scholarly journals Hierarchical Optimization of 3D Point Cloud Registration

Sensors ◽  
2020 ◽  
Vol 20 (23) ◽  
pp. 6999
Author(s):  
Huikai Liu ◽  
Yue Zhang ◽  
Linjian Lei ◽  
Hui Xie ◽  
Yan Li ◽  
...  
Keyword(s):  
Point Cloud ◽  
Point Clouds ◽  
Hierarchical Optimization ◽  
Minimum Problem ◽  
Optimization Approach ◽  
3D Point Cloud ◽  
Point Cloud Registration ◽  
Multi Scale ◽  
3D Point Clouds ◽  
Coarse Registration

Rigid registration of 3D point clouds is the key technology in robotics and computer vision. Most commonly, the iterative closest point (ICP) and its variants are employed for this task. These methods assume that the closest point is the corresponding point and lead to sensitivity to the outlier and initial pose, while they have poor computational efficiency due to the closest point computation. Most implementations of the ICP algorithm attempt to deal with this issue by modifying correspondence or adding coarse registration. However, this leads to sacrificing the accuracy rate or adding the algorithm complexity. This paper proposes a hierarchical optimization approach that includes improved voxel filter and Multi-Scale Voxelized Generalized-ICP (MVGICP) for 3D point cloud registration. By combining traditional voxel sampling with point density, the outlier filtering and downsample are successfully realized. Through multi-scale iteration and avoiding closest point computation, MVGICP solves the local minimum problem and optimizes the operation efficiency. The experimental results demonstrate that the proposed algorithm is superior to the current algorithms in terms of outlier filtering and registration performance.

scholarly journals Fast and Robust Flight Altitude Estimation of Multirotor UAVs in Dynamic Unstructured Environments Using 3D Point Cloud Sensors

Aerospace ◽  
2018 ◽  
Vol 5 (3) ◽  
pp. 94 ◽  
Author(s):  
Hriday Bavle ◽  
Jose Sanchez-Lopez ◽  
Paloma Puente ◽  
Alejandro Rodriguez-Ramos ◽  
Carlos Sampedro ◽  
...  
Keyword(s):  
Point Cloud ◽  
Point Clouds ◽  
Estimation Algorithm ◽  
Indoor Environments ◽  
3D Point Cloud ◽  
Flight Altitude ◽  
Cloud Data ◽  
3D Point Clouds ◽  
Laser Altimeters ◽  
Altitude Estimation

This paper presents a fast and robust approach for estimating the flight altitude of multirotor Unmanned Aerial Vehicles (UAVs) using 3D point cloud sensors in cluttered, unstructured, and dynamic indoor environments. The objective is to present a flight altitude estimation algorithm, replacing the conventional sensors such as laser altimeters, barometers, or accelerometers, which have several limitations when used individually. Our proposed algorithm includes two stages: in the first stage, a fast clustering of the measured 3D point cloud data is performed, along with the segmentation of the clustered data into horizontal planes. In the second stage, these segmented horizontal planes are mapped based on the vertical distance with respect to the point cloud sensor frame of reference, in order to provide a robust flight altitude estimation even in presence of several static as well as dynamic ground obstacles. We validate our approach using the IROS 2011 Kinect dataset available in the literature, estimating the altitude of the RGB-D camera using the provided 3D point clouds. We further validate our approach using a point cloud sensor on board a UAV, by means of several autonomous real flights, closing its altitude control loop using the flight altitude estimated by our proposed method, in presence of several different static as well as dynamic ground obstacles. In addition, the implementation of our approach has been integrated in our open-source software framework for aerial robotics called Aerostack.

scholarly journals Multi-view attention-convolution pooling network for 3D point cloud classification

2021 ◽  
Author(s):  
Wenju Wang ◽  
Tao Wang ◽  
Yu Cai
Keyword(s):  
Point Cloud ◽  
Point Clouds ◽  
Information Loss ◽  
Feature Representation ◽  
3D Point Cloud ◽  
Current Output ◽  
3D Point Clouds ◽  
Cloud Classification ◽  
Feature Information ◽  
Point Cloud Classification

AbstractClassifying 3D point clouds is an important and challenging task in computer vision. Currently, classification methods using multiple views lose characteristic or detail information during the representation or processing of views. For this reason, we propose a multi-view attention-convolution pooling network framework for 3D point cloud classification tasks. This framework uses Res2Net to extract the features from multiple 2D views. Our attention-convolution pooling method finds more useful information in the input data related to the current output, effectively solving the problem of feature information loss caused by feature representation and the detail information loss during dimensionality reduction. Finally, we obtain the probability distribution of the model to be classified using a full connection layer and the softmax function. The experimental results show that our framework achieves higher classification accuracy and better performance than other contemporary methods using the ModelNet40 dataset.

