scholarly journals LCA of a Consortium-Based MSW Management System to Quantify the Decrease in Environmental Impacts Achieved for Increasing Separate Collection Rates and Other Modifications

2019 ◽  
Vol 11 (10) ◽  
pp. 2810 ◽  
Author(s):  
Giulia Costa ◽  
Alessio Lieto ◽  
Francesco Lombardi
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Management System ◽  
Geographic Location ◽  
The Other ◽  
Residual Fraction ◽  
Collection Method ◽  
Msw Management ◽  
Environmental Savings

In this study, the collection, transport, and treatment phases (including the management of products and processing residues) of six fractions of municipal solid waste (MSW) generated in the Sinistra Piave Basin (Veneto, Italy), a consortium of 44 municipalities, were analyzed by life-cycle assessment (LCA). Specifically, two different scenarios were assessed for paper and cardboard, glass, multi-material (plastics and metals), food waste, garden waste, and dry residual fraction management, one referring to the year 2015 and the other to 2004. The primary aim was to investigate what consequences the increase in separate collection rates progressively achieved by the consortium (65% in 2004 versus to 80% in 2015) exerted on the management system and its potential environmental impacts. For each scenario, the type of separate collection method employed (door-to-door in 2015, and mixed door-to-door and curbside collection in 2004), the collected amounts, the geographic location of the main sorting/treatment plants, and the type of treatments applied to manage the products and processing residues were considered. The results of the study indicate that, among the variations that occurred in the management system for the two considered years, the increase in separate collection rate achieved was the factor that most affected all of the potential environmental impacts taken into account. In particular, for the 2015 scenario, differently from the 2004 one, all of the categories considered (apart from ecotoxicity) were negative, indicating savings instead of impacts. Treatment was the stage that by far mostly affected potential environmental savings, with regard to paper and cardboard recycling in particular.

Life cycle assessment of sub-units composing a MSW management system

2010 ◽  
Vol 18 (16-17) ◽  
pp. 1652-1662 ◽  
Author(s):  
L. Rigamonti ◽  
M. Grosso ◽  
M. Giugliano
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Management System ◽  
Msw Management

Using life cycle assessment to address stakeholders’ potential for improving municipal solid waste management

2017 ◽  
Vol 35 (5) ◽  
pp. 541-550 ◽  
Author(s):  
Milton Aurelio Uba de Andrade Junior ◽  
Guillherme Marcelo Zanghelini ◽  
Sebastião Roberto Soares
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Urban Areas ◽  
Management System ◽  
Waste Paper ◽  
Municipal Solid Waste Management ◽  
Paper Recycling ◽  
Msw Management

Because the consumption of materials is generally higher than their recovery rate, improving municipal solid waste (MSW) management is fundamental for increasing the efficiency of natural resource use and consumption in urban areas. More broadly, the characteristics of a MSW management system influence the end-of-life (EOL) impacts of goods consumed by households. We aim to indicate the extent to which greenhouse gas emissions from a MSW management system can be reduced by increasing waste paper recycling. We also address the stakeholders’ contribution for driving transition towards an improved scenario. Life cycle assessment (LCA) addresses the EOL impacts of the paper industry, driven by the characteristics of MSW management in Florianópolis, Brazil, by varying the level of stakeholders’ commitment through different recycling scenarios. The results show that 41% of the climate change impacts from waste paper management could be reduced when increasing the waste paper recycling rates and reducing waste paper landfilling. To achieve such emissions reduction, the industry contribution to the MSW management system would have to increase from 17% in the business-as-usual scenario to 74% in the target scenario. We were able to measure the differences in stakeholders’ contribution by modelling the MSW management system processes that are under the industry’s responsibility separately from the processes that are under the government’s responsibility, based on the Brazilian legal framework. The conclusions indicate that LCA can be used to support policy directions on reducing the impacts of MSW management by increasing resource recovery towards a circular economy.

scholarly journals Environmental Consequences of Closing the Textile Loop—Life Cycle Assessment of a Circular Polyester Jacket

2021 ◽  
Vol 11 (7) ◽  
pp. 2964
Author(s):  
Gregor Braun ◽  
Claudia Som ◽  
Mélanie Schmutz ◽  
Roland Hischier
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Circular Economy ◽  
Textile Industry ◽  
System Analysis ◽  
Action Plan ◽  
The European Union ◽  
Environmental Consequences ◽  
Energy And Material Flows

The textile industry is recognized as being one of the most polluting industries. Thus, the European Union aims to transform the textile industry with its “European Green Deal” and “Circular Economy Action Plan”. Awareness regarding the environmental impact of textiles is increasing and initiatives are appearing to make more sustainable products with a strong wish to move towards a circular economy. One of these initiatives is wear2wearTM, a collaboration consisting of multiple companies aiming to close the loop for polyester textiles. However, designing a circular product system does not lead automatically to lower environmental impacts. Therefore, a Life Cycle Assessment study has been conducted in order to compare the environmental impacts of a circular with a linear workwear jacket. The results show that a thoughtful “circular economy system” design approach can result in significantly lower environmental impacts than linear product systems. The study illustrates at the same time the necessity for Life Cycle Assessment practitioners to go beyond a simple comparison of one product to another when it comes to circular economy. Such products require a wider system analysis approach that takes into account multiple loops, having interconnected energy and material flows through reuse, remanufacture, and various recycling practices.

scholarly journals Life Cycle Assessment of Households in Santiago, Chile: Environmental Hotspots and Policy Analysis

2021 ◽  
Vol 13 (5) ◽  
pp. 2525
Author(s):  
Camila López-Eccher ◽  
Elizabeth Garrido-Ramírez ◽  
Iván Franchi-Arzola ◽  
Edmundo Muñoz
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Food Consumption ◽  
Household Income ◽  
Resource Scarcity ◽  
Life Cycles ◽  
The Impact ◽  
Freshwater Eutrophication

