Stabilometry as a method for assessing the effect of the orthodontic treatment on body posture in patients with distal occlusion

Author(s):  
N.M. Markov ◽  
◽  
V.V. Ivanov ◽  
E.K. Krechina ◽  
I.V. Pogabalo ◽  
...  
2021 ◽  
Vol 102 (1) ◽  
pp. 92-99
Author(s):  
F S Ayupova ◽  
R A Khotko ◽  
E L Vinichenko ◽  
V N Lovlin

Aim. To analyze the results of orthodontic treatment of a child with asymmetrical micrognathia and mandiblar condylar hyperplasia. Methods. The configuration of a face in the photos was evaluated and diagnostic models of the jaws were analyzed by using the Ponts and Korkhaus methods in treatment dynamics. The physiological status of bone tissue, temporomandibular joints and teeth was studied by using orthopantomography and computed tomography. Functional disorders were detected by using special tests, including EschlerBittner's test and Ilyina-Markosyans test. Orthodontic treatment and stimulation of mandibular growth in the mixed dentition stage were undertaken with the single jaw removable appliances and the appliance improved by us for correction of the distal occlusion. The Damon Q bracket system with archwires was used in permanent dentition period. Results. The child's convex facial profile was typical for distal occlusion and micrognathia. The facial asymmetry, increasing with mouth opening, and a decrease in mandibular range of motion indicated lesion of the right temporomandibular joint. The right condyle was enlarged on the orthopantomogram. The computed tomography showed that it was asymmetrically enlarged and had a cellular structure. There was detected asymmetric micrognathia. The comprehensive rehabilitation plan included orthodontic treatment, myotherapy, speech therapy, mechanotherapy. The use of removable orthodontic appliances led to the normal size of the dentition and their relation, significantly reduced functional disorders and improved facial aesthetics. Five years after completion of orthodontic treatment, the physiological occlusion and amplitude of the mandibular movements remained, but the right mandibular angle was flattened. Conclusion. The comprehensive rehabilitation of a child with asymmetrical micrognathia and mandibular condylar hyperplasia started in mixed dentition stage provided conditions for the formation of normal permanent dentition and the improvement of functional disorders and facial aesthetics; our results allow us to suggest the positive effect of our tactics for treatment of the patient.


2021 ◽  
Vol 17 (1) ◽  
Author(s):  
Isa Klostermann ◽  
Christian Kirschneck ◽  
Carsten Lippold ◽  
Sachin Chhatwani

Abstract Background The purpose of this study was to analyze the relationship between body posture and sagittal dental overjet in children before and after early orthodontic treatment with removable functional orthodontic appliances. Methods Angle Class II patients (mean age 8.2 ± 1.2 years; 29 males and 25 females) with a distinctly enlarged overjet (> 9 mm) were retrospectively examined regarding body posture parameters before and after early orthodontic treatment. In addition, changes in overjet were investigated with the aid of plaster models. Forms of transverse dysgnathism (crossbite, lateral malocclusions) and open bite cases were excluded. Body posture parameters kyphosis, lordosis, surface rotation, pelvic tilt, pelvic torsion and trunk imbalance were analyzed by means of rasterstereographical photogrammetry to determine, if the orthodontic overjet correction is associated with specific changes in posture patterns. Results In nearly all patients an overjet correction and an improvement regarding all body posture and back parameters could be noted after early orthodontic treatment. Overjet reduction (− 3.9 mm ± 2.1 mm) and pelvic torsion (− 1.28° ± 0,44°) were significantly (p < 0.05) and moderately correlated (R = 0.338) with no significant associations found for the other posture and back parameters (p > 0.05). Conclusion Overjet reduction during early orthodontic treatment may be associated with a detectable effect on pelvic torsion.