scholarly journals IMAGE TO POINT CLOUD TRANSLATION USING CONDITIONAL GENERATIVE ADVERSARIAL NETWORK FOR AIRBORNE LIDAR DATA

2021 ◽  
Vol V-2-2021 ◽  
pp. 169-174
Author(s):  
T. Shinohara ◽  
H. Xiu ◽  
M. Matsuoka
Keyword(s):  
Point Cloud ◽  
Large Scale ◽  
Point Clouds ◽  
Airborne Lidar ◽  
Real Point ◽  
3D Point Cloud ◽  
Generative Adversarial Network ◽  
Adversarial Network ◽  
3D Point Clouds ◽  
Latent Features

Abstract. This study introduces a novel image to a 3D point-cloud translation method with a conditional generative adversarial network that creates a large-scale 3D point cloud. This can generate supervised point clouds observed via airborne LiDAR from aerial images. The network is composed of an encoder to produce latent features of input images, generator to translate latent features to fake point clouds, and discriminator to classify false or real point clouds. The encoder is a pre-trained ResNet; to overcome the difficulty of generating 3D point clouds in an outdoor scene, we use a FoldingNet with features from ResNet. After a fixed number of iterations, our generator can produce fake point clouds that correspond to the input image. Experimental results show that our network can learn and generate certain point clouds using the data from the 2018 IEEE GRSS Data Fusion Contest.

An Improved Method for Restoring the Shape of 3D Point Cloud Surfaces

2018 ◽  
Vol 9 (2) ◽  
pp. 37-53
Author(s):  
Sinh Van Nguyen ◽  
Ha Manh Tran ◽  
Minh Khai Tran
Keyword(s):  
Geometric Modeling ◽  
Point Cloud ◽  
Point Clouds ◽  
Tangent Plane ◽  
Surface Patch ◽  
3D Point Cloud ◽  
Improved Method ◽  
Initial Shape ◽  
Cloud Data ◽  
3D Point Clouds

Building 3D objects or reconstructing their surfaces from 3D point cloud data are researched activities in the field of geometric modeling and computer graphics. In the recent years, they are also studied and used in some fields such as: graph models and simulation; image processing or restoration of digital heritages. This article presents an improved method for restoring the shape of 3D point cloud surfaces. The method is a combination of creating a Bezier surface patch and computing tangent plane of 3D points to fill holes on a surface of 3D point clouds. This method is described as follows: at first, a boundary for each hole on the surface is identified. The holes are then filled by computing Bezier curves of surface patches to find missing points. After that, the holes are refined based on two steps (rough and elaborate) to adjust the inserted points and preserve the local curvature of the holes. The contribution of the proposed method has been shown in processing time and the novelty of combined computation in this method has preserved the initial shape of the surface

scholarly journals Point Siamese Network for Person Tracking Using 3D Point Clouds

Sensors ◽  
2019 ◽  
Vol 20 (1) ◽  
pp. 143
Author(s):  
Yubo Cui ◽  
Zheng Fang ◽  
Sifan Zhou
Keyword(s):  
Feature Extraction ◽  
Point Cloud ◽  
Unscented Kalman Filter ◽  
Point Clouds ◽  
Target Person ◽  
Bayesian Filtering ◽  
3D Point Cloud ◽  
Person Tracking ◽  
Siamese Network ◽  
3D Point Clouds

Person tracking is an important issue in both computer vision and robotics. However, most existing person tracking methods using 3D point cloud are based on the Bayesian Filtering framework which are not robust in challenging scenes. In contrast with the filtering methods, in this paper, we propose a neural network to cope with person tracking using only 3D point cloud, named Point Siamese Network (PSN). PSN consists of two input branches named template and search, respectively. After finding the target person (by reading the label or using a detector), we get the inputs of the two branches and create feature spaces for them using feature extraction network. Meanwhile, a similarity map based on the feature space is proposed between them. We can obtain the target person from the map. Furthermore, we add an attention module to the template branch to guide feature extraction. To evaluate the performance of the proposed method, we compare it with the Unscented Kalman Filter (UKF) on 3 custom labeled challenging scenes and the KITTI dataset. The experimental results show that the proposed method performs better than UKF in robustness and accuracy and has a real-time speed. In addition, we publicly release our collected dataset and the labeled sequences to the research community.

