scholarly journals Characterization of the Siderurgy Slags as the Presence of Natural Radionuclides

Proceedings ◽  
2018 ◽  
Vol 2 (20) ◽  
pp. 1296
Author(s):  
Diogo T. Moreira ◽  
Arno H. Oliveira ◽  
Adriana S. M. Batista
Keyword(s):  
Construction Material ◽  
Natural Radionuclides ◽  
Steel Slag ◽  
Building Industry ◽  
High Quality ◽  
Mineral Aggregate ◽  
Steelmaking Slags ◽  
Preliminary Study ◽  
Metallurgical Processes

Present day steelmaking slags are being successfully used as a high quality mineral aggregate for the building industry. With this, it is of vital importance to be familiar with the technical significance of the secondary application of steel slag, because some steel slag might contain increased concentration of substances harmful to human health. In terms of steel slag impact on the environment, radionuclides are the least researched of all pollutants emitted from the metallurgical processes. This work presents the preliminary study about the presence of the uranium in siderurgy slag aggregates for the purpose of its use in the production of construction material. The results showed that this slag is free of uranium which brings greater security in its use as building material.

scholarly journals Characterization of Steel Slag Filler and Its Effect on Aging Resistance of Asphalt Mastic with Various Aging Methods

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 869
Author(s):  
Minghua Wei ◽  
Shaopeng Wu ◽  
Haiqin Xu ◽  
Hechuan Li ◽  
Chao Yang
Keyword(s):  
Particle Size ◽  
Surface Characterization ◽  
Steel Slag ◽  
Self Healing ◽  
Limestone Filler ◽  
Asphalt Mastic ◽  
Pore Characterization ◽  
Asphalt Mastics ◽  
Healing Property

Steel slag is the by-product of the steelmaking industry, the negative influences of which prompt more investigation into the recycling methods of steel slag. The purpose of this study is to characterize steel slag filler and study its feasibility of replacing limestone filler in asphalt concrete by evaluating the resistance of asphalt mastic under various aging methods. Firstly, steel slag filler, limestone filler, virgin asphalt, steel slag filler asphalt mastic and limestone filler asphalt mastic were prepared. Subsequently, particle size distribution, surface characterization and pore characterization of the fillers were evaluated. Finally, rheological property, self-healing property and chemical functional groups of the asphalt mastics with various aging methods were tested via dynamic shear rheometer and Fourier transform infrared spectrometer. The results show that there are similar particle size distributions, however, different surface characterization and pore characterization in the fillers. The analysis to asphalt mastics demonstrates how the addition of steel slag filler contributes to the resistance of asphalt mastic under the environment of acid and alkaline but is harmful under UV radiation especially. In addition, the pore structure in steel slag filler should be a potential explanation for the changing resistance of the asphalt mastics. In conclusion, steel slag filler is suggested to replace limestone filler under the environment of acid and alkaline, and environmental factor should be taken into consideration when steel slag filler is applied to replace natural fillers in asphalt mastic.

scholarly journals Editorial for Special Issue “Historical Mineral Pigments”

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 237
Author(s):  
Carolina Cardell ◽  
Jose Santiago Pozo-Antonio
Keyword(s):  
Chemical Characterization ◽  
Glass Enamel ◽  
Special Issue ◽  
High Quality ◽  
Physical Chemical ◽  
Scientific Disciplines ◽  
Natural And Synthetic

The physical–chemical characterization of natural and synthetic historical inorganic and mineral pigments, which may be found embedded in paintings (real or mock-ups), glass, enamel, ceramics, beads, tesserae, etc., as well as their alteration under different decay scenarios, is a demanding line of investigation. This field of research is now both well established and dynamic, as revealed by the numerous publications in high-quality journals of varied scientific disciplines. [...]

Preliminary Study of Alginates Extracted from Brown Algae (Sargassum sp.) Available in Madura Island as Composite Based Hydrogel Materials

2019 ◽  
Vol 964 ◽  
pp. 240-245 ◽  
Author(s):  
Amaliya Rasyida ◽  
Thalyta Rizkha Pradipta ◽  
Sigit Tri Wicaksono ◽  
Vania Mitha Pratiwi ◽  
Yeny Widya Rakhmawati
Keyword(s):  
Sodium Alginate ◽  
Brown Algae ◽  
Extraction Process ◽  
Composition Analysis ◽  
3D Printer ◽  
X Ray Diffraction ◽  
X Ray ◽  
3D Printed ◽  
Preliminary Study

Utilization of brown algae especially in Madura, where it’s close to Surabaya, only limited for food. This become a reference for developing and increasing the potential of this algae by extracting one of the ingredients, namely alginate. This paper deals with the characterization of sodium alginate extracted from sargassum sp. using modified-purified calcium routes. The extracted sodium alginate will be further used as composite hydrogel materials and compared with commercial sodium alginate. Hereafter, the synthesized composite is expected to be bio-ink for 3d printer. Chemical composition analysis were analyzed using X-Ray Fluorosense (XRF) followed by Fourier-transform infrared spectroscopy (FTIR) analysis to identify the functional group of composite and X-Ray Diffraction (XRD). Furthermore, viscosity bath is performed to compare the viscosity of extracted and commercial one. The result shows that modified-purified calcium routes in the extraction process of sodium alginate is desirable for improving their properties. Interestingly enough, with the goal of using it as bio-ink in 3d printed fabrication, the synthesized composite shows viscosity, 300 cSt, which meets the criteria for bio-ink in 3d printer.

Growth and Characterization of High Quality Epitaxial GaN on ZnO(0001) by Reactive Molecular Epitaxy

1998 ◽  
Vol 264-268 ◽  
pp. 1201-1204
Author(s):  
F. Hamdani ◽  
M. Yeadon ◽  
David John Smith ◽  
H. Tang ◽  
W. Kim ◽  
...  
Keyword(s):  
High Quality
Sign in / Sign up

Export Citation Format

Share Document