2019 ◽  
Vol 15 (3) ◽  
pp. 103-109
Author(s):  
Ольга Меграбян ◽  
Olga Megrabyan ◽  
Павел Ишмурзин ◽  
Pavel Ishmurzin

Importance. The choice of management and orthodontic appliance construction is fundamental in planning and treatment of patients with mandibular micrognathia and/ or retrognathism. The aim ― is evaluation of treatment effectiveness of patients with mandibular micrognathia and/ or retrognathism in incompleted facial skeleton growth period. Methodoloty. Base of the research was Children dentistry and orthodontics department of E.A. Vagner Perm State Medical University. The object of the research is 98 patients aged from 5,5 to 16 (42 girls and 56 boys) with distal occlusion and mandibular micrognathia and/ or retrognathism. Data for study were lateral cephalograms, profile images, clinical study results before and after orthodontic treatment. Results. It was determined that the largest increase in mandible size and its position normalization is observed in the treatment of patients with CS2, CS3 cervical vertebral maturation stages. In patients with CS5 cervical vertebral maturation stage and overjet more than 6 mm we use a symptomatic treatment principle for distal occlusion correction. Results application area ― orthodontists practice. Conclusions. This data may be used in prognosis of orthodontic treatment outcome and retentional period in patients with distal occlusion.


2021 ◽  
Vol 2021 ◽  
pp. 1-5
Author(s):  
Arkan Muslim Al Azzawi ◽  
Hasan Sabah Hasan ◽  
Mohammed Nahidh ◽  
Mohamed Elkolaly ◽  
Ayshan Kolemen

This study aimed to clarify the effect of large hair clips on patient head posture on the dental chair headrest and its harmful impact on orthodontist body posture and neck-back pain. One hundred orthodontists voluntarily participated in a web-based questionnaire designed and distributed online by using the Google form posted in the Telegram group of Iraqi orthodontists to assess the opinions of orthodontists regarding the effect of a large hair clip on the patient’s position on the dental chair and site of pain perception during different stages of orthodontic treatment. Ninety percent of the orthodontists get bothered by the large hair clip. About 92% of the responses preferred their patients to remove the large hair clip; 99% of them responded that the large hair clip does affect the position of the patient’s head on the chair’s headrest. Eighty-nine percent responded that a large hair clip could disturb the operator during taking intraoral photographs, and 64% disturbed while taking dental impressions. Orthodontists reported that 4% had “back pain,” 28% had “neck pain,” and 60% had both “back and neck pain” during bonding appointment, while only 8% reported “no pain.” Regarding the activation appointments, 4% had “back pain,” 26% had “neck pain,” and 48% had both, while only 22% reported “no pain.” During the debonding appointments, 7% of the respondents had “back pain,” 29% had “neck pain,” and 44% had both “back and neck pain,” yet 20% stated absence of pain. Wearing a hair clip and changing patient position on dental chair and orthodontist posture during different stages of orthodontic work such as bonding, regular recall, and depending on the procedure may be directly related to the neck-back pain perception to an orthodontist.


2021 ◽  
pp. 76-82
Author(s):  
S.І. Doroshenko ◽  
I.S. Kuzmenko ◽  
K.V. Storozhenko ◽  
S.V. Irkha ◽  
Kh.M. Demianchuk

No tooth is as problematic for patients as it is for third molars. After erupting later than all teeth, they often have little space in the dentition, or rather in the retromolar space, which should appear, above all, with further growth of the jaws. Therefore, the timing of their eruption varies considerably and is often accompanied by the appearance of significant morphological and functional disorders. That is why it is necessary to take a balanced approach to the preservation of third molars in the dental arch, providing them with a place in the retromolar space by timely detecting their condition and position in the jawbones and thus preserving the integrity of the dentition and implementing the fourth and last stage of bite raising in orthodontic patients with dental anomalies. The purpose of the study. To substantiate a differentiated approach to the preservation of third molars in orthodontic treatment by determining their condition and position in the jaw. Material and methods of research. For this purpose, 44 patients aged 15-30 years with different dentofacial anomalies having full permanent dentition including third molars confirmed by clinical and X-ray data were examined and given orthodontic treatