scholarly journals Autonomous Incident Detection on Spectrometers Using Deep Convolutional Models

Sensors ◽  
2021 ◽  
Vol 22 (1) ◽  
pp. 160
Author(s):  
Xuelin Zhang ◽  
Donghao Zhang ◽  
Alexander Leye ◽  
Adrian Scott ◽  
Luke Visser ◽  
...  
Keyword(s):  
Deep Learning ◽  
Object Detection ◽  
Real Time ◽  
Data Augmentation ◽  
Expert Knowledge ◽  
Poor Quality ◽  
Sample Introduction ◽  
Spray Chamber ◽  
Chemistry Industry ◽  
Real Time System

This paper focuses on improving the performance of scientific instrumentation that uses glass spray chambers for sample introduction, such as spectrometers, which are widely used in analytical chemistry, by detecting incidents using deep convolutional models. The performance of these instruments can be affected by the quality of the introduction of the sample into the spray chamber. Among the indicators of poor quality sample introduction are two primary incidents: The formation of liquid beads on the surface of the spray chamber, and flooding at the bottom of the spray chamber. Detecting such events autonomously as they occur can assist with improving the overall operational accuracy and efficacy of the chemical analysis, and avoid severe incidents such as malfunction and instrument damage. In contrast to objects commonly seen in the real world, beading and flooding detection are more challenging since they are of significantly small size and transparent. Furthermore, the non-rigid property increases the difficulty of the detection of these incidents, as such that existing deep-learning-based object detection frameworks are prone to fail for this task. There is no former work that uses computer vision to detect these incidents in the chemistry industry. In this work, we propose two frameworks for the detection task of these two incidents, which not only leverage the modern deep learning architectures but also integrate with expert knowledge of the problems. Specifically, the proposed networks first localize the regions of interest where the incidents are most likely generated and then refine these incident outputs. The use of data augmentation and synthesis, and choice of negative sampling in training, allows for a large increase in accuracy while remaining a real-time system for inference. In the data collected from our laboratory, our method surpasses widely used object detection baselines and can correctly detect 95% of the beads and 98% of the flooding. At the same time, out method can process four frames per second and is able to be implemented in real time.

scholarly journals Application of Deep Learning in Integrated Pest Management: A Real-Time System for Detection and Diagnosis of Oilseed Rape Pests

2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
Yong He ◽  
Hong Zeng ◽  
Yangyang Fan ◽  
Shuaisheng Ji ◽  
Jianjian Wu
Keyword(s):  
Deep Learning ◽  
Integrated Pest Management ◽  
Pest Management ◽  
Real Time ◽  
Oilseed Rape ◽  
Data Augmentation ◽  
Low Cost ◽  
Response Speed ◽  
Original Model ◽  
Real Time System

In this paper, we proposed an approach to detect oilseed rape pests based on deep learning, which improves the mean average precision (mAP) to 77.14%; the result increased by 9.7% with the original model. We adopt this model to mobile platform to let every farmer able to use this program, which will diagnose pests in real time and provide suggestions on pest controlling. We designed an oilseed rape pest imaging database with 12 typical oilseed rape pests and compared the performance of five models, SSD w/Inception is chosen as the optimal model. Moreover, for the purpose of the high mAP, we have used data augmentation (DA) and added a dropout layer. The experiments are performed on the Android application we developed, and the result shows that our approach surpasses the original model obviously and is helpful for integrated pest management. This application has improved environmental adaptability, response speed, and accuracy by contrast with the past works and has the advantage of low cost and simple operation, which are suitable for the pest monitoring mission of drones and Internet of Things (IoT).

scholarly journals Real-Time and Deep Learning Based Vehicle Detection and Classification Using Pixel-Wise Code Exposure Measurements

Electronics ◽  
2020 ◽  
Vol 9 (6) ◽  
pp. 1014 ◽  
Author(s):  
Chiman Kwan ◽  
David Gribben ◽  
Bryan Chou ◽  
Bence Budavari ◽  
Jude Larkin ◽  
...  
Keyword(s):  
Deep Learning ◽  
Object Detection ◽  
Compressive Sensing ◽  
Real Time ◽  
Classification Performance ◽  
Video Data ◽  
Real Time System ◽  
Processing Power ◽  
Compressed Data ◽  
Processing Device

