scholarly journals Estimating Land Surface Temperature from Satellite Passive Microwave Observations with the Traditional Neural Network, Deep Belief Network, and Convolutional Neural Network

2020 ◽  
Vol 12 (17) ◽  
pp. 2691 ◽  
Author(s):  
Shaofei Wang ◽  
Ji Zhou ◽  
Tianjie Lei ◽  
Hua Wu ◽  
Xiaodong Zhang ◽  
...  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Surface Temperature ◽  
Convolutional Neural Network ◽  
Spatial Resolution ◽  
Air Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Passive Microwave ◽  
Mean Square

Neural networks, especially the latest deep learning, have exhibited good ability in estimating surface parameters from satellite remote sensing. However, thorough examinations of neural networks in the estimation of land surface temperature (LST) from satellite passive microwave (MW) observations are still lacking. Here, we examined the performances of the traditional neural network (NN), deep belief network (DBN), and convolutional neural network (CNN) in estimating LST from the AMSR-E and AMSR2 data over the Chinese landmass. The examinations were based on the same training set, validation set, and test set extracted from 2003, 2004, and 2009, respectively, for AMSR-E with a spatial resolution of 0.25°. For AMSR2, the three sets were extracted from 2013, 2014, and 2016 with a spatial resolution of 0.1°, respectively. MODIS LST played the role of “ground truth” in the training, validation, and testing. The examination results show that CNN is better than NN and DBN by 0.1–0.4 K. Different combinations of input parameters were examined to get the best combinations for the daytime and nighttime conditions. The best combinations are the brightness temperatures (BTs), NDVI, air temperature, and day of the year (DOY) for the daytime and BTs and air temperature for the nighttime. By adding three and one easily obtained parameters on the basis of BTs, the accuracies of LST estimates can be improved by 0.8 K and 0.3 K for the daytime and nighttime conditions, respectively. Compared with the MODIS LST, the CNN LST estimates yielded root-mean-square differences (RMSDs) of 2.19–3.58 K for the daytime and 1.43–2.14 K for the nighttime for diverse land cover types for AMSR-E. Validation against the in-situ LSTs showed that the CNN LSTs yielded root-mean-square errors of 2.10–4.72 K for forest and cropland sites. Further intercomparison indicated that ~50% of the CNN LSTs were closer to the MODIS LSTs than ESA’s GlobTemperature AMSR-E LSTs, and the average RMSDs of the CNN LSTs were less than 3 K over dense vegetation compared to NASA’s global land parameter data record air temperatures. This study helps better the understanding of the use of neural networks for estimating LST from satellite MW observations.

Estimating Land Surface Temperature from AMSR-E and AMSR2 Data with Convolutional Neural Network

2021 ◽  
Author(s):  
Shaofei Wang ◽  
Ji Zhou ◽  
Xiaodong Zhang ◽  
Zichun Jin
Keyword(s):  
Neural Network ◽  
Remote Sensing ◽  
Neural Networks ◽  
Surface Temperature ◽  
Convolutional Neural Network ◽  
Root Mean Square ◽  
Air Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Mean Square

<p>Land surface temperature (LST) is a key factor in earth–atmosphere interactions and an important indicator for monitoring environmental changes and energy balance on Earth's surface. Thermal infrared (TIR) remote sensing can only obtain valid observations under clear-sky conditions, which results in the discontinuities of the LST time series. In contrast, passive microwave (PMW) remote sensing can help estimate the LST under cloudy conditions and the LST generated by PMW observations is an important input parameter for generating medium-resolution (e.g., 1km) all-weather LST. Neural networks, especially the latest deep learning, have exhibited good ability in estimating surface parameters from satellite remote sensing. However, thorough examinations of neural networks in the estimation of LST from satellite PMW observations are still lacking. In this study, we examined the performances of the traditional neural network (NN), deep belief network (DBN), and convolutional neural network (CNN) in estimating LST from the Advanced Microwave Scanning Radiometer for EOS (AMSR-E) and Advanced Microwave Scanning Radiometer 2 (AMSR2) data over the Chinese landmass. The examination results show that CNN is better than NN and DBN by 0.1–0.4 K. Different combinations of input parameters were examined to get the best combinations for the daytime and nighttime conditions. The best combinations are the brightness temperatures (BTs), NDVI, air temperature, and day of the year (DOY) for the daytime and BTs and air temperature for the nighttime. Compared with the MODIS LST, the CNN LST estimates yielded root-mean-square differences (RMSDs) of 2.19–3.58 K for the daytime and 1.43–2.14 K for the nighttime for diverse land cover types for AMSR-E. Validation based on the in-situ LST demonstrates that the CNN LST yielded root-mean-square errors of 2.10–5.34 K and the error analysis confirms that the main reason for the errors is the scale mismatching between the ground stations and the MW pixels. This study helps better the understanding of the use of neural networks for estimating LST from satellite MW observations.</p>

