scholarly journals Topology Reconstruction of BIM Wall Objects from Point Cloud Data

2020 ◽  
Vol 12 (11) ◽  
pp. 1800 ◽  
Author(s):  
Maarten Bassier ◽  
Maarten Vergauwen
Keyword(s):  
Point Cloud ◽  
Point Clouds ◽  
Evaluation Framework ◽  
Information Modeling ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Current State ◽  
Building Information ◽  
Popular Subject ◽  
Best Fit

The processing of remote sensing measurements to Building Information Modeling (BIM) is a popular subject in current literature. An important step in the process is the enrichment of the geometry with the topology of the wall observations to create a logical model. However, this remains an unsolved task as methods struggle to deal with the noise, incompleteness and the complexity of point cloud data of building scenes. Current methods impose severe abstractions such as Manhattan-world assumptions and single-story procedures to overcome these obstacles, but as a result, a general data processing approach is still missing. In this paper, we propose a method that solves these shortcomings and creates a logical BIM model in an unsupervised manner. More specifically, we propose a connection evaluation framework that takes as input a set of preprocessed point clouds of a building’s wall observations and compute the best fit topology between them. We transcend the current state of the art by processing point clouds of both straight, curved and polyline-based walls. Also, we consider multiple connection types in a novel reasoning framework that decides which operations are best fit to reconstruct the topology of the walls. The geometry and topology produced by our method is directly usable by BIM processes as it is structured conform the IFC data structure. The experimental results conducted on the Stanford 2D-3D-Semantics dataset (2D-3D-S) show that the proposed method is a promising framework to reconstruct complex multi-story wall elements in an unsupervised manner.

scholarly journals IFCWALL RECONSTRUCTION FROM UNSTRUCTURED POINT CLOUDS

2018 ◽  
Vol IV-2 ◽  
pp. 33-39 ◽  
Author(s):  
M. Bassier ◽  
R. Klein ◽  
B. Van Genechten ◽  
M. Vergauwen
Keyword(s):  
Point Cloud ◽  
Input Data ◽  
Initial Point ◽  
Point Clouds ◽  
Information Modeling ◽  
Point Cloud Data ◽  
Ongoing Research ◽  
Cloud Data ◽  
Building Information ◽  
Wall Geometry

The automated reconstruction of Building Information Modeling (BIM) objects from point cloud data is still ongoing research. A key aspect is the creation of accurate wall geometry as it forms the basis for further reconstruction of objects in a BIM. After segmenting and classifying the initial point cloud, the labelled segments are processed and the wall topology is reconstructed. However, the preocedure is challenging due to noise, occlusions and the complexity of the input data.<br>In this work, a method is presented to automatically reconstruct consistent wall geometry from point clouds. More specifically, the use of room information is proposed to aid the wall topology creation. First, a set of partial walls is constructed based on classified planar primitives. Next, the rooms are identified using the retrieved wall information along with the floors and ceilings. The wall topology is computed by the intersection of the partial walls conditioned on the room information. The final wall geometry is defined by creating IfcWallStandardCase objects conform the IFC4 standard. The result is a set of walls according to the as-built conditions of a building. The experiments prove that the used method is a reliable framework for wall reconstruction from unstructured point cloud data. Also, the implementation of room information reduces the rate of false positives for the wall topology. Given the walls, ceilings and floors, 94% of the rooms is correctly identified. A key advantage of the proposed method is that it deals with complex rooms and is not bound to single storeys.

scholarly journals Point Cloud vs. Mesh Features for Building Interior Classification

2020 ◽  
Vol 12 (14) ◽  
pp. 2224 ◽  
Author(s):  
Maarten Bassier ◽  
Maarten Vergauwen ◽  
Florent Poux
Keyword(s):  
Point Cloud ◽  
Point Clouds ◽  
Information Modeling ◽  
Point Cloud Data ◽  
3D Mesh ◽  
Cloud Data ◽  
And Topology ◽  
Building Information ◽  
Building Components ◽  
The Impact

Interpreting 3D point cloud data of the interior and exterior of buildings is essential for automated navigation, interaction and 3D reconstruction. However, the direct exploitation of the geometry is challenging due to inherent obstacles such as noise, occlusions, sparsity or variance in the density. Alternatively, 3D mesh geometries derived from point clouds benefit from preprocessing routines that can surmount these obstacles and potentially result in more refined geometry and topology descriptions. In this article, we provide a rigorous comparison of both geometries for scene interpretation. We present an empirical study on the suitability of both geometries for the feature extraction and classification. More specifically, we study the impact for the retrieval of structural building components in a realistic environment which is a major endeavor in Building Information Modeling (BIM) reconstruction. The study runs on segment-based structuration of both geometries and shows that both achieve recognition rates over 75% F1 score when suitable features are used.

scholarly journals Modeling and Processing of Smart Point Clouds of Cultural Relics with Complex Geometries

