Selection of Wear Resistive Nano coating in En8 Steel

2019 ◽  
Vol 1 (2) ◽  
pp. 73-80
Author(s):  
Ilangkumaran M ◽  
Tiruvenkadam N ◽  
Saranya M ◽  
Thulsidharan R
Keyword(s):  
Mild Steel ◽  
Mechanical Action ◽  
Medium Carbon Steel ◽  
Solid Surfaces ◽  
Material Surface ◽  
Multi Criteria Decision Making ◽  
Sliding Surface ◽  
Medium Carbon ◽  
Nano Coating ◽  
Selection Of

Where is the abrasive or gradual removal of materials at solid surfaces? It is caused due to the interaction between the sliding surface by mechanical action. The abrasive wears can be recognised as scratches or grooves. To enhance the wear resistance suitable nanocoating is applied on the material surface for better tribological properties such as hardness and toughness. Wear resistant nanocoating is used to reduce or eradicate wear to extend the lifetime of the EN8 steel. EN8 is unalloyed medium carbon steel with better mechanical properties than mild steel and also readily machinable in any condition. The nanocoating materials such as Al2O3, TiO2, SiC, ZrO2, WS2, Si3N4 etc., are used to reduce wear and to enhance hardness and toughness on mild steel through various nanocoating techniques. This paper deals with selection of suitable nanocoating material through AHP (Analytical hierarchal process) - a multi-criteria decision-making method.

INFLUENCE THE QUENCHING AND TEMPERING ON THE MICROSTRUCTURE, MECHANICAL PROPERTIES AND SURFACE ROUGHNESS, OF MEDIUM CARBON STEEL

2018 ◽  
Vol 18 (1) ◽  
pp. 125-135
Author(s):  
Sattar H A Alfatlawi
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Surface Roughness ◽  
Carbon Steel ◽  
Cold Water ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Heating And Cooling ◽  
Treatment Processes ◽  
Quenching And Tempering

One of ways to improve properties of materials without changing the product shape toobtain the desired engineering applications is heating and cooling under effect of controlledsequence of heat treatment. The main aim of this study was to investigate the effect ofheating and cooling on the surface roughness, microstructure and some selected propertiessuch as the hardness and impact strength of Medium Carbon Steel which treated at differenttypes of heat treatment processes. Heat treatment achieved in this work was respectively,heating, quenching and tempering. The specimens were heated to 850°C and left for 45minutes inside the furnace as a holding time at that temperature, then quenching process wasperformed in four types of quenching media (still air, cold water (2°C), oil and polymersolution), respectively. Thereafter, the samples were tempered at 200°C, 400°C, and 600°Cwith one hour as a soaking time for each temperature, then were all cooled by still air. Whenthe heat treatment process was completed, the surface roughness, hardness, impact strengthand microstructure tests were performed. The results showed a change and clearimprovement of surface roughness, mechanical properties and microstructure afterquenching was achieved, as well as the change that took place due to the increasingtoughness and ductility by reducing of brittleness of samples.

Selection of Contractor Using Multi-Criteria Decision Making Tools

2011 ◽  
Vol 4 (4) ◽  
pp. 139-142
Author(s):  
S.PUSHPARANI S.PUSHPARANI ◽  
◽  
Dr.S.SENTHAMILKUMAR Dr.S.SENTHAMILKUMAR
Keyword(s):  
Decision Making ◽  
Multi Criteria Decision Making ◽  
Selection Of

Sistem Pendukung Keputusan SNMPTN Jalur Undangan Dengan Metode Electre

2018 ◽  
Vol 3 ◽  
pp. 14
Author(s):  
Lidia K Simanjuntak ◽  
Tessa Y M Sihite ◽  
Mesran Mesran ◽  
Nuning Kurniasih ◽  
Yuhandri Yuhandri
Keyword(s):  
Decision Making ◽  
Decision Support ◽  
Decision Support System ◽  
Support System ◽  
Action Selection ◽  
Multi Criteria Decision Making ◽  
Prospective Students ◽  
College Entrance ◽  
Electre Method ◽  
Selection Of

All colleges each year organize the selection of new admissions. Acceptance of prospective students in universities as education providers is done by selecting prospective students based on achievement in school and college entrance selection. To select the best student candidates based on predetermined criteria, then use Multi-Criteria Decision Making (MCDM) or commonly called decision support system. One method in MCDM is the Elimination Et Choix Traduisant la Reality (ELECTRE). The ELECTRE method is the best method of action selection. The ELECTRE method to obtain the best alternative by eliminating alternative that do not fit the criteria and can be applied to the decision SNMPTN invitation path.

AISI 1025

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Cold Worked

Abstract AISI 1025 is a low-to-medium-carbon steel used in the hot-worked, cold-worked, normalized or water-quenched-and-tempered condition for general-purpose construction and engineering. It is also used for case-hardened components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-47. Producer or source: Carbon and alloy steel mills.

AISI 1040

Alloy Digest ◽  
1971 ◽  
Vol 20 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Cost ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract AISI 1040 is a medium-carbon steel used in the hot-rolled, normalized, oil quenched and tempered or water quenched and tempered condition for general purpose engineering and construction. It provides medium strength and toughness at low cost. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-41. Producer or source: Carbon and alloy steel mills.

AISI 1551

Alloy Digest ◽  
1980 ◽  
Vol 29 (2) ◽  
Keyword(s):  
Carbon Steel ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Hand Tools ◽  
Medium Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1551 is a medium-carbon steel containing relatively high manganese (0.85-1.15%) for a carbon steel. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for numerous applications. It has a combination of good machinability and good workability. Its many uses include hand tools, machinery parts, springs and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-80. Producer or source: Carbon steel mills.

SAE 1037

Alloy Digest ◽  
1979 ◽  
Vol 28 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Cost ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract SAE 1037 is a carbon steel that provides medium strength and medium toughness at low cost. It is used in the hot-rolled, normalized, oil-quenched-and-tempered and water-quenched-and-tempered conditions. This medium-carbon steel is used for construction and for general-purpose engineering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-76. Producer or source: Carbon steel mills.

SAE 1026

Alloy Digest ◽  
1976 ◽  
Vol 25 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Medium Carbon ◽  
The Core ◽  
Steel Mills ◽  
Cold Worked ◽  
Good Workability

Abstract SAE 1026 is a low-to-medium-carbon steel used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for a variety of engineering and construction applications. It combines good workability (hot or cold), good machinability and good weldability. It has relatively high manganese (0.60-0.90%); this provides increased hardenability which is reflected in all uses and gives somewhat increased hardness and strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-60. Producer or source: Carbon steel mills.

Sign in / Sign up

Export Citation Format

Share Document