scholarly journals A Multi-disciplinary Modelling Approach for Discharge Reconstruction in Irrigation Canals: The Canale Emiliano Romagnolo (Northern Italy) Case Study

Water ◽  
2018 ◽  
Vol 10 (8) ◽  
pp. 1017 ◽  
Author(s):  
Marta Luppi ◽  
Pierre-Olivier Malaterre ◽  
Adriano Battilani ◽  
Vittorio Di Federico ◽  
Attilio Toscano
Keyword(s):  
Complex Geometry ◽  
Northern Italy ◽  
Control Flow ◽  
Data Availability ◽  
Water Losses ◽  
Simple Geometry ◽  
Status Data ◽  
Discharge Estimation ◽  
And Control

Agriculture is the biggest consumer of water in the world, and therefore, in order to mitigate the effects of climate change, and consequently water scarcity, it is important to reduce irrigation water losses and to improve the poor collection of hydraulic status data. Therefore, efficiency has to be increased, and the regulation and control flow should be implemented. Hydraulic modelling represents a strategic tool for the reconstruction of the missing hydraulic data. This paper proposes a methodology for the unmeasured offtake and flowing discharge estimation along the open-canal Canale Emiliano Romagnolo (CER), which is one of the major irrigation infrastructures in Northern Italy. The “multi-disciplinary approach” that was adopted refers to agronomic and hydraulic aspects. The tools that were used are the IRRINET management Decisional Support System (DSS) and the SIC2 (Simulation and Integration of Control for Canals) hydraulic software. Firstly, the methodology was developed and tested on a Pilot Segment (PS), characterized by a simple geometry and a quite significant historical hydraulic data availability. Then, it was applied on an Extended Segment (ES) of a more complex geometry and hydraulic functioning. Moreover, the available hydraulic data are scarce. The combination of these aspects represents a crucial issue in the irrigation networks in general.

SIMULATION AND CONTROL OF FLOODS IN A WATER NETWORK. CASE STUDY OF JIJIA RIVER CATCHMENT

2017 ◽  
Vol 16 (3) ◽  
pp. 587-595
Author(s):  
Vasile Mircea Cristea ◽  
Ph.m Thai Hoa ◽  
Mihai Mogos-Kirner ◽  
Csavdari Alexandra ◽  
Paul Serban Agachi
Keyword(s):  
Water Network ◽  
River Catchment ◽  
Simulation And Control ◽  
And Control

Case study: Simulation and control of high frequency noise for commercial vehicle cab considering leak

2019 ◽  
Vol 67 (4) ◽  
pp. 315-329
Author(s):  
Rongjiang Tang ◽  
Zhe Tong ◽  
Weiguang Zheng ◽  
Shenfang Li ◽  
Li Huang
Keyword(s):  
High Frequency ◽  
Commercial Vehicle ◽  
Frequency Noise ◽  
High Frequency Noise ◽  
Simulation And Control ◽  
And Control

Obesity management through Ayurveda - A Case Study

2017 ◽  
Vol 2 (4) ◽  
Author(s):  
Dheeraj Kumar Tyagi ◽  
Shivakumar .
Keyword(s):  
Clinical Findings ◽  
Dietary Habit ◽  
Unhealthy Lifestyle ◽  
Lifestyle Management ◽  
Before And After ◽  
Effect Of Treatment ◽  
And Control

Lifestyle disorders are one of the biggest threats for the population living unhealthy lifestyle. Sthoulya (Obesity) is one such disorder which creates lot of physical as well as mental disorder to the sufferer. Due to changing lifestyle, comforts and dietary habit lots of individuals changed their life totally. Obesity is a growing disease in developed and developing countries. Prevalence is drastically hike in past few years. Ayurveda, the science of life with which we can manage and control lots of lifestyle disorders. Focusing on dietary and lifestyle management along with treatment, we can overcome the hazards of obesity which is growing in a uncontrolled manner. The available data is based on the clinical findings only. Aim and objective: To assess the effect of “Guru Cha Atarpanam Chikitsa” in the management of Sthoulya. Setting: Swastharakshana evam Yoga, OPD and IPD, SDMCAH, Hassan. Method: Udwarthana, Parisheka, Shamana Aushadhis, Ahara, and Vihara was followed within the treatment duration and effect of treatment was assessed before and after treatment, advised for follow up. Results: The treatment adopted is effective in the management of Sthoulya and to improve the quality of life.

