scholarly journals The Salinity Pilot-Mission Exploitation Platform (Pi-MEP): A Hub for Validation and Exploitation of Satellite Sea Surface Salinity Data

2021 ◽  
Vol 13 (22) ◽  
pp. 4600
Author(s):  
Sébastien Guimbard ◽  
Nicolas Reul ◽  
Roberto Sabia ◽  
Sylvain Herlédan ◽  
Ziad El Khoury Hanna ◽  
...  

The Pilot-Mission Exploitation Platform (Pi-MEP) for salinity is an ESA initiative originally meant to support and widen the uptake of Soil Moisture and Ocean Salinity (SMOS) mission data over the ocean. Starting in 2017, the project aims at setting up a computational web-based platform focusing on satellite sea surface salinity data, supporting studies on enhanced validation and scientific process over the ocean. It has been designed in close collaboration with a dedicated science advisory group in order to achieve three main objectives: gathering all the data required to exploit satellite sea surface salinity data, systematically producing a wide range of metrics for comparing and monitoring sea surface salinity products’ quality, and providing user-friendly tools to explore, visualize and exploit both the collected products and the results of the automated analyses. The Salinity Pi-MEP is becoming a reference hub for the validation of satellite sea surface salinity missions by providing valuable information on satellite products (SMOS, Aquarius, SMAP), an extensive in situ database (e.g., Argo, thermosalinographs, moorings, drifters) and additional thematic datasets (precipitation, evaporation, currents, sea level anomalies, sea surface temperature, etc.). Co-localized databases between satellite products and in situ datasets are systematically generated together with validation analysis reports for 30 predefined regions. The data and reports are made fully accessible through the web interface of the platform. The datasets, validation metrics and tools (automatic, user-driven) of the platform are described in detail in this paper. Several dedicated scienctific case studies involving satellite SSS data are also systematically monitored by the platform, including major river plumes, mesoscale signatures in boundary currents, high latitudes, semi-enclosed seas, and the high-precipitation region of the eastern tropical Pacific. Since 2019, a partnership in the Salinity Pi-MEP project has been agreed between ESA and NASA to enlarge focus to encompass the entire set of satellite salinity sensors. The two agencies are now working together to widen the platform features on several technical aspects, such as triple-collocation software implementation, additional match-up collocation criteria and sustained exploitation of data from the SPURS campaigns.

2021 ◽  
Author(s):  
Roberto Sabia ◽  
Sebastien Guimbard ◽  
Nicolas Reul ◽  
Tony Lee ◽  
Julian Schanze ◽  
...  

<p>The Pilot Mission Exploitation Platform (Pi-MEP) for Salinity (www.salinity-pimep.org) has been released operationally in 2019 to the broad oceanographic community, in order to foster satellite sea surface salinity validation and exploitation activities.</p><p>Specifically, the Platform aims at enhancing salinityvalidation, by allowing systematic inter-comparison of various EO datasets with a broad suite of in-situ data, and also at enabling oceanographic process studies by capitalizing on salinity data in synergy with additional spaceborne estimates.</p><p> </p><p>Despite Pi-MEP was originally conceived as an ESA initiative to widen the uptake of the Soil Moisture and Ocean Salinity (SMOS) mission data over ocean, a project partnership with NASA was devised soon after the operational deployment, and an official collaboration endorsed within the ESA-NASA Joint Program Planning Group (JPPG).</p><p> </p><p>The Salinity Pi-MEP has therefore become a reference hub for SMOS, SMAP and Aquarius satellite salinity missions, which are assessed in synergy with additional thematic datasets (e.g., precipitation, evaporation, currents, sea level anomalies, ocean color, sea surface temperature). </p><p>Match-up databases of satellite/in situ (such as Argo, TSG, moorings, drifters) data and corresponding validation reports at different spatiotemporal scales are systematically generated; furthermore, recently-developed dedicated tools allow data visualization, metrics computation and user-driven features extractions.</p><p> </p><p>The Platform is also meant to monitor salinity in selected oceanographic “case studies”, ranging from river plumes monitoring to SSS characterization in challenging regions, such as high latitudes or semi-enclosed basins.</p><p> </p><p>The two Agencies are currently collaborating to widen the Platform features on several technical aspects - ranging from a triple-collocation software implementation to a sustained exploitation of data from the SPURS-1/2 campaigns. In this context, an upgrade of the satellite/in-situ match-up methodology has been recently agreed, resulting into a redefinition of the validation criteria that will be subsequently implemented in the Platform.</p><p> </p><p>A further synthesis of the three satellites salinity algorithms, models and auxiliary data handling is at the core of the ESA Climate Change Initiative (CCI) on Salinity and of ESA-NASA further collaboration.</p>