One key advantage of compressive sensing is that only a small amount of the raw video data is transmitted or saved. This is extremely important in bandwidth constrained applications. Moreover, in some scenarios, the local processing device may not have enough processing power to handle object detection and classification and hence the heavy duty processing tasks need to be done at a remote location. Conventional compressive sensing schemes require the compressed data to be reconstructed first before any subsequent processing can begin. This is not only time consuming but also may lose important information in the process. In this paper, we present a real-time framework for processing compressive measurements directly without any image reconstruction. A special type of compressive measurement known as pixel-wise coded exposure (PCE) is adopted in our framework. PCE condenses multiple frames into a single frame. Individual pixels can also have different exposure times to allow high dynamic ranges. A deep learning tool known as You Only Look Once (YOLO) has been used in our real-time system for object detection and classification. Extensive experiments showed that the proposed real-time framework is feasible and can achieve decent detection and classification performance.

scholarly journals Robust Approach to Supervised Deep Neural Network Training for Real-Time Object Classification in Cluttered Indoor Environment

2021 ◽  
Vol 11 (15) ◽  
pp. 7148
Author(s):  
Bedada Endale ◽  
Abera Tullu ◽  
Hayoung Shi ◽  
Beom-Soo Kang
Keyword(s):  
Neural Network ◽  
Deep Learning ◽  
Real Time ◽  
Network Architecture ◽  
Input Data ◽  
Deep Neural Network ◽  
Data Augmentation ◽  
Object Classification ◽  
Training Data ◽  
Gradient Descent Algorithm

Unmanned aerial vehicles (UAVs) are being widely utilized for various missions: in both civilian and military sectors. Many of these missions demand UAVs to acquire artificial intelligence about the environments they are navigating in. This perception can be realized by training a computing machine to classify objects in the environment. One of the well known machine training approaches is supervised deep learning, which enables a machine to classify objects. However, supervised deep learning comes with huge sacrifice in terms of time and computational resources. Collecting big input data, pre-training processes, such as labeling training data, and the need for a high performance computer for training are some of the challenges that supervised deep learning poses. To address these setbacks, this study proposes mission specific input data augmentation techniques and the design of light-weight deep neural network architecture that is capable of real-time object classification. Semi-direct visual odometry (SVO) data of augmented images are used to train the network for object classification. Ten classes of 10,000 different images in each class were used as input data where 80% were for training the network and the remaining 20% were used for network validation. For the optimization of the designed deep neural network, a sequential gradient descent algorithm was implemented. This algorithm has the advantage of handling redundancy in the data more efficiently than other algorithms.

scholarly journals Comparative Analysis on Deep Learning Approaches for Heavy-Vehicle Detection based on Data Augmentation and Transfer-Learning techniques

2021 ◽  
Vol 13 (3) ◽  
pp. 809-820
Author(s):  
V. Sowmya ◽  
R. Radha
Keyword(s):  
Neural Networks ◽  
Deep Learning ◽  
Real Time ◽  
Transfer Learning ◽  
Convolutional Neural Networks ◽  
Traffic Management ◽  
Data Augmentation ◽  
Vehicle Detection ◽  
Heavy Vehicles ◽  
Detection And Recognition

Vehicle detection and recognition require demanding advanced computational intelligence and resources in a real-time traffic surveillance system for effective traffic management of all possible contingencies. One of the focus areas of deep intelligent systems is to facilitate vehicle detection and recognition techniques for robust traffic management of heavy vehicles. The following are such sophisticated mechanisms: Support Vector Machine (SVM), Convolutional Neural Networks (CNN), Regional Convolutional Neural Networks (R-CNN), You Only Look Once (YOLO) model, etcetera. Accordingly, it is pivotal to choose the precise algorithm for vehicle detection and recognition, which also addresses the real-time environment. In this study, a comparison of deep learning algorithms, such as the Faster R-CNN, YOLOv2, YOLOv3, and YOLOv4, are focused on diverse aspects of the features. Two entities for transport heavy vehicles, the buses and trucks, constitute detection and recognition elements in this proposed work. The mechanics of data augmentation and transfer-learning is implemented in the model; to build, execute, train, and test for detection and recognition to avoid over-fitting and improve speed and accuracy. Extensive empirical evaluation is conducted on two standard datasets such as COCO and PASCAL VOC 2007. Finally, comparative results and analyses are presented based on real-time.