scholarly journals Deep Learning Convolutional Neural Network for the Retrieval of Land Surface Temperature from AMSR2 Data in China

Sensors ◽  
2019 ◽  
Vol 19 (13) ◽  
pp. 2987 ◽  
Author(s):  
Jiancan Tan ◽  
Nusseiba NourEldeen ◽  
Kebiao Mao ◽  
Jiancheng Shi ◽  
Zhaoliang Li ◽  
...  
Keyword(s):  
Neural Network ◽  
Surface Temperature ◽  
Convolutional Neural Network ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Measurement Data ◽  
Retrieval Algorithm ◽  
Observation Data ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Better Than

A convolutional neural network (CNN) algorithm was developed to retrieve the land surface temperature (LST) from Advanced Microwave Scanning Radiometer 2 (AMSR2) data in China. Reference data were selected using the Moderate Resolution Imaging Spectroradiometer (MODIS) LST product to overcome the problem related to the need for synchronous ground observation data. The AMSR2 brightness temperature (TB) data and MODIS surface temperature data were randomly divided into training and test datasets, and a CNN was constructed to simulate passive microwave radiation transmission to invert the surface temperature. The twelve V/H channel combinations (7.3, 10.65, 18.7, 23.8, 36.5, 89 GHz) resulted in the most stable and accurate CNN retrieval model. Vertical polarizations performed better than horizontal polarizations; however, because CNNs rely heavily on large amounts of data, the combination of vertical and horizontal polarizations performed better than a single polarization. The retrievals in different regions indicated that the CNN accuracy was highest over large bare land areas. A comparison of the retrieval results with ground measurement data from meteorological stations yielded R2 = 0.987, RMSE = 2.69 K, and an average relative error of 2.57 K, which indicated that the accuracy of the CNN LST retrieval algorithm was high and the retrieval results can be applied to long-term LST sequence analysis in China.

scholarly journals Reconstructing Geostationary Satellite Land Surface Temperature Imagery Based on a Multiscale Feature Connected Convolutional Neural Network

2019 ◽  
Vol 11 (3) ◽  
pp. 300 ◽  
Author(s):  
Penghai Wu ◽  
Zhixiang Yin ◽  
Hui Yang ◽  
Yanlan Wu ◽  
Xiaoshuang Ma
Keyword(s):  
Neural Network ◽  
Missing Data ◽  
Surface Temperature ◽  
Convolutional Neural Network ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Missing Values ◽  
Geostationary Satellite ◽  
Reconstruction Methods ◽  
Highly Nonlinear

Geostationary satellite land surface temperature (GLST) data are important for various dynamic environmental and natural resource applications for terrestrial ecosystems. Due to clouds, shadows, and other atmospheric conditions, the derived LSTs are often missing a large number of values. Reconstructing the missing values is essential for improving the usability of the geostationary satellite LST data. However, current reconstruction methods mainly aim to fill the values of a small number of invalid pixels with many valid pixels, which can provide useful land surface temperature values. When the missing data extent becomes large, the reconstruction effect will worsen because the relationship between different spatiotemporal geostationary satellite LSTs is complex and highly nonlinear. Inspired by the superiority of the deep convolutional neural network (CNN) in solving highly nonlinear and dynamic problems, a multiscale feature connection CNN model is proposed to fill missing LSTs with large missing regions. The proposed method has been tested on both FengYun-2G and Meteosat Second Generation-Spinning Enhanced Visible and InfraRed Imager geostationary satellite LST datasets. The results of simulated and actual experiments show that the proposed method is accurate to within about 1 °C, with 70% missing data rates. This is feasible and effective for large regions of LST reconstruction tasks.