2021 ◽  
Vol 10 (9) ◽  
pp. 617
Author(s):  
Su Yang ◽  
Miaole Hou ◽  
Ahmed Shaker ◽  
Songnian Li
Keyword(s):  
Point Cloud ◽  
Semantic Information ◽  
Point Clouds ◽  
Information Modeling ◽  
Complex Geometries ◽  
3D Point Cloud ◽  
Point Cloud Data ◽  
Modeling Framework ◽  
Cloud Data ◽  
Cultural Relics

The digital documentation of cultural relics plays an important role in archiving, protection, and management. In the field of cultural heritage, three-dimensional (3D) point cloud data is effective at expressing complex geometric structures and geometric details on the surface of cultural relics, but lacks semantic information. To elaborate the geometric information of cultural relics and add meaningful semantic information, we propose a modeling and processing method of smart point clouds of cultural relics with complex geometries. An information modeling framework for complex geometric cultural relics was designed based on the concept of smart point clouds, in which 3D point cloud data are organized through the time dimension and different spatial scales indicating different geometric details. The proposed model allows smart point clouds or a subset to be linked with semantic information or related documents. As such, this novel information modeling framework can be used to describe rich semantic information and high-level details of geometry. The proposed information model not only expresses the complex geometric structure of the cultural relics and the geometric details on the surface, but also has rich semantic information, and can even be associated with documents. A case study of the Dazu Thousand-Hand Bodhisattva Statue, which is characterized by a variety of complex geometries, reveals that our proposed framework is capable of modeling and processing the statue with excellent applicability and expansibility. This work provides insights into the sustainable development of cultural heritage protection globally.

scholarly journals CLUSTERING OF WALL GEOMETRY FROM UNSTRUCTURED POINT CLOUDS

2019 ◽  
Vol XLII-2/W9 ◽  
pp. 101-108 ◽  
Author(s):  
M. Bassier ◽  
M. Vergauwen
Keyword(s):  
Point Cloud ◽  
Conditional Random Field ◽  
Initial Point ◽  
Point Clouds ◽  
The Body ◽  
Information Modeling ◽  
Point Cloud Data ◽  
Ongoing Research ◽  
Cloud Data ◽  
Wall Geometry

<p><strong>Abstract.</strong> The automated reconstruction of Building Information Modeling (BIM) objects from point cloud data is still ongoing research. A key aspect is retrieving the proper observations for each object. After segmenting and classifying the initial point cloud, the labeled segments should be clustered according to their respective objects. However, this procedure is challenging due to noise, occlusions and the associativity between different objects. This is especially important for wall geometry as it forms the basis for further BIM reconstruction.</p><p> In this work, a method is presented to automatically group wall segments derived from point clouds according to the proper walls of a building. More specifically, a Conditional Random Field is employed that evaluates the context of each observation in order to determine which wall it belongs too. The emphasis is on the clustering of highly associative walls as this topic currently is a gap in the body of knowledge. First a set of classified planar primitives is obtained using algorithms developed in prior work. Next, both local and contextual features are extracted based on the nearest neighbors and a number of seeds that are heuristically determined. The final wall clusters are then computed by decoding the graph and thus the most likely configuration of the observations. The experiments prove that the used method is a promising framework for wall clustering from unstructured point cloud data. Compared to a conventional region growing method, the proposed method significantly reduces the rate of false positives, resulting in better wall clusters. A key advantage of the proposed method is its capability of dealing with complex wall geometry in entire buildings opposed to the presented methods in current literature.</p>

scholarly journals BIM RECONSTRUCTION: AUTOMATED PROCEDURAL MODELING FROM POINT CLOUD DATA

2019 ◽  
Vol XLII-2/W17 ◽  
pp. 53-60
Author(s):  
M. Bassier ◽  
L. Mattheuwsen ◽  
M. Vergauwen
Keyword(s):  
Point Cloud ◽  
Reconstruction Algorithm ◽  
Information Modeling ◽  
Data Sets ◽  
Point Cloud Data ◽  
Ongoing Research ◽  
Cloud Data ◽  
Structure Information ◽  
Wide Range ◽  
Building Information

Abstract. The reconstruction of Building Information Modeling objects for as-built modeling is currently the subject of ongoing research. A popular method is to extract structure information from point cloud data to create a set of parametric objects. This requires the interpretation of the point cloud data which currently is a manual and labor intensive procedure. Automated processes have to cope with excessive occlusions and clutter in the data sets. To create an as-built BIM, it is vital to reconstruct the building’s structure i.e. wall geometry prior to the reconstruction of other objects.In this work, a novel method is presented to automatically reconstruct as-built BIM for generic buildings. We presented an unsupervised method that procedurally models the geometry of the walls based on point cloud data. A bottom-up process is defined where consecutively higher level information is extracted from the point cloud data using pre-trained machine learning models. Prior to the reconstruction, the data is segmented, classified and clustered to retrieve all the available observations of the walls. The resulting geometry is processed by the reconstruction algorithm. First, the necessary information is extracted from the observations for the creation of parametric solid objects. Subsequently, the final walls are created by updating their topology. The method is tested on a variety of scenes and shows promising results to reliably and accurately create as-built models. The accuracy of the generated geometry is similar to the precision of expert modelers. A key advantage is that that the algorithm creates Revit and Rhino native objects which makes the geometry directly applicable to a wide range of applications.

