scholarly journals Efektivitas Tata Letak Gudang Baru untuk Menekan Tingkat Kerusakan Produk Menggunakan Metode Class Based Storage

2020 ◽  
Vol 4 (2) ◽  
pp. 100
Author(s):  
Widy Setyawan ◽  
Fahmi Reza Fauzi
Keyword(s):  
Material Handling ◽  
Layout Design ◽  
Storage Method ◽  
Class A ◽  
Abc Classification ◽  
Handling Cost ◽  
Material Handling Cost ◽  
Block Area ◽  
New Space ◽  
Block Based

Abstract— U.D. BAROKAH is engaged in the fulfillment of agricultural needs that will move products from the old warehouse to the new warehouse, products include: fertilizers (subsidies and non-subsidies), seeds, and pesticides. The old warehouse with an area of 150m2 and a new warehouse that has an area of 400m2. To streamline the new space and hopefully can reduce the level of damage to the product then, layout layout design is made using 2 methods of ABC classification and Class Based Storage Method. The product is placed in accordance with its activities, looking at the demand of November 2017 which shows the percentage value close to grade A 80%, B15%, and C5% grade. So make the area block based on the class, the area of the block area used class A 49m2, B 14m2, and C10m2. From the results calculated to determine the effectiveness of the warehouse mathematically by using the calculation of Material Handling Cost, the result of the calculation is Rp 375.321,60 per month.Keywords : ABC Classification , Class Based Storage, and Material Handling Cost Abstrak— U.D. BAROKAH yang bergerak dalam bidang pemenuhan kebutuhan pertanian yang akan memindahkan produk dari gudang lama ke gudang yang baru, produk meliputi: pupuk (subsidi dan non subsidi), bibit, dan pestisida. Gudang lama dengan luas 150m2 dan gudang baru yang mempunyai luas 400 m2. Untuk mengefektifkan luas ruangan baru dan diharapkan bisa menekan tingkat kerusakan pada produk maka, perancangan tata letak layout dibuat menggunakan 2 metode yaitu klasifikasi ABC dan Metode Class Based Storage. Produk ditempatkan sesuai dengan aktifitasnya, melihat dari permintaan bulan November 2017 yang menunjukan nilai persentase mendekati untuk kelas A 80%, B 15% , dan kelas C 5%. Sehingga di buatlah blok area berdasarkan kelas tersebut, luas block area yang terpakai kelas A 49 m2, B 14m2, dan C 10 m2. Dari hasil tersebut dihitung untuk mengetahui efektifitas gudang secara matematis dengan menggunakan perhitungan Ongkos Material Handling, hasil dari pehitungan tersebut adalah Rp 375.321,60 per bulan.Kata kunci : Klasifikasi ABC, Class Based Storage, Ongkos Material Handling

scholarly journals Analisa Perbaikan Tata Letak Penempatan Bahan Bakudi Area Gudang Penyimpanan

2021 ◽  
Vol 10 (2) ◽  
Author(s):  
Beni Harma ◽  
Helga Ika Sudra
Keyword(s):  
Material Handling ◽  
Raw Materials ◽  
Layout Design ◽  
Raw Material ◽  
Storage Method ◽  
Handling Cost ◽  
Material Handling Cost ◽  
Method Class ◽  
Material Handling Costs ◽  
Initial Layout

Activities carried out in the warehouse include material handling. Generally, the costs involved in material handling activities are quite large. One method that can be used in managing the layout of raw material placement in raw material warehouses is the class based storage method. Class based storage is a policy that divides storage into three classes A, B and C based on Pareto law. Pareto law is the principle of putting items that have the greatest accessibility near the Input-Output point. The distance of material handling to the initial layout raw material warehouse is 3,513,337 meters / month and the material handling costs are Rp. 134,534,765 / month, because the initial layout of the raw material warehouse still uses random storage and the raw materials that are widely used are not placed close to the intake floor of the production, so that the distance to get raw materials for production needs is far. After the re-layout design was made based on the placement of raw materials in the class based storage method, the material handling transfer distance was reduced to 2,644,459 meters / month and the material handling cost for the repair raw material warehouse layout fell to Rp. 99,949,520 / month. In other words, there was a decrease in material handling distance by 25% and material handling costs by 26%.