scholarly journals Estimation of Climatologies of Average Monthly Air Temperature over Mongolia Using MODIS Land Surface Temperature (LST) Time Series and Machine Learning Techniques

2019 ◽  
Vol 11 (21) ◽  
pp. 2588 ◽  
Author(s):  
Otgonbayar ◽  
Atzberger ◽  
Mattiuzzi ◽  
Erdenedalai
Keyword(s):  
Time Series ◽  
Surface Temperature ◽  
Spatial Resolution ◽  
Air Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Near Surface ◽  
Monthly Average ◽  
Modis Land Surface Temperature ◽  
Weather Stations

The objective of this research was to develop a robust statistical model to estimate climatologies (2002–2017) of monthly average near-surface air temperature (Ta) over Mongolia using Moderate Resolution Imaging Spectroradiometer (MODIS) land surface temperature (LST) time series products and terrain parameters. Two regression models were analyzed in this study linking automatic weather station data (Ta) with Earth observation (EO) images: partial least squares (PLS) and random forest (RF). Both models were trained to predict Ta climatologies for each of the twelve months, using up to 17 variables as predictors. The models were applied to the entire land surface of Mongolia, the eighteenth largest but most sparsely populated country in the world. Twelve of the predictor variables were derived from the LST time series products of the Terra MODIS satellite. The LST MOD11A2 (collection 6) products provided thermal information at a spatial resolution of 1 km and with 8-day temporal resolution from 2002 to 2017. Three terrain variables, namely, elevation, slope, and aspect, were extracted using a Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM), and two variables describing the geographical location of weather stations were extracted from vector data. For training, a total of 8544 meteorological data points from 63 automatic weather stations were used covering the same period as MODIS LST products. The PLS regression resulted in a coefficient of determination (R2) between 0.74 and 0.87 and a root-mean-square error (RMSE) from 1.20 °C to 2.19 °C between measured and estimated monthly Ta. The non-linear RF regression yielded even more accurate results with R2 in the range from 0.82 to 0.95 and RMSE from 0.84 °C to 1.93 °C. Using RF, the two best modeled months were July and August and the two worst months were January and February. The four most predictive variables were day/nighttime LST, elevation, and latitude. Using the developed RF models, spatial maps of the monthly average Ta at a spatial resolution of 1 km were generated for Mongolia (~1566 × 106 km2). This spatial dataset might be useful for various environmental applications. The method is transparent and relatively easy to implement.

Spatial Hotspot Analysis of Bucharest’s Urban Heat Island (UHI) Using Modis Data

2018 ◽  
Vol 18 (1) ◽  
pp. 14-22 ◽  
Author(s):  
Georgiana Grigoraș ◽  
Bogdan Urițescu
Keyword(s):  
Surface Temperature ◽  
Air Temperature ◽  
Land Surface Temperature ◽  
Hot Spots ◽  
Land Surface ◽  
Hot Spot ◽  
Monitoring Network ◽  
Residential Areas ◽  
Hotspot Analysis ◽  
The City

Abstract The aim of the study is to find the relationship between the land surface temperature and air temperature and to determine the hot spots in the urban area of Bucharest, the capital of Romania. The analysis was based on images from both moderate-resolution imaging spectroradiometer (MODIS), located on both Terra and Aqua platforms, as well as on data recorded by the four automatic weather stations existing in the endowment of The National Air Quality Monitoring Network, from the summer of 2017. Correlation coefficients between land surface temperature and air temperature were higher at night (0.8-0.87) and slightly lower during the day (0.71-0.77). After the validation of satellite data with in-situ temperature measurements, the hot spots in the metropolitan area of Bucharest were identified using Getis-Ord spatial statistics analysis. It has been achieved that the “very hot” areas are grouped in the center of the city and along the main traffic streets and dense residential areas. During the day the "very hot spots” represent 33.2% of the city's surface, and during the night 31.6%. The area where the mentioned spots persist, falls into the "very hot spot" category both day and night, it represents 27.1% of the city’s surface and it is mainly represented by the city center.

Sign in / Sign up

Export Citation Format

Share Document