The aim of this study is to assess the environmental impacts of household life cycles in Santiago, Chile, by household income level. The assessment considered scenarios associated with environmental policies. The life cycle assessment was cradle-to-grave, and the functional unit considered all the materials and energy required to meet an inhabitant’s needs for one year (1 inh/year). Using SimaPro 9.1 software, the Recipe Midpoint (H) methodology was used. The impact categories selected were global warming, fine particulate matter formation, terrestrial acidification, freshwater eutrophication, freshwater ecotoxicity, mineral resource scarcity, and fossil resource scarcity. The inventory was carried out through the application of 300 household surveys and secondary information. The main environmental sources of households were determined to be food consumption, transport, and electricity. Food consumption is the main source, responsible for 33% of the environmental impacts on global warming, 69% on terrestrial acidification, and 29% on freshwater eutrophication. The second most crucial environmental hotspot is private transport, whose contribution to environmental impact increases as household income rises, while public transport impact increases in the opposite direction. In this sense, both positive and negative environmental effects can be generated by policies. Therefore, life-cycle environmental impacts, the synergy between policies, and households’ socio-economic characteristics must be considered in public policy planning and consumer decisions.

scholarly journals Sustainability Assessment with Integrated Circular Economy Principles: A Toy Case Study

2021 ◽  
Vol 13 (7) ◽  
pp. 3856
Author(s):  
Rebeka Kovačič Lukman ◽  
Vasja Omahne ◽  
Damjan Krajnc
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Circular Economy ◽  
Social Life ◽  
Product Life Cycle ◽  
Sustainability Assessment ◽  
Social Impacts ◽  
Life Cycle Costing ◽  
Social Life Cycle Assessment

When considering the sustainability of production processes, research studies usually emphasise environmental impacts and do not adequately address economic and social impacts. Toy production is no exception when it comes to assessing sustainability. Previous research on toys has focused solely on assessing environmental aspects and neglected social and economic aspects. This paper presents a sustainability assessment of a toy using environmental life cycle assessment, life cycle costing, and social life cycle assessment. We conducted an inventory analysis and sustainability impact assessment of the toy to identify the hotspots of the system. The main environmental impacts are eutrophication, followed by terrestrial eco-toxicity, acidification, and global warming. The life cycle costing approach examined the economic aspect of the proposed design options for toys, while the social assessment of the alternative designs revealed social impacts along the product life cycle. In addition, different options based on the principles of the circular economy were analysed and proposed in terms of substitution of materials and shortening of transport distances for the toy studied.

scholarly journals Analysis of the Characteristics of Environmental Impacts According to the Cut-Off Criteria Applicable to the Streamlined Life Cycle Assessment (S-LCA) of Apartment Buildings in South Korea

2021 ◽  
Vol 13 (5) ◽  
pp. 2898
Author(s):  
Rakhyun Kim ◽  
Myung-Kwan Lim ◽  
Seungjun Roh ◽  
Won-Jun Park
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Impact Analysis ◽  
Impact Categories ◽  
Environmental Impact Analysis ◽  
Apartment Buildings ◽  
Environmental Impact Categories ◽  
Weight Percentile

This study analyzed the characteristics of the environmental impacts of apartment buildings, a typical housing type in South Korea, as part of a research project supporting the streamlined life cycle assessment (S-LCA) of buildings within the G-SEED (Green Standard for Energy and Environmental Design) framework. Three recently built apartment building complexes were chosen as study objects for the quantitative evaluation of the buildings in terms of their embodied environmental impacts (global warming potential, acidification potential, eutrophication potential, ozone layer depletion potential, photochemical oxidant creation potential, and abiotic depletion potential), using the LCA approach. Additionally, we analyzed the emission trends according to the cut-off criteria of the six environmental impact categories by performing an S-LCA with cut-off criteria 90–99% of the cumulative weight percentile. Consequently, we were able to present the cut-off criterion best suited for S-LCA and analyze the effect of the cut-off criteria on the environmental impact analysis results. A comprehensive environmental impact analysis of the characteristics of the six environmental impact categories revealed that the error rate was below 5% when the cut-off criterion of 97.5% of the cumulative weight percentile was applied, thus verifying its validity as the optimal cut-off criterion for S-LCA.

scholarly journals Life-Cycle Assessment of a Rural Terraced House: A Struggle with Sustainability of Building Renovations

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2472
Author(s):  
Karel Struhala ◽  
Milan Ostrý
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Energy Sources ◽  
Construction Sector ◽  
Building Stock ◽  
Existing Building ◽  
New Construction ◽  
Consumption Energy

Contemporary research stresses the need to reduce mankind’s environmental impacts and achieve sustainability. One of the keys to this is the construction sector. New buildings have to comply with strict limits regarding resource consumption (energy, water use, etc.). However, they make up only a fraction of the existing building stock. Renovations of existing buildings are therefore essential for the reduction of the environmental impacts in the construction sector. This paper illustrates the situation using a case study of a rural terraced house in a village near Brno, Czech Republic. It compares the life-cycle assessment (LCA) of the original house and its proposed renovation as well as demolition followed by new construction. The LCA covers both the initial embodied environmental impacts (EEIs) and the 60-year operation of the house with several variants of energy sources. The results show that the proposed renovation would reduce overall environmental impacts (OEIs) of the house by up to 90% and the demolition and new construction by up to 93% depending on the selected energy sources. As such, the results confirm the importance of renovations and the installation of environmentally-friendly energy sources for achieving sustainability in the construction sector. They also show the desirability of the replacement of inefficient old buildings by new construction in specific cases.

Sign in / Sign up

Export Citation Format

Share Document