scholarly journals Usulan Perbaikan Tata Letak Fasilitas Terhadap Optimalisasi Jarak dan Ongkos Material Handling Dengan Pendekatan Systematic layout planning (SLP) di PT Transplant Indonesia

2018 ◽  
Vol 2 (1) ◽  
pp. 45
Author(s):  
Dede Muslim ◽  
Anita Ilmaniati
Keyword(s):  
Material Flow ◽  
Material Handling ◽  
Layout Design ◽  
Flow Path ◽  
Material Transfer ◽  
Layout Planning ◽  
Handling Cost ◽  
Material Handling Cost ◽  
Systematic Layout Planning ◽  
The Cost

Abstract – Unplanned layout and inefficient material flow between work units can lead to increased cost. PT Transplan Indonesia's current material flow path is inefficient with material flow distance 115.5 meters and material handling cost that has not been taken into account. This study aims to find out how big the role of facility layout design in cutting the distance of material transfer and pressing the cost of material handling. The method used in this research is Systematic Layout Planning (SLP) approach, which is comparing the distance of material transfer between initial layout with proposed layout. The results of this study indicate that the distance of the material flow path on the production floor with proposed layout changed to 71,7 meters, with material handling cost per meter reduced from Rp. 1,105,954 to Rp. 712,402 or decrease as much as 35%. Based on the results of the research, the layout of the proposal is considered more effective and efficient because it can reduce the distance of material transfer and reduce the cost of material handling on the packing/shipping floor.Keywords: Layout Design; Material handling cost; Systematic Layout Planning (SLP)

scholarly journals Monarch Butterfly Optimization for Facility Layout Design Based on a Single Loop Material Handling Path

Mathematics ◽  
2019 ◽  
Vol 7 (2) ◽  
pp. 154 ◽  
Author(s):  
Minhee Kim ◽  
Junjae Chae
Keyword(s):  
Material Flow ◽  
Material Handling ◽  
Facility Layout ◽  
Monarch Butterfly ◽  
Layout Design ◽  
Monarch Butterfly Optimization ◽  
Single Loop ◽  
Handling Cost ◽  
Material Handling Cost ◽  
The Given

Facility layout problems (FLPs) are concerned with the non-overlapping arrangement of facilities. The objective of many FLP-based studies is to minimize the total material handling cost between facilities, which are considered as rectangular blocks of given space. However, it is important to integrate a layout design associated with continual material flow when the system uses circulating material handling equipment. The present study proposes approaches to solve the layout design and shortest single loop material handling path. Monarch butterfly optimization (MBO), a recently-announced meta-heuristic algorithm, is applied to determine the layout configuration. A loop construction method is proposed to construct a single loop material handling path for the given layout in every MBO iteration. A slicing tree structure (STS) is used to represent the layout configuration in solution form. A total of 11 instances are tested to evaluate the algorithm’s performance. The proposed approach generates solutions as intended within a reasonable amount of time.

Reprocessing Cell Layout Optimization Using Hybrid Ant Systems

2013 ◽  
pp. 171-185
Keyword(s):  
Experimental Study ◽  
Material Handling ◽  
Layout Design ◽  
Future Trends ◽  
Ant System ◽  
Research Directions ◽  
Handling Cost ◽  
Material Handling Cost ◽  
Ant Systems

This chapter describes the role of reprocessing cell layout design in reducing the material handling cost at the used product post-disassembly stage. The chapter begins with the discussion of material handling cost issues encountered at the reusable parts reprocessing phase. Then, related studies in the literature are discussed in the background section. Next, the focal problem of this chapter is stated in the problem statement section. A detailed description about the approach (i.e., the hybrid ant system) can be found in the proposed methodology section. Right after this, an illustrative numerical example and the corresponding comparison study are detailed in the experimental study section. The potential research directions regarding the main problem considered in this chapter are highlighted in the future trends section. Finally, the conclusion drawn in the last section closes this chapter.

scholarly journals Minimizing Material Handling Costs with the SLP Method and Material Transport Equipment in Steel Pipe Companies