A case study of wear-type rail corrugation prediction and control using speed variation

2009 ◽  
Vol 325 (1-2) ◽  
pp. 85-105 ◽  
Author(s):  
P.A. Meehan ◽  
P.A. Bellette ◽  
R.D. Batten ◽  
W.J.T. Daniel ◽  
R.J. Horwood
Keyword(s):  
Rail Corrugation ◽  
Speed Variation ◽  
Prediction And Control ◽  
And Control

scholarly journals Rotary steerable systems: mathematical modeling and their case study

2021 ◽  
Vol 11 (6) ◽  
pp. 2743-2761
Author(s):  
Caetano P. S. Andrade ◽  
J. Luis Saavedra ◽  
Andrzej Tunkiel ◽  
Dan Sui
Keyword(s):  
Directional Drilling ◽  
Steering Control ◽  
Fundamental Physics ◽  
Drilling Tools ◽  
Drilling Operations ◽  
Beam Bending ◽  
Extended Reach Drilling ◽  
And Control ◽  
2D And 3D

AbstractDirectional drilling is a common and essential procedure of major extended reach drilling operations. With the development of directional drilling technologies, the percentage of recoverable oil production has increased. However, its challenges, like real-time bit steering, directional drilling tools selection and control, are main barriers leading to low drilling efficiency and high nonproductive time. The fact inspires this study. Our work aims to contribute to the better understanding of directional drilling, more specifically regarding rotary steerable system (RSS) technology. For instance, finding the solutions of the technological challenges involved in RSSs, such as bit steering control, bit position calculation and bit speed estimation, is the main considerations of our study. Classical definitions from fundamental physics including Newton’s third law, beam bending analysis, bit force analysis, rate of penetration (ROP) modeling are employed to estimate bit position and then conduct RSS control to steer the bit accordingly. The results are illustrated in case study with the consideration of the 2D and 3D wellbore scenarios.

scholarly journals Integrating dark diversity and functional traits to enhance nature conservation of epiphytic lichens: a case study from Northern Italy

2021 ◽  
Author(s):  
Diego Pires Ferraz Trindade ◽  
Meelis Pärtel ◽  
Carlos Pérez Carmona ◽  
Tiina Randlane ◽  
Juri Nascimbene
Keyword(s):  
Climate Change ◽  
Nature Conservation ◽  
Functional Traits ◽  
Growth Form ◽  
Northern Italy ◽  
Epiphytic Lichens ◽  
Mountain Areas ◽  
High Elevations ◽  
Harsh Conditions

AbstractMountains provide a timely opportunity to examine the potential effects of climate change on biodiversity. However, nature conservation in mountain areas have mostly focused on the observed part of biodiversity, not revealing the suitable but absent species—dark diversity. Dark diversity allows calculating the community completeness, indicating whether sites should be restored (low completeness) or conserved (high completeness). Functional traits can be added, showing what groups should be focused on. Here we assessed changes in taxonomic and functional observed and dark diversity of epiphytic lichens along elevational transects in Northern Italy spruce forests. Eight transects (900–1900 m) were selected, resulting in 48 plots and 240 trees, in which lichens were sampled using four quadrats per tree (10 × 50 cm). Dark diversity was estimated based on species co-occurrence (Beals index). We considered functional traits related to growth form, photobiont type and reproductive strategy. Linear and Dirichlet regressions were used to examine changes in taxonomic metrics and functional traits along gradient. Our results showed that all taxonomic metrics increased with elevation and functional traits of lichens differed between observed and dark diversity. At low elevations, due to low completeness and harsh conditions, both restoration and conservation activities are needed, focusing on crustose species. Towards high elevations, conservation is more important to prevent species pool losses, focusing on macrolichens, lichens with Trentepohlia and sexual reproduction. Finally, dark diversity and functional traits provide a novel tool to enhance nature conservation, indicating particular threatened groups, creating windows of opportunities to protect species from both local and regional extinctions.

