Cinematography. Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film

2005 ◽  
Keyword(s):  
Spectral Response

Some Recent Results in Quiescent Prominence Spectrometry

1979 ◽  
Vol 44 ◽  
pp. 41-47
Author(s):  
Donald A. Landman
Keyword(s):  
Real Time ◽  
Computer System ◽  
Spectral Response ◽  
Absolute Intensity ◽  
Solar Observatory ◽  
Target Size ◽  
Small Target ◽  
Signal Averaging ◽  
Quiescent Prominence

This paper describes some recent results of our quiescent prominence spectrometry program at the Mees Solar Observatory on Haleakala. The observations were made with the 25 cm coronagraph/coudé spectrograph system using a silicon vidicon detector. This detector consists of 500 contiguous channels covering approximately 6 or 80 Å, depending on the grating used. The instrument is interfaced to the Observatory’s PDP 11/45 computer system, and has the important advantages of wide spectral response, linearity and signal-averaging with real-time display. Its principal drawback is the relatively small target size. For the present work, the aperture was about 3″ × 5″. Absolute intensity calibrations were made by measuring quiet regions near sun center.

Analysis of the Bias Dependent Spectral Response of a-SiC:H p-i-n Photodiode

2002 ◽  
Vol 715 ◽  
Author(s):  
P. Louro ◽  
A. Fantoni ◽  
Yu. Vygranenko ◽  
M. Fernandes ◽  
M. Vieira
Keyword(s):  
Bias Voltage ◽  
Voltage Dependence ◽  
Spectral Response ◽  
Surface Recombination ◽  
Electrical Field ◽  
Field Reversal ◽  
Current Voltage ◽  
Voltage Dependent ◽  
And Inversion ◽  
Device Operation

AbstractThe bias voltage dependent spectral response (with and without steady state bias light) and the current voltage dependence has been simulated and compared to experimentally obtained values. Results show that in the heterostructures the bias voltage influences differently the field and the diffusion part of the photocurrent. The interchange between primary and secondary photocurrent (i. e. between generator and load device operation) is explained by the interaction of the field and the diffusion components of the photocurrent. A field reversal that depends on the light bias conditions (wavelength and intensity) explains the photocurrent reversal. The field reversal leads to the collapse of the diode regime (primary photocurrent) launches surface recombination at the p-i and i-n interfaces which is responsible for a double-injection regime (secondary photocurrent). Considerations about conduction band offsets, electrical field profiles and inversion layers will be taken into account to explain the optical and voltage bias dependence of the spectral response.

USGS spectral response maps and their relationship with seismic design forces in building codes

1995 ◽  
Author(s):  
E.V. Leyendecker ◽  
D.M. Perkins ◽  
Sylvester Theodore Algermissen ◽  
P.C. Thenhaus ◽  
S.L. Hanson
Keyword(s):  
Seismic Design ◽  
Spectral Response ◽  
Building Codes

scholarly journals Growth Stages Classification of Potato Crop Based on Analysis of Spectral Response and Variables Optimization

Sensors ◽  
2020 ◽  
Vol 20 (14) ◽  
pp. 3995 ◽  
Author(s):  
Ning Liu ◽  
Ruomei Zhao ◽  
Lang Qiao ◽  
Yao Zhang ◽  
Minzan Li ◽  
...  
Keyword(s):  
Growth Stage ◽  
Spectral Response ◽  
Classification Model ◽  
Growth Stages ◽  
Potato Field ◽  
Spectral Bands ◽  
Svm Model ◽  
Selection Algorithms ◽  
Potato Crops

