Evaluation of the Snow Albedo Retrieved from the Snow Kernel Improved the Ross-Roujean BRDF Model

2019 ◽  
Vol 11 (13) ◽  
pp. 1611 ◽  
Author(s):  
Ding ◽  
Jiao ◽  
Dong ◽  
Zhang ◽  
Peltoniemi ◽  
...  

The original kernel-driven bidirectional reflectance distribution function (BRDF) models were developed based on soil-vegetation systems. To further improve the ability of the models to characterize the snow surface scattering properties, a snow kernel was derived from the asymptotic radiative transfer (ART) model and used in the kernel-driven BRDF model framework. However, there is a need to further evaluate the influence of using this snow kernel to improve the original kernel-driven models in snow albedo retrieval applications. The aim of this study is to perform such an evaluation using a variety of snow BRDF data. The RossThick-Roujean (RTR) model is used as a framework for taking in the new snow kernel (hereafter named the RTS model) since the Roujean geometric-optical (GO) kernel captures a neglectable hotspot effect and represents a more prominent dome-shaped BRDF, especially at a small solar zenith angle (SZA). We obtained the following results: (1) The RTR model has difficulties in reconstructing the snow BRDF shape, especially at large SZAs, which tends to underestimate the reflectance in the forward direction and overestimate reflectance in the backward direction for various data sources. In comparison, the RTS model performs very well in fitting snow BRDF data and shows high accuracy for all data. (2) The RTR model retrieved snow albedos at SZAs = 30°–70° are underestimated by 0.71% and 0.69% in the red and near-infrared (NIR) bands, respectively, compared with the simulation results of the bicontinuous photon tracking (bic-PT) model, which serve as “real” values. However, the albedo retrieved by the RTS model is significantly improved and generally agrees well with the simulation results of the bic-PT model, although the improved model still somewhat underestimates the albedo by 0.01% in the red band and overestimates the albedo by 0.05% in the NIR band, respectively, at SZAs = 30°–70°, which may be negligible. (3) The albedo derived by these two models shows a high correlation (R2 > 0.9) between the field-measured and Polarization and Directionality of the Earth's Reflectances (POLDER) data, especially for the black-sky albedo. However, the albedo derived using the RTR model is significantly underestimated compared with the RTS model. The RTR model underestimates the black-sky albedo (white-sky albedo) retrievals by 0.62% (1.51%) and 0.93% (2.08%) in the red and NIR bands, respectively, for the field-measured data. The shortwave black-sky and white-sky albedos derived using the RTR model for the POLDER data are underestimated by 1.43% and 1.54%, respectively, compared with the RTS model. These results indicate that the snow kernel in the kernel-driven BRDF model frame is more accurate in snow albedo retrievals and has the potential for application in the field of the regional and global energy budget.

2018 ◽  
Vol 10 (9) ◽  
pp. 1348 ◽  
Author(s):  
Damian Wierzbicki ◽  
Michal Kedzierski ◽  
Anna Fryskowska ◽  
Janusz Jasinski

Imaging from low altitudes is nowadays commonly used in remote sensing and photogrammetry. More and more often, in addition to acquiring images in the visible range, images in other spectral ranges, e.g., near infrared (NIR), are also recorded. During low-altitude photogrammetric studies, small-format images of large coverage along and across the flight route are acquired that provide information about the imaged objects. The novelty presented in this research is the use of the modified method of the dark-object subtraction technique correction with a modified Walthall’s model for correction of images obtained from a low altitude. The basic versions of these models have often been used to radiometric correction of satellite imagery and classic aerial images. However, with the increasing popularity of imaging from low altitude (in particular in the NIR range), it has also become necessary to perform radiometric correction for this type of images. The radiometric correction of images acquired from low altitudes is important from the point of view of eliminating disturbances which might reduce the capabilities of image interpretation. The radiometric correction of images acquired from low altitudes should take into account the influence of the atmosphere but also the geometry of illumination, which is described by the bidirectional reflectance distribution function (BRDF). This paper presents a method of radiometric correction for unmanned aerial vehicle (UAV) NIR images. The study presents a method of low-altitude image acquisition and a fusion of the method of the dark-object subtraction technique correction with a modified Walthall’s model. The proposed solution performs the radiometric correction of images acquired in the NIR range with the root mean square error (RMSE) value not exceeding 10% with respect to the original images. The obtained results confirm that the proposed method will provide effective compensation of radiometric disturbances in UAV images.