scholarly journals Creating and Maintaining Structural Hindrances to Criminal Justice Control – A Policy Analysis on the Normalisation of Parental Violence as a Crime in Finland

2021 ◽  
pp. 096466392110208
Author(s):  
Riikka Kotanen
Keyword(s):  
Criminal Justice ◽  
Criminal Law ◽  
Interpersonal Violence ◽  
Legal Regulation ◽  
Division Of Labour ◽  
Legal Form ◽  
Parental Violence ◽  
Control Policies ◽  
And Control

In the context of home, violence remains more accepted when committed against children than adults. Normalisation of parental violence has been documented in attitudinal surveys, professional practices, and legal regulation. For example, in many countries violent disciplining of children is the only legal form of interpersonal violence. This study explores the societal invisibility and normalisation of parental violence as a crime by analysing legislation and control policies regulating the division of labour and involvement between social welfare and criminal justice authorities. An empirical case study from Finland, where all forms of parental violence were legally prohibited in 1983, is used to elucidate the divergence between (criminal) law and control policies. The analysis demonstrates how normalisation operates at the policy-level where, within the same system of control that criminalised these acts, structural hindrances are built to prevent criminal justice interventions.

scholarly journals The Enabling Role of Digital Technologies in Sustainability Accounting: Findings from Norwegian Manufacturing Companies

Systems ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 33
Author(s):  
Olena Klymenko ◽  
Lise Lillebrygfjeld Halse ◽  
Bjørn Jæger
Keyword(s):  
Research Area ◽  
Digital Data ◽  
Manufacturing Companies ◽  
Sustainable Operations ◽  
Business Model Canvas ◽  
Automation And Control ◽  
Sustainability Accounting ◽  
And Control

Sustainability accounting is an emerging research area receiving growing awareness. This study examines the role of digital technology in manufacturing companies’ sustainability accounting. To guide the research, we use a triple layered business model canvas, which supports the accounting of a manufacturer’s performance for the economic, environmental, and social aspects of sustainability. We present an explorative case study of four Norwegian manufacturing companies representing different industries. The findings from the study indicate that while accounting for economic values is well taken care of, companies do not perform comprehensive environmental and social accounting. Furthermore, we observed a shift from a focus on sustainability issues related to the internal manufacturing process to a focus on sustainability issues for the life cycle of the product. Even though the manufacturers are at the forefront with regard to automation and control of production, with extensive use of robots giving a large amount of data, these data are not utilized towards sustainability accounting, showing that sustainability and digitalization are seen as two separate phenomena. This study sheds light on how digital data available from applied Industry 4.0 technologies could enhance sustainability accounting with limited efforts, linking sustainability and digitalization. The results provide insights for manufacturers and researchers in moving towards more sustainable operations and products.

Directed earned value management based on ordered fuzzy numbers

2021 ◽  
pp. 1-14
Author(s):  
Seyed Taha Hossein Mortaji ◽  
Siamak Noori ◽  
Morteza Bagherpour
Keyword(s):  
Fuzzy Numbers ◽  
Lower Cost ◽  
Project Managers ◽  
Value Management ◽  
Monitoring And Control ◽  
Earned Value ◽  
Earned Value Management ◽  
Project Monitoring ◽  
And Control

Earned value management is well-known as the most efficient method of project monitoring and control providing relatively reliable information about the project performance. However, this method requires accurate estimates of the progress of project activities, which are always associated with uncertainties that, if ignored or not addressed well, lead to incorrect results. To address this issue, the application of multi-valued logic, in particular fuzzy logic, in earned value management has recently attracted a lot of attention both in practice and research. This paper introduces directed earned value management (DEVM) in which ordered fuzzy numbers are used to express the so-called uncertainties as well as to capture more information about the trend of the project progress. To evaluate the performance of the proposed method, several numerical examples and a case study are presented. The results reveal that compared to the existing methods, DEVM has a lower computational complexity. Also, it doesn’t suffer from the overestimation effect and as a result, it has a higher ability to express project-specific dynamics. In sum, the proposed method allows project managers to make informed decisions that lead to taking preventive and corrective actions promptly and at a lower cost.

Sign in / Sign up

Export Citation Format

Share Document