scholarly journals Multipath Map Method for TDOA Based Indoor Reverse Positioning System with Improved Chan-Taylor Algorithm

Sensors ◽  
2020 ◽  
Vol 20 (11) ◽  
pp. 3223 ◽  
Author(s):  
Cheng Hua ◽  
Kun Zhao ◽  
Danan Dong ◽  
Zhengqi Zheng ◽  
Chao Yu ◽  
...  
Keyword(s):  
Iterative Algorithm ◽  
Line Of Sight ◽  
Positioning System ◽  
Domain Modeling ◽  
Time Difference Of Arrival ◽  
Arrival Times ◽  
Positioning Systems ◽  
Negative Effect ◽  
Height Component ◽  
Non Line Of Sight

We study wireless indoor positioning systems where multiple synchronized infrastructure devices simultaneously receive signals from an object of interest whose arrival times are measured. The positioning performance is degraded by unresolvable channel multipath and non-line-of-sight (NLOS) reflctions which cause a bias in the time difference of arrival (TDOA) measurements. In order to reduce the negative effect of multi-path, a Multi-Path Map (MPM) method based on spatial domain modeling principle in the reverse positioning framework with good robustness is proposed. Meanwhile, an improved non-linear iterative algorithm with height component constrained which reduces the complexity is introduced to calculate the coordinates so that the performance of the MPM can be verified. By using the MPM measurements as pre-calibration information to compensate the TDOA observed value, the accuracy of the cooperative location based on a UWB device is 6.45 cm, which achieves 63% improvement than that of none MPM used.

Ultra Wideband Indoor Positioning Using Kalman Filters

2012 ◽  
Vol 433-440 ◽  
pp. 4207-4213 ◽  
Author(s):  
Li Zhang ◽  
Hao Zhang ◽  
Xue Rong Cui ◽  
T Aaron Gulliver
Keyword(s):  
Kalman Filter ◽  
Ultra Wideband ◽  
Line Of Sight ◽  
Time Difference Of Arrival ◽  
Positioning Systems ◽  
Positioning Technique ◽  
Performance Results ◽  
Source Of Error ◽  
Mitigation Technique ◽  
Non Line Of Sight

A time-difference-of-arrival (TDOA) positioning technique for indoor ultra wideband (UWB) systems is presented. Non-line-of-sight (NLOS) propagation error is a major source of error in positioning systems. Therefore an NLOS mitigation technique employing a Kalman filter is utilized to reduce the NLOS errors in indoor UWB environments. An extended Kalman filter (EKF) is used to process the TDOA data for mobile positioning and tracking. Performance results are presented which show that the proposed scheme can significantly improve the positioning accuracy in a UWB environment.

scholarly journals An Indoor AC Magnetic Positioning System

2021 ◽  
Author(s):  
Paolo Carbone ◽  
Guido De Angelis ◽  
Valter Pasku ◽  
Alessio De Angelis ◽  
Marco Dionigi ◽  
...  
Keyword(s):  
Indoor Environment ◽  
Indoor Positioning ◽  
Experimental Results ◽  
System Level ◽  
Line Of Sight ◽  
Positioning System ◽  
Positioning Error ◽  
Geometric Configurations ◽  
Indoor Positioning System ◽  
Non Line Of Sight

<div><div><div><p>This paper describes the design and realization of a Magnetic Indoor Positioning System. The system is entirely realized using off-the-shelf components and is based on inductive coupling between resonating coils. Both system-level architecture and realization details are described along with experimental results. The realized system exhibits a maximum positioning error of less than 10 cm in an indoor environment over a 3×3 m2 area. Extensive experiments in larger areas, in non-line-of-sight conditions, and in unfavorable geometric configurations, show sub-meter accuracy, thus validating the robustness of the system with respect to other existing solutions.</p></div></div></div>

scholarly journals Precise Positioning of Autonomous Vehicles Combining UWB Ranging Estimations with On-Board Sensors

Electronics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1238
Author(s):  
Javier San Martín ◽  
Ainhoa Cortés ◽  
Leticia Zamora-Cadenas ◽  
Bo Joel Svensson
Keyword(s):  
Autonomous Vehicles ◽  
Research Work ◽  
Ultra Wideband ◽  
Line Of Sight ◽  
Use Case ◽  
Positioning System ◽  
Precise Positioning ◽  
Research Institutes ◽  
Simulated Environment ◽  
Non Line Of Sight

In this paper, we analyze the performance of a positioning system based on the fusion of Ultra-Wideband (UWB) ranging estimates together with odometry and inertial data from the vehicle. For carrying out this data fusion, an Extended Kalman Filter (EKF) has been used. Furthermore, a post-processing algorithm has been designed to remove the Non Line-Of-Sight (NLOS) UWB ranging estimates to further improve the accuracy of the proposed solution. This solution has been tested using both a simulated environment and a real environment. This research work is in the scope of the PRoPART European Project. The different real tests have been performed on the AstaZero proving ground using a Radio Control car (RC car) developed by RISE (Research Institutes of Sweden) as testing platform. Thus, a real time positioning solution has been achieved complying with the accuracy requirements for the PRoPART use case.