scholarly journals Point clouds for use in building information models (BIM)

2021 ◽  
Vol 64 (04) ◽  
pp. 594-613
Author(s):  
Robert Klinc ◽  
Uroš Jotanović ◽  
Klemen Kregar
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
User Interaction ◽  
Point Clouds ◽  
Point Cloud Data ◽  
Material World ◽  
Cloud Data ◽  
Digital World ◽  
Starting Point ◽  
Building Information

The use of point clouds in extracting data for building information modelling (BIM) has become common recently. Managers of older buildings are working to centralise information. Documentation about mechanical installations, plumbing, electricity, and previous interventions is often stored on scattered media, frequently still on paper. In the transformation of the material world into the digital world, the point cloud is the starting point, containing information about the material world obtained by various means such as photogrammetry, terrestrial or aerial laser scanning. Manual BIM modelling for management, maintenance and future use is a time-consuming and error-prone process. We would like to automate this process and avoid these errors. Recently, there have been developed an increasing number of stand-alone programmes and add-ons that provide automated, fast, and more accurate modelling based on point cloud data. In this paper we present an investigation into the possibilities for automating the creation of BIM models from point cloud data. The result is a semi-automated process for modelling individual BIM elements, which we have tested on specific examples of modelling individual elements (walls, pipes, and columns). We note that despite the automation of the process, a high level of user interaction is still required to produce good quality models.

Registration and Fusion of UAV LiDAR System Sequence Images and Laser Point Clouds

2020 ◽  
Author(s):  
Jiayong Yu ◽  
Longchen Ma ◽  
Maoyi Tian, ◽  
Xiushan Lu
Keyword(s):  
Point Cloud ◽  
Image Data ◽  
Point Clouds ◽  
Optical Image ◽  
Point Cloud Data ◽  
Feature Points ◽  
Lidar System ◽  
Registration Accuracy ◽  
Cloud Data ◽  
Intensity Image

The unmanned aerial vehicle (UAV)-mounted mobile LiDAR system (ULS) is widely used for geomatics owing to its efficient data acquisition and convenient operation. However, due to limited carrying capacity of a UAV, sensors integrated in the ULS should be small and lightweight, which results in decrease in the density of the collected scanning points. This affects registration between image data and point cloud data. To address this issue, the authors propose a method for registering and fusing ULS sequence images and laser point clouds, wherein they convert the problem of registering point cloud data and image data into a problem of matching feature points between the two images. First, a point cloud is selected to produce an intensity image. Subsequently, the corresponding feature points of the intensity image and the optical image are matched, and exterior orientation parameters are solved using a collinear equation based on image position and orientation. Finally, the sequence images are fused with the laser point cloud, based on the Global Navigation Satellite System (GNSS) time index of the optical image, to generate a true color point cloud. The experimental results show the higher registration accuracy and fusion speed of the proposed method, thereby demonstrating its accuracy and effectiveness.

scholarly journals Multi-Dimensional Underwater Point Cloud Detection Based on Deep Learning

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 884
Author(s):  
Chia-Ming Tsai ◽  
Yi-Horng Lai ◽  
Yung-Da Sun ◽  
Yu-Jen Chung ◽  
Jau-Woei Perng
Keyword(s):  
Deep Learning ◽  
Point Cloud ◽  
Three Dimensional ◽  
Point Clouds ◽  
Training Data ◽  
Network Architectures ◽  
Point Cloud Data ◽  
Data Types ◽  
Raw Data ◽  
Cloud Data

Numerous sensors can obtain images or point cloud data on land, however, the rapid attenuation of electromagnetic signals and the lack of light in water have been observed to restrict sensing functions. This study expands the utilization of two- and three-dimensional detection technologies in underwater applications to detect abandoned tires. A three-dimensional acoustic sensor, the BV5000, is used in this study to collect underwater point cloud data. Some pre-processing steps are proposed to remove noise and the seabed from raw data. Point clouds are then processed to obtain two data types: a 2D image and a 3D point cloud. Deep learning methods with different dimensions are used to train the models. In the two-dimensional method, the point cloud is transferred into a bird’s eye view image. The Faster R-CNN and YOLOv3 network architectures are used to detect tires. Meanwhile, in the three-dimensional method, the point cloud associated with a tire is cut out from the raw data and is used as training data. The PointNet and PointConv network architectures are then used for tire classification. The results show that both approaches provide good accuracy.

Sign in / Sign up

Export Citation Format

Share Document