2021 ◽  
Vol 4 (2) ◽  
pp. 10-16
Author(s):  
Nur Kalim ◽  
Lukmandono
Keyword(s):  
Material Handling ◽  
Cost Savings ◽  
Material Transport ◽  
Material Transfer ◽  
Transport Equipment ◽  
Handling Cost ◽  
Material Handling Cost ◽  
Systematic Layout Planning ◽  
Material Handling Costs ◽  
The Cost

Factors that influence the amount of material handling costs are the distance of material movement, methods, and tools (equipment) used. The distance of material movement is strongly influenced by the layout of the production facility. The new layout design using the SLP method is expected to reduce the distance of material or product movement in PT. A B C. From the analysis results obtained the total distance of material transfer at the initial layout of the production process at PT. ABC of 1761 meters / month with material handling costs of Rp. 315,390,000.00 / month. Then an analysis of the use of material transport equipment results in the replacement of a crane with a sloping plane to connect the production machine. So the cost of material handling using the inclined plane becomes Rp. 0. The use of sloping fields can only be used on certain production machines. By using the Systematic Layout Planning (SLP) method, there are 3 alternative layouts produced. The most optimal alternative layout is alternative layout 3 with monthly material handling cost savings of Rp. 68,100,000.00 or 21% of the initial material handling layout cost.

scholarly journals MATERIAL FLOW ANALYSIS AND PLANT LAY-OUT OPTIMIZATION OF A MANUFACTURING SYSTEM

2014 ◽  
pp. 107-116
Author(s):  
Francesco Longo ◽  
Giovanni Mirabelli ◽  
Enrico Papoff
Keyword(s):  
Material Flow ◽  
Material Handling ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Wood Products ◽  
New Production ◽  
Accurate Analysis ◽  
Handling Cost ◽  
Material Handling Cost ◽  
Time Minimization

The paper proposes the results of a research project developed by the authors in collaboration with a production system working in the field of manufacturing wood products. The first step of the project was an accurate analysis of the system and the design of new production documents in order to collect data about the system itself. The collected data have been used to propose an initial solution of plant lay-out. The second step of the project was the construction of a simulation model. The model has been used to find an optimal plant- layout configuration by means of genetic algorithms with the goal of material handling cost and shop order flow time minimization.

scholarly journals Analysis of Bread Production Facilities Layout using BLOCPLAN Algorithm

2021 ◽  
Vol 10 (2) ◽  
pp. 172-181
Author(s):  
Harry Imanullah ◽  
◽  
Hesty Heryani ◽  
Agung Nugroho ◽  
◽  
...  
Keyword(s):  
Material Handling ◽  
Production Capacity ◽  
Transfer Time ◽  
Material Transfer ◽  
Handling Cost ◽  
Material Handling Cost ◽  
Bread Production ◽  
The One ◽  
Initial Layout ◽  
Production Facilities

This study aims to obtain an optimal facility layout by considering the distance between the workstations, transfer time, and material handling cost in a bakery. The research was conducted at a medium-scale bread producer CV Mumtaz Bakery in Banjarbaru City, South Kalimantan. The initial layout of CV Mumtaz Bakery's production facilities is considered as not optimal for production capacity up to 500 kg per day. The layout analysis and the appearance of improvement alternatives were carried out using the BLOCPLAN algorithm, and then the design implementation was carried out using CorelDraw software. Determination of the best layout alternative is based on the highest R-Score. The results showed that the best layout was the one with an R-Score of 0.86. This selected workstation layout has a total distance between processing stations of 31.70 m, a total transfer time of 25 seconds, and a material handling cost of IDR 434.29 for each batch. This layout will reduce the total material transfer distance and the material transfer time from the initial layout by 14.67% and 10.7% respectively.

Production Lot Sizing with Material-Handling Cost Considerations

1982 ◽  
Vol 14 (1) ◽  
pp. 44-51 ◽  
Author(s):  
T. J. Hodgson ◽  
T. J. Lowe
Keyword(s):  
Material Handling ◽  
Lot Sizing ◽  
Handling Cost ◽  
Material Handling Cost
Sign in / Sign up

Export Citation Format

Share Document