scholarly journals A time difference of arrival/angle of arrival fusion algorithm with steepest descent algorithm for indoor non-line-of-sight locationing

2019 ◽  
Vol 15 (9) ◽  
pp. 155014771986035 ◽  
Author(s):  
Chong Shen ◽  
Chengxiao Wang ◽  
Kun Zhang ◽  
Xianpeng Wang ◽  
Jing Liu
Keyword(s):  
Steepest Descent ◽  
Time Difference ◽  
Line Of Sight ◽  
Angle Of Arrival ◽  
Fusion Algorithm ◽  
Time Difference Of Arrival ◽  
Positioning Accuracy ◽  
Descent Algorithm ◽  
Steepest Descent Algorithm ◽  
Non Line Of Sight

In complex indoor propagation environment, the non-line-of-sight error caused by various obstacles brings great error to node positioning. Choosing the appropriate signal transmission methods is important to improve node indoor positioning accuracy. In this research, ultra-wideband technology, as baseband with high theoretical positioning accuracy and real-time performance, is implemented to transmit indoor signals. The proposed fusion algorithm with ultra-wideband baseband takes advantages from both time difference of arrival and angle of arrival algorithms, combined through the steepest descent algorithm. The non-line-of-sight signal estimation error is iteratively eliminated to achieve effective positioning accuracy. The experimental results indicate that the novel time difference of arrival/angle of arrival fusion algorithm with steepest descent algorithm can largely improve node positioning accuracy and stability.

scholarly journals Estimating Directional Data From Network Topology for Improving Tracking Performance

2019 ◽  
Vol 8 (2) ◽  
pp. 30 ◽  
Author(s):  
Slavisa Tomic ◽  
Marko Beko ◽  
Rui Dinis ◽  
Paulo Montezuma
Keyword(s):  
Prior Knowledge ◽  
Polar Space ◽  
Reference Points ◽  
Line Of Sight ◽  
Time Of Arrival ◽  
Angle Of Arrival ◽  
Measurement Models ◽  
Novel Approach ◽  
Negative Effect ◽  
Non Line Of Sight

This work proposes a novel approach for tracking a moving target in non-line-of-sight (NLOS) environments based on range estimates extracted from received signal strength (RSS) and time of arrival (TOA) measurements. By exploiting the known architecture of reference points to act as an improper antenna array and the range estimates, angle of arrival (AOA) of the signal emitted by the target is first estimated at each reference point. We then show how to take advantage of these angle estimates to convert the problem into a more convenient, polar space, where a linearization of the measurement models is easily achieved. The derived linear model serves as the main building block on top of which prior knowledge acquired during the movement of the target is incorporated by adapting a Kalman filter (KF). The performance of the proposed approach was assessed through computer simulations, which confirmed its effectiveness in combating the negative effect of NLOS bias and superiority in comparison with its naive counterpart, which does not take prior knowledge into consideration.

scholarly journals Indoor Positioning System Based on Global Positioning System Signals with Down- and Up-Converters in 433 MHz ISM Band

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4338
Author(s):  
Abdulkadir Uzun ◽  
Firas Abdul Ghani ◽  
Amir Mohsen Ahmadi Najafabadi ◽  
Hüsnü Yenigün ◽  
İbrahim Tekin
Keyword(s):  
Global Positioning System ◽  
Indoor Positioning ◽  
Position Estimation ◽  
Line Of Sight ◽  
Positioning System ◽  
Gps Receiver ◽  
Ism Band ◽  
Global Positioning ◽  
Indoor Positioning System ◽  
Non Line Of Sight

In this paper, an indoor positioning system using Global Positioning System (GPS) signals in the 433 MHz Industrial Scientific Medical (ISM) band is proposed, and an experimental demonstration of how the proposed system operates under both line-of-sight and non-line-of-sight conditions on a building floor is presented. The proposed method is based on down-converting (DC) repeaters and an up-converting (UC) receiver. The down-conversion is deployed to avoid the restrictions on the use of Global Navigation Satellite Systems (GNSS) repeaters, to achieve higher output power, and to expose the GPS signals to lower path loss. The repeaters receive outdoor GPS signals at 1575.42 MHz (L1 band), down-convert them to the 433 MHz ISM band, then amplify and retransmit them to the indoor environment. The front end up-converter is combined with an off-the-shelf GPS receiver. When GPS signals at 433 MHz are received by the up-converting receiver, it then amplifies and up-converts these signals back to the L1 frequency. Subsequently, the off-the-shelf GPS receiver calculates the pseudo-ranges. The raw data are then sent from the receiver over a 2.4 GHz Wi-Fi link to a remote computer for data processing and indoor position estimation. Each repeater also has an attenuator to adjust its amplification level so that each repeater transmits almost equal signal levels in order to prevent jamming of the off-the-shelf GPS receiver. Experimental results demonstrate that the indoor position of a receiver can be found with sub-meter accuracy under both line-of-sight and non-line-of-sight conditions. The estimated position was found to be 54 and 98 cm away from the real position, while the 50% circular error probable (CEP) of the collected samples showed a radius of 3.3 and 4 m, respectively, for line-of-sight and non-line-of-sight cases.

Sign in / Sign up

Export Citation Format

Share Document