2021 ◽  
pp. 1-49
Author(s):  
Claude Frankignoul ◽  
Elodie Kestenare ◽  
Gilles Reverdin

AbstractMonthly sea surface salinity (SSS) fields are constructed from observations, using objective mapping on a 1°x1° grid in the Atlantic between 30°S and 50°N in the 1970-2016 period in an update of the data set of Reverdin et al. (2007). Data coverage is heterogeneous, with increased density in 2002 when Argo floats become available, high density along Voluntary Observing Ship lines, and low density south of 10°S. Using lag correlation, the seasonal reemergence of SSS anomalies is investigated between 20°N and 50°N in 5°x5° boxes during the 1993-2016 period, both locally and remotely following the displacements of the deep mixed-layer waters estimated from virtual float trajectories derived from the daily AVISO surface geostrophic currents. Although SSS data are noisy, local SSS reemergence is detected in about half of the boxes, notably in the northeast and southeast, while little reemergence is seen in the central and part of the eastern subtropical gyre. In the same period, sea surface temperature (SST) reemergence is found only slightly more frequently, reflecting the short data duration. However, taking geostrophic advection into account degrades the detection of remote SSS and even SST reemergence. When anomalies are averaged over broader areas, robust evidence of a second and third SSS reemergence peak is found in the northeastern and southeastern parts of the domain, indicating long cold-season persistence of large-scale SSS anomalies, while only a first SST reemergence is seen. An oceanic reanalysis is used to confirm that the correlation analysis indeed reflects the reemergence of subsurface salinity anomalies.


2021 ◽  
Author(s):  
Kandasamy Priyanka ◽  
Ranjit Kumar Sarangi ◽  
Ramalingam Shanthi ◽  
Durairaj Poornima ◽  
Ayyappan Saravanakumar

Abstract A spatial and temporal variation of sea surface salinity (SSS) is vital to understand the dynamics of the seasonal and inter-annual changes in the marine environment. In the present study, Soil Moisture Active-Passive (SMAP) derived daily SSS product and Moderate Resolution Imaging Spectroradiometer (MODIS-Aqua) remote sensing reflectance (Rrs) based SSS images (Algorithm by Qing et al, 2013), applied in the coastal and offshore region of the Bay of Bengal (BoB). SMAP data validation with in situ data (offshore and coastal water, 10 and 15 points) showed good correlation at offshore water and less correlation at coastal water (R2 = 0.707/0.499, SEE = ± 0.291/±0.546, MNB = -0.0029/-0.0089 and RMSE = ± 0.092/±0.139) respectively. Similarly, MODIS-Aqua Rrs derived salinity data validated with in-situ SSS and observed the correlation as follows with R2 = 0.908/0.891, SEE = ± 2.395/±1.512, MNB = 0.0718/0.0361, RMSE = ± 0.760/±0.316 in offshore and coastal water respectively during April and August 2019. The salinity data observed in the range of 32 to 34.5psu. High SSS mean (35.6-35.8psu) observed during the spring inter-monsoon and low salinity (34.6-34.9psu) observed during winter monsoon phase as depicted from decadal scale interpretation. The present study inferred that MODIS aqua derived SSS is better than SMAP based SSS at coastal and offshore region of the western BoB, irrespective of their resolution and spectral differences. More data points based validation would provide the scope for further improvements and seasonal studies on salinity variability using ocean color sensors reflectance based datasets.


2021 ◽  
Vol 13 (4) ◽  
pp. 811
Author(s):  
Hao Liu ◽  
Zexun Wei

The variability in sea surface salinity (SSS) on different time scales plays an important role in associated oceanic or climate processes. In this study, we compare the SSS on sub-annual, annual, and interannual time scales among ten datasets, including in situ-based and satellite-based SSS products over 2011–2018. Furthermore, the dominant mode on different time scales is compared using the empirical orthogonal function (EOF). Our results show that the largest spread of ten products occurs on the sub-annual time scale. High correlation coefficients (0.6~0.95) are found in the global mean annual and interannual SSSs between individual products and the ensemble mean. Furthermore, this study shows good agreement among the ten datasets in representing the dominant mode of SSS on the annual and interannual time scales. This analysis provides information on the consistency and discrepancy of datasets to guide future use, such as improvements to ocean data assimilation and the quality of satellite-based data.