Author(s):  
Ming Xie ◽  
Xiaochen Xie ◽  
Huanhuan Zhao ◽  
Xiaochun Wang ◽  
Heping Tan

As Bidirectional Reflectance Distribution Function (BRDF) can describe the reflection and scattering characteristic of solid material surface better, an experiment which is based on the basic concept of BRDF and combined with the effects on surface profile from surface wettability theory and wet condition, was carried out for comparison. Using the white standard plate as a single sample for reference on a self-built experiment table, the BRDF values of the surface of three exterior decorative materials for buildings, namely granite, coated glass and Ethylene-Propylene-Diene-Monomer (EPDM), were measured under the conditions of dry and wet, on two wavebands (visible light band 0.6328μm and near infrared band 1.34μm) and at different incident angles. After the comparison of distribution, the results indicate that if forming stable water-film, which has the function of translucent smooth interface, above the surface of the three materials, their BRDF values will demonstrate obvious specular reflection component to different degree.


2002 ◽  
Vol 34 ◽  
pp. 74-80 ◽  
Author(s):  
Tomonori Tanikawa ◽  
Teruo Aoki ◽  
Fumihiko Nishio

AbstractAlgorithms to retrieve the snow grain-size and the concentration of snow impurities were developed using a theoretical bidirectional reflectance distribution function (BRDF) model of the snow surface. In this model, snow grains are assumed to be independent spherical ice particles, and the BRDF is calculated with multiple scattering by snow particles. Using these algorithms, the snow grain-size and snow impurities were retrieved from Airborne Multispectral Scanner (AMSS) images at the visible (λ = 0.545 μm) and near-infrared (λ =1.24,1.64 and 2.23 μm) wavelengths observed over the flat snowfield in eastern Hokkaido, Japan, in February 1998. The estimated snow grain-size and impurities were consistent with the results of in situ measurements on the snow surface. For snow grain-size, measured reflectances in the different near-infrared AMSS channels indicated grain-size differences in the vertical profile of the snowpack.


2017 ◽  
Vol 31 (2) ◽  
pp. 203-218 ◽  
Author(s):  
Manoj M. Lunagaria ◽  
Haridas R. Patel

Abstract The canopy structure of wheat changes significantly with growth stages and leads to changes in reflectance anisotropy. Bidirectional reflectance distribution function characterises the reflectance anisotropy of the targets, which can be approximated. Spectrodirectional reflectance measurements on wheat crop were acquired using a field goniometer system. The bidirectional reflectance spectra were acquired at 54 view angles to cover the hemispheric span up to 60° view zenith. The observations were made during early growth stages till maturity of the crop. The anisotropy was not constant for all wavelengths and anisotropic factors clearly revealed spectral dependence, which was more pronounced in near principal plane. In near infrared, wheat canopy expressed less reflectance anisotropy because of higher multiple scattering. The broad hotspot signature was noticeable in reflectance of canopy whenever view and solar angles were close. Distinct changes in bidirectional reflectance distribution function were observed during booting to flowering stages as the canopy achieves more uniformity, height and head emergence. The function clearly reveals bowl shape during heading to early milking growth stages of the crop. Late growth stages show less prominent gap and shadow effects. Anisotropy index revealed that wheat exhibits changes in reflectance anisotropy with phenological development and with spectral bands.


2021 ◽  
Author(s):  
Hiroshi Ohno ◽  
Takahiro Kamikawa

AbstractThe bidirectional reflectance distribution function (BRDF) that describes an angle-resolved distribution of surface reflectance is available for characterizing surface properties of a material. A one-shot BRDF imaging system can capture an in-plane color mapping of light direction extracted from a surface BRDF distribution. A surface roughness identification method is then proposed here using the imaging system. A difference between surface properties of a matt paper and a glossy paper is experimentally shown to be detected using the method. A surface reconstruction method of an axisymmetric micro-object using the imaging system is also proposed here. The imaging system experimentally shows that it can reconstruct an axisymmetric aluminium cone surface with a height of 37 μm.


Sign in / Sign up

Export Citation Format

Share Document