laser-Induced Graphene Electrodes

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1113
Author(s):  
Mohammed Asadullah Khan ◽  
Jürgen Kosel
Keyword(s):  
Magnetic Flux ◽  
Flow Rate ◽  
Magnetic Composite ◽  
Propulsive Force ◽  
Closed Channel ◽  
Lab On Chip ◽  
Composite Substrate ◽  
On Chip ◽  
High Level ◽  
Moving Parts

An integrated polymer-based magnetohydrodynamic (MHD) pump that can actuate saline fluids in closed-channel devices is presented. MHD pumps are attractive for lab-on-chip applications, due to their ability to provide high propulsive force without any moving parts. Unlike other MHD devices, a high level of integration is demonstrated by incorporating both laser-induced graphene (LIG) electrodes as well as a NdFeB magnetic-flux source in the NdFeB-polydimethylsiloxane permanent magnetic composite substrate. The effects of transferring the LIG film from polyimide to the magnetic composite substrate were studied. Operation of the integrated magneto hydrodynamic pump without disruptive bubbles was achieved. In the studied case, the pump produces a flow rate of 28.1 µL/min. while consuming ~1 mW power.

scholarly journals A Proof-of-Concept Study Using Numerical Simulations of an Acoustic Spheroid-on-a-Chip Platform for Improving 3D Cell Culture

Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5529
Author(s):  
Arash Yahyazadeh Shourabi ◽  
Roozbeh Salajeghe ◽  
Maryam Barisam ◽  
Navid Kashaninejad
Keyword(s):  
Flow Rate ◽  
Cultured Cells ◽  
3D Cell Culture ◽  
Potential Candidate ◽  
Proof Of Concept ◽  
Multicellular Spheroids ◽  
Lab On Chip ◽  
Main Challenge ◽  
Biological Studies ◽  
On Chip

Microfluidic lab-on-chip devices are widely being developed for chemical and biological studies. One of the most commonly used types of these chips is perfusion microwells for culturing multicellular spheroids. The main challenge in such systems is the formation of substantial necrotic and quiescent zones within the cultured spheroids. Herein, we propose a novel acoustofluidic integrated platform to tackle this bottleneck problem. It will be shown numerically that such an approach is a potential candidate to be implemented to enhance cell viability and shrinks necrotic and quiescent zones without the need to increase the flow rate, leading to a significant reduction in costly reagents’ consumption in conventional spheroid-on-a-chip platforms. Proof-of-concept, designing procedures and numerical simulation are discussed in detail. Additionally, the effects of acoustic and hydrodynamic parameters on the cultured cells are investigated. The results show that by increasing acoustic boundary displacement amplitude (d0), the spheroid’s proliferating zone enlarges greatly. Moreover, it is shown that by implementing d0  = 0.5 nm, the required flow rate to maintain the necrotic zone below 13% will be decreased 12 times compared to non-acoustic chips.

Integrated Microfluidic Flow Sensor for LAB-oN-CHIP and PoINT-oF-CARE Applications

2020 ◽  
Vol 36 (4) ◽  
pp. 112-120
Author(s):  
A.V. Zverev ◽  
M. Andronik ◽  
V.V. Echeistov ◽  
Z.H. Issabayeva ◽  
O.S. Sorokina ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Flow Rate ◽  
Microfluidic Chip ◽  
Soft Lithography ◽  
Point Of Care ◽  
Flow Sensor ◽  
Oxide Semiconductor ◽  
Dead Volume ◽  
Lab On Chip ◽  
On Chip

The results of the development and manufacture of an integrated membrane-free sensor for the control of accurate dilution of liquid samples on the microfluidic chip are presented. The proposed type of devices is intended for direct precise measurements of liquid flow rate in microchannels of laboratories-on-chip, including point-of-care systems. The sensor topology was optimized based on the numerical simulation results and technological requirements. The main characteristic of the developed sensor is the lack of a membrane in the design while maintaining the sensitivity and accuracy of the device at the level of a commercial membrane analogue. The fully biocompatible sensor was manufactured using standard microelectronics and soft lithography technologies. In order to optimize the sensor design, 32 different topologies of the device were tested. The integration of the flow sensors on the chip allows to significantly reduce the dead volume of the hydrodynamic system and to control the amount of liquid entering the individual reservoirs of the microfluidic chip. The sensor occupies an area of (210 x 140) um2 in the channel and is characterized by a relative error of 5% in the flow rate range of 100-1000 ul/min. microfluidics, lab-on-chip, calorimetric flow sensor, thermoresistive sensor, numerical simulation, hydrodynamics, complementary metal-oxide-semiconductor, microtechnologies Devices were made at the BMSTU Nanofabrication Facility (FMN Laboratory, FMNS REC, ID 74300).