2014 ◽  
Vol 119 (9) ◽  
pp. 6171-6189 ◽  
Author(s):  
Wenqing Tang ◽  
Simon H. Yueh ◽  
Alexander G. Fore ◽  
Akiko Hayashi

2019 ◽  
Vol 11 (15) ◽  
pp. 1818 ◽  
Author(s):  
Daniele Ciani ◽  
Rosalia Santoleri ◽  
Gian Luigi Liberti ◽  
Catherine Prigent ◽  
Craig Donlon ◽  
...  

We present a study on the potential of the Copernicus Imaging Microwave Radiometer (CIMR) mission for the global monitoring of Sea-Surface Salinity (SSS) using Level-4 (gap-free) analysis processing. Space-based SSS are currently provided by the Soil Moisture and Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP) satellites. However, there are no planned missions to guarantee continuity in the remote SSS measurements for the near future. The CIMR mission is in a preparatory phase with an expected launch in 2026. CIMR is focused on the provision of global coverage, high resolution sea-surface temperature (SST), SSS and sea-ice concentration observations. In this paper, we evaluate the mission impact within the Copernicus Marine Environment Monitoring Service (CMEMS) SSS processing chain. The CMEMS SSS operational products are based on a combination of in situ and satellite (SMOS) SSS and high-resolution SST information through a multivariate optimal interpolation. We demonstrate the potential of CIMR within the CMEMS SSS operational production after the SMOS era. For this purpose, we implemented an Observing System Simulation Experiment (OSSE) based on the CMEMS MERCATOR global operational model. The MERCATOR SSSs were used to generate synthetic in situ and CIMR SSS and, at the same time, they provided a reference gap-free SSS field. Using the optimal interpolation algorithm, we demonstrated that the combined use of in situ and CIMR observations improves the global SSS retrieval compared to a processing where only in situ observations are ingested. The improvements are observed in the 60% and 70% of the global ocean surface for the reconstruction of the SSS and of the SSS spatial gradients, respectively. Moreover, the study highlights the CIMR-based salinity patterns are more accurate both in the open ocean and in coastal areas. We conclude that CIMR can guarantee continuity for accurate monitoring of the ocean surface salinity from space.


2013 ◽  
Vol 30 (11) ◽  
pp. 2689-2694 ◽  
Author(s):  
Nadya T. Vinogradova ◽  
Rui M. Ponte

Abstract Calibration and validation efforts of the Aquarius and Soil Moisture and Ocean Salinity (SMOS) satellite missions involve comparisons of satellite and in situ measurements of sea surface salinity (SSS). Such estimates of SSS can differ by the presence of small-scale variability, which can affect the in situ point measurement, but be averaged out in the satellite retrievals because of their large footprint. This study quantifies how much of a difference is expected between in situ and satellite SSS measurements on the basis of their different sampling of spatial variability. Maps of sampling error resulting from small-scale noise, defined here as the root-mean-square difference between “local” and footprint-averaged SSS estimates, are derived using a solution from a global high-resolution ocean data assimilation system. The errors are mostly <0.1 psu (global median is 0.05 psu), but they can be >0.2 psu in several regions, particularly near strong currents and outflows of major rivers. To examine small-scale noise in the context of other errors, its values are compared with the overall expected differences between monthly Aquarius SSS and Argo-based estimates. Results indicate that in several ocean regions, small-scale variability can be an important source of sampling error for the in situ measurements.


2020 ◽  
Author(s):  
Sisi Qin

<p>In this study, Sea Surface Salinity (SSS) Level 3 (L3) daily product derived from Soil Moisture Active Passive (SMAP) during the year 2016, was validated and compared with SSS daily products derived from Soil Moisture and Ocean Salinity (SMOS) and in-situ measurements. Generally, the Root Mean Square Error (RMSE) of the daily SSS products is larger along the coastal areas and at high latitudes and is smaller in the tropical regions and open oceans. Comparisons between the two types of daily satellite SSS product revealed that the RMSE was higher in the daily SMOS product than in the SMAP, whereas the bias of the daily SMOS was observed to be less than that of the SMAP when compared with Argo floats data. In addition, the latitude-dependent bias and RMSE of the SMAP SSS were found to be primarily influenced by the precipitation and the Sea Surface Temperature (SST).Then, aregression analysis method which has adopted the precipitation and SST data was used to correct the larger bias of the daily SMAP product. It was confirmed that the corrected daily SMAP product could be used for assimilation in high-resolution forecast models, due to the fact that it was demonstrated to be unbiased and much closer to the in-situ measurements than the original uncorrected SMAP product.</p>


Sign in / Sign up

Export Citation Format

Share Document