Experimental Deep Learning Object Detection in Real-time Colonoscopies

2021 ◽  
Author(s):  
Adrian Ciobanu ◽  
Mihaela Luca ◽  
Tudor Barbu ◽  
Vasile Drug ◽  
Andrei Olteanu ◽  
...  
Keyword(s):  
Deep Learning ◽  
Object Detection ◽  
Real Time ◽  
Learning Object

Prediction of Crime Scene Objects Using Deep Learning

2021 ◽  
Vol 9 (VIII) ◽  
pp. 857-864
Author(s):  
Vibhavari B Rao
Keyword(s):  
Deep Learning ◽  
Object Detection ◽  
Computer Architecture ◽  
Real Time ◽  
Surveillance System ◽  
Crime Scene ◽  
Detection Model ◽  
Detection Algorithms ◽  
Performance Metric ◽  
Smart Surveillance

The crime rates today can inevitably put a civilian's life in danger. While consistent efforts are being made to alleviate crime, there is also a dire need to create a smart and proactive surveillance system. Our project implements a smart surveillance system that would alert the authorities in real-time when a crime is being committed. During armed robberies and hostage situations, most often, the police cannot reach the place on time to prevent it from happening, owing to the lag in communication between the informants of the crime scene and the police. We propose an object detection model that implements deep learning algorithms to detect objects of violence such as pistols, knives, rifles from video surveillance footage, and in turn send real-time alerts to the authorities. There are a number of object detection algorithms being developed, each being evaluated under the performance metric mAP. On implementing Faster R-CNN with ResNet 101 architecture we found the mAP score to be about 91%. However, the downside to this is the excessive training and inferencing time it incurs. On the other hand, YOLOv5 architecture resulted in a model that performed very well in terms of speed. Its training speed was found to be 0.012 s / image during training but naturally, the accuracy was not as high as Faster R-CNN. With good computer architecture, it can run at about 40 fps. Thus, there is a tradeoff between speed and accuracy and it's important to strike a balance. We use transfer learning to improve accuracy by training the model on our custom dataset. This project can be deployed on any generic CCTV camera by setting up a live RTSP (real-time streaming protocol) and streaming the footage on a laptop or desktop where the deep learning model is being run.

Deep Learning Based Active Monitoring for Anti-collision between Vessels and Bridges

2019 ◽  
Author(s):  
Limu Chen ◽  
Ye Xia ◽  
Dexiong Pan ◽  
Chengbin Wang
Keyword(s):  
Decision Making ◽  
Deep Learning ◽  
Object Detection ◽  
Large Scale ◽  
Data Augmentation ◽  
Information Support ◽  
Single Shot ◽  
Active Monitoring ◽  
Detection Model ◽  
Comparison Results

<p>Deep-learning based navigational object detection is discussed with respect to active monitoring system for anti-collision between vessel and bridge. Motion based object detection method widely used in existing anti-collision monitoring systems is incompetent in dealing with complicated and changeable waterway for its limitations in accuracy, robustness and efficiency. The video surveillance system proposed contains six modules, including image acquisition, detection, tracking, prediction, risk evaluation and decision-making, and the detection module is discussed in detail. A vessel-exclusive dataset with tons of image samples is established for neural network training and a SSD (Single Shot MultiBox Detector) based object detection model with both universality and pertinence is generated attributing to tactics of sample filtering, data augmentation and large-scale optimization, which make it capable of stable and intelligent vessel detection. Comparison results with conventional methods indicate that the proposed deep-learning method shows remarkable advantages in robustness, accuracy, efficiency and intelligence. In-situ test is carried out at Songpu Bridge in Shanghai, and the results illustrate that the method is qualified for long-term monitoring and providing information support for further analysis and decision making.</p>

Sign in / Sign up

Export Citation Format

Share Document