Study of Permissible Flow Rate and Mixing Efficiency of the Micromixer Devices

2018 ◽  
Vol 17 (1) ◽  
Author(s):  
K Karthikeyan ◽  
L Sujatha
Keyword(s):  
Flow Rate ◽  
Low Cost ◽  
Microfluidic Channel ◽  
Low Flow ◽  
Mixing Efficiency ◽  
Flow Rates ◽  
Lab On Chip ◽  
Serpentine Channel ◽  
Mixing Behavior ◽  
On Chip

AbstractThis paper deals with design, simulation, fabrication, analysis of mixing efficiency and thin film bonding stability of the micromixer devices with different flow rates used for lab on chip applications. The objective of the present study is to achieve complete mixing with low flow rate and less pressure drop in low cost polymer microfluidic devices. This paper emphasis the design, simulation and fabrication of straight channel micromixer, serpentine channel micromixer with and without quadrant shaped grooves to study the mixing behavior by the effect of structural dimensions of the microfluidic channel at different flow rates. The designed micromixers were tested with varying rates of flow such as 1, 10, 25, 50, 75 and 100 µL/min.

scholarly journals An Acoustic Spheroid-on-Chip Platform for Long-Term Culturing of 3D Cell Aggregates

2021 ◽  
Author(s):  
Arash Yahyazadeh Shourabi ◽  
Roozbeh Salajeghe ◽  
Maryam Barisam ◽  
Navid Kashaninejad
Keyword(s):  
Flow Rate ◽  
Cultured Cells ◽  
Proof Of Concept ◽  
Multicellular Spheroids ◽  
Lab On Chip ◽  
Main Challenge ◽  
Biological Studies ◽  
Finite Element Numerical Simulation ◽  
On Chip

Microfluidic lab-on-chip devices are widely being developed for chemical and biological studies. One of the most commonly used types of these chips is perfusion microwells for culturing multicellular spheroids. The main challenge in such systems is the formation of substantial necrotic and hypoxic zones within the cultured spheroids. Herein, we propose a novel acoustofluidic integrated platform to tackle this bottleneck problem. We show that such an approach enhances cell viability and shrinks necrotic and hypoxic zones in these spheroid-on-a-chip platforms without the need to increase the flow rate, leading to a significant reduction in costly reagents' consumption. Proof-of-concept, designing procedures, and finite element numerical simulation are discussed in details. Also, the effects of acoustic and hydrodynamic parameters on the cultured cells are investigated. The results show that by increasing acoustic boundary displacement amplitude (d0), the spheroid’s proliferating zone enlarges greatly. Moreover, it is shown that by implementing d0=0.5 nm, the required flow rate to maintain the necrotic zone below 13% will be decreased 12 times compared to non-acoustic chips.

scholarly journals A Lab‐On‐chip Tool for Rapid, Quantitative, and Stage‐selective Diagnosis of Malaria

2021 ◽  
pp. 2004101
Author(s):  
Marco Giacometti ◽  
Francesca Milesi ◽  
Pietro Lorenzo Coppadoro ◽  
Alberto Rizzo ◽  
Federico Fagiani ◽  
...  
Keyword(s):  
Lab On Chip ◽  
On Chip

scholarly journals Towards lab-on-chip ultrasensitive ethanol detection using photonic crystal waveguide operating in the mid infrared

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ali Rostamian ◽  
Ehsan Madadi-Kandjani ◽  
Hamed Dalir ◽  
Volker J. Sorger ◽  
Ray T. Chen
Keyword(s):  
Photonic Crystal ◽  
Slow Light ◽  
High Sensitivity ◽  
Guided Wave ◽  
Silicon On Insulator ◽  
Group Index ◽  
Photonic Crystal Waveguide ◽  
Mid Infrared ◽  
Lab On Chip ◽  
On Chip

Abstract Thanks to the unique molecular fingerprints in the mid-infrared spectral region, absorption spectroscopy in this regime has attracted widespread attention in recent years. Contrary to commercially available infrared spectrometers, which are limited by being bulky and cost-intensive, laboratory-on-chip infrared spectrometers can offer sensor advancements including raw sensing performance in addition to use such as enhanced portability. Several platforms have been proposed in the past for on-chip ethanol detection. However, selective sensing with high sensitivity at room temperature has remained a challenge. Here, we experimentally demonstrate an on-chip ethyl alcohol sensor based on a holey photonic crystal waveguide on silicon on insulator-based photonics sensing platform offering an enhanced photoabsorption thus improving sensitivity. This is achieved by designing and engineering an optical slow-light mode with a high group-index of n g  = 73 and a strong localization of modal power in analyte, enabled by the photonic crystal waveguide structure. This approach includes a codesign paradigm that uniquely features an increased effective path length traversed by the guided wave through the to-be-sensed gas analyte. This PIC-based lab-on-chip sensor is exemplary, spectrally designed to operate at the center wavelength of 3.4 μm to match the peak absorbance for ethanol. However, the slow-light enhancement concept is universal offering to cover a wide design-window and spectral ranges towards sensing a plurality of gas species. Using the holey photonic crystal waveguide, we demonstrate the capability of achieving parts per billion levels of gas detection precision. High sensitivity combined with tailorable spectral range along with a compact form-factor enables a new class of portable photonic sensor platforms when combined with integrated with quantum cascade laser and detectors.

Monitoring microbial growth on a microfluidic lab-on-chip with electrochemical impedance spectroscopic technique

2021 ◽  
Vol 23 (2) ◽  
Author(s):  
Subhan Shaik ◽  
Aarthi Saminathan ◽  
Deepak Sharma ◽  
Jagdish A Krishnaswamy ◽  
D Roy Mahapatra
Keyword(s):  
Microbial Growth ◽  
Electrochemical Impedance ◽  
Spectroscopic Technique ◽  
Lab On Chip ◽  
On Chip ◽  
Electrochemical Impedance Spectroscopic
Sign in / Sign up

Export Citation Format

Share Document