Research on a Novel Locating Method for Track Inspection Based on Onboard Sensors in Maglev Train

Guideway inspection is of great significance to the operation safety and riding quality of a commercial high-speed maglev transportation system. When analyzing guideway inspection data, it is important to obtain the location information for each piece of raw data and convert it from the time domain to the spatial domain for the analysis afterward. Previous studies have used the method of adding additional hardware such as GPS (global positioning system) receivers, LRF (location reference flag) readers, or onboard CAN (controller area network) bus adaptors to obtain location information. This paper presents a novel method for indirectly obtaining the location information via the use of data from the levitation and guidance control sensors perpendicular to the longitudinal direction to extract the characteristic information from the track. The method can be used for a long stator linear motor-driven maglev system and similar contactless rail transit systems. The results showed that the method could accurately identify the required location information in each stator tooth during the entire operation simultaneously with the operating information such as train velocity, direction, and track ID, without additional hardware installation and vehicle network connection. Thus, it could improve the pertinence of the results of guideway inspection equipment, and at the same time, facilitate the miniaturization and independence of guideway inspection equipment.

Download Full-text

Perancangan Sistem Backup Data Menggunakan File Transfer Protocol Pada Jaringan Local Area Network Di SMP Negeri 6 Pekanbaru

10.31227/osf.io/anmyq ◽

2020 ◽

Author(s):

Sasqia Ismi Aulia ◽

[email protected]

Keyword(s):

Data Storage ◽

Local Area Network ◽

Local Area ◽

Area Network ◽

File Transfer ◽

Network Connection ◽

Teachers And Students ◽

Network Operating Systems ◽

Selection Of ◽

Server Computer

This study aims to design a LAN network for data backup systems that are in accordance with certain aspects such as the selection of network design, network hardware, network transmission media, network connection devices, and network operating systems. Data is the most important thing for everyone, data can usually be reused even though it has not been used for some time, and therefore data storage is a serious problem that must be considered. Data on the server computer is very important to be maintained so that a backup process is needed on that data to another computer that is used as a backup in the event of damage to the hardware and software of the server computer. FTP is one of the solutions to the problems faced above,where FTP can be used to process the download and upload between the server and client computers. This design uses the Autobot system. The expected benefit in designing this LAN is that the existing network at SMP Negeri 6 Pekanbaru is not only used by employees and employees but can be used and enjoyed by teachers and students to access the internet anywhere as long as it is still within the scope of the SMP Negeri 6 area Pekanbaru.

Download Full-text