6-DOF Localization for a Mobile Robot Using Outdoor 3D Point Clouds

2010 ◽  
Vol 22 (2) ◽  
pp. 158-166 ◽  
Author(s):  
Taro Suzuki ◽  
◽  
Yoshiharu Amano ◽  
Takumi Hashizume
Keyword(s):  
Mobile Robot ◽  
Point Cloud ◽  
Field Experiments ◽  
Point Clouds ◽  
Measurement Model ◽  
3D Point Cloud ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Continuous Contact ◽  
3D Point Clouds

This paper describes outdoor localization for a mobile robot using a laser scanner and three-dimensional (3D) point cloud data. A Mobile Mapping System (MMS) measures outdoor 3D point clouds easily and precisely. The full six-dimensional state of a mobile robot is estimated combining dead reckoning and 3D point cloud data. Two-dimensional (2D) position and orientation are extended to 3D using 3D point clouds assuming that the mobile robot remains in continuous contact with the road surface. Our approach applies a particle filter to correct position error in the laser measurement model in 3D point cloud space. Field experiments were conducted to evaluate the accuracy of our proposal. As the result of the experiment, it was confirmed that a localization precision of 0.2 m (RMS) is possible using our proposal.

scholarly journals Towards Efficient Implementation of an Octree for a Large 3D Point Cloud

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4398 ◽  
Author(s):  
Soohee Han
Keyword(s):  
Point Cloud ◽  
Laser Scanner ◽  
Point Clouds ◽  
Main Memory ◽  
3D Point Cloud ◽  
Airborne Laser Scanner ◽  
Memory Efficiency ◽  
3D Point Clouds ◽  
Short Tunnel ◽  
Better Than

The present study introduces an efficient algorithm to construct a file-based octree for a large 3D point cloud. However, the algorithm was very slow compared with a memory-based approach, and got even worse when using a 3D point cloud scanned in longish objects like tunnels and corridors. The defects were addressed by implementing a semi-isometric octree group. The approach implements several semi-isometric octrees in a group, which tightly covers the 3D point cloud, though each octree along with its leaf node still maintains an isometric shape. The proposed approach was tested using three 3D point clouds captured in a long tunnel and a short tunnel by a terrestrial laser scanner, and in an urban area by an airborne laser scanner. The experimental results showed that the performance of the semi-isometric approach was not worse than a memory-based approach, and quite a lot better than a file-based one. Thus, it was proven that the proposed semi-isometric approach achieves a good balance between query performance and memory efficiency. In conclusion, if given enough main memory and using a moderately sized 3D point cloud, a memory-based approach is preferable. When the 3D point cloud is larger than the main memory, a file-based approach seems to be the inevitable choice, however, the semi-isometric approach is the better option.

scholarly journals Automatic Grapevine Trunk Detection on UAV-Based Point Cloud

2020 ◽  
Vol 12 (18) ◽  
pp. 3043 ◽  
Author(s):  
Juan M. Jurado ◽  
Luís Pádua ◽  
Francisco R. Feito ◽  
Joaquim J. Sousa
Keyword(s):  
Point Cloud ◽  
High Performance ◽  
Point Clouds ◽  
Geometrical Parameters ◽  
3D Point Cloud ◽  
Cloud Data ◽  
3D Point Clouds ◽  
Geometrical Features ◽  
Vegetative Cycle ◽  
Automated Methods

The optimisation of vineyards management requires efficient and automated methods able to identify individual plants. In the last few years, Unmanned Aerial Vehicles (UAVs) have become one of the main sources of remote sensing information for Precision Viticulture (PV) applications. In fact, high resolution UAV-based imagery offers a unique capability for modelling plant’s structure making possible the recognition of significant geometrical features in photogrammetric point clouds. Despite the proliferation of innovative technologies in viticulture, the identification of individual grapevines relies on image-based segmentation techniques. In that way, grapevine and non-grapevine features are separated and individual plants are estimated usually considering a fixed distance between them. In this study, an automatic method for grapevine trunk detection, using 3D point cloud data, is presented. The proposed method focuses on the recognition of key geometrical parameters to ensure the existence of every plant in the 3D model. The method was tested in different commercial vineyards and to push it to its limit a vineyard characterised by several missing plants along the vine rows, irregular distances between plants and occluded trunks by dense vegetation in some areas, was also used. The proposed method represents a disruption in relation to the state of the art, and is able to identify individual trunks, posts and missing plants based on the interpretation and analysis of a 3D point cloud. Moreover, a validation process was carried out allowing concluding that the method has a high performance, especially when it is applied to 3D point clouds generated in phases in which the leaves are not yet very dense (January to May). However, if correct flight parametrizations are set, the method remains effective throughout the entire vegetative cycle.

Sign in / Sign up

Export Citation Format

Share Document