Potato is the world’s fourth-largest food crop, following rice, wheat, and maize. Unlike other crops, it is a typical root crop with a special growth cycle pattern and underground tubers, which makes it harder to track the progress of potatoes and to provide automated crop management. The classification of growth stages has great significance for right time management in the potato field. This paper aims to study how to classify the growth stage of potato crops accurately on the basis of spectroscopy technology. To develop a classification model that monitors the growth stage of potato crops, the field experiments were conducted at the tillering stage (S1), tuber formation stage (S2), tuber bulking stage (S3), and tuber maturation stage (S4), respectively. After spectral data pre-processing, the dynamic changes in chlorophyll content and spectral response during growth were analyzed. A classification model was then established using the support vector machine (SVM) algorithm based on spectral bands and the wavelet coefficients obtained from the continuous wavelet transform (CWT) of reflectance spectra. The spectral variables, which include sensitive spectral bands and feature wavelet coefficients, were optimized using three selection algorithms to improve the classification performance of the model. The selection algorithms include correlation analysis (CA), the successive projection algorithm (SPA), and the random frog (RF) algorithm. The model results were used to compare the performance of various methods. The CWT-SPA-SVM model exhibited excellent performance. The classification accuracies on the training set (Atrain) and the test set (Atest) were respectively 100% and 97.37%, demonstrating the good classification capability of the model. The difference between the Atrain and accuracy of cross-validation (Acv) was 1%, which showed that the model has good stability. Therefore, the CWT-SPA-SVM model can be used to classify the growth stages of potato crops accurately. This study provides an important support method for the classification of growth stages in the potato field.

scholarly journals Pansharpening of WorldView-2 Data via Graph Regularized Sparse Coding and Adaptive Coupled Dictionary

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3586
Author(s):  
Wenqing Wang ◽  
Han Liu ◽  
Guo Xie
Keyword(s):  
High Resolution ◽  
Sparse Representation ◽  
Sparse Coding ◽  
Spectral Response ◽  
Objective Evaluation ◽  
Coefficient Matrix ◽  
Image Patch ◽  
Subjective Analysis ◽  
High Resolution Image ◽  
Sparse Coefficient

The spectral mismatch between a multispectral (MS) image and its corresponding panchromatic (PAN) image affects the pansharpening quality, especially for WorldView-2 data. To handle this problem, a pansharpening method based on graph regularized sparse coding (GRSC) and adaptive coupled dictionary is proposed in this paper. Firstly, the pansharpening process is divided into three tasks according to the degree of correlation among the MS and PAN channels and the relative spectral response of WorldView-2 sensor. Then, for each task, the image patch set from the MS channels is clustered into several subsets, and the sparse representation of each subset is estimated through the GRSC algorithm. Besides, an adaptive coupled dictionary pair for each task is constructed to effectively represent the subsets. Finally, the high-resolution image subsets for each task are obtained by multiplying the estimated sparse coefficient matrix by the corresponding dictionary. A variety of experiments are conducted on the WorldView-2 data, and the experimental results demonstrate that the proposed method achieves better performance than the existing pansharpening algorithms in both subjective analysis and objective evaluation.

scholarly journals Microcrack Detection Using Spectral Response Data Alone

2021 ◽  
Vol 11 (8) ◽  
pp. 3655
Author(s):  
Gee-Soo Lee ◽  
Chan-Jung Kim
Keyword(s):  
Spectral Response ◽  
Coherence Function ◽  
Cold Forming ◽  
Response Data ◽  
Highly Sensitive ◽  
Bending Mode ◽  
Out Of Plane ◽  
Rectangular Specimen ◽  
Microcrack Detection ◽  
Impulse Force

Microcracks of depth less than 200 μm in mechanical components are difficult to detect because conventional methods such as X-ray or eddy current measurements are less sensitive to such depths. Nonetheless, an efficient microcrack detection method is required urgently in the mechanical industry because microcracks are produced frequently during cold-forming. The frequency response function (FRF) is known to be highly sensitive even to microcracks, and it can be obtained using both the input data of an impact hammer and the response data of an accelerometer. Under the assumption of an impulse force with a similar spectral impulse pattern, spectral response data alone could be used as a crack indicator because the dynamic characteristics of a microcrack may be dependent solely on these measured data. This study investigates the feasibility of microcrack detection using the response data alone through impact tests with a simple rectangular specimen. A simple rectangular specimen with a 200 μm microcrack at one face was prepared. The experimental modal analysis was conducted for the normal (uncracked) specimen and found-first bending mode about 1090 Hz at the X-Y plane (in-plane). Response accelerations were obtained in both at in-plane locations as well as X-Z plane (out-of-plane), and the crack was detected using the coherence function between a normal and a cracked specimen. A comparison of the crack inspection results obtained using the response data and the FRF data indicated the validity of the proposed method.

Sign in / Sign up

Export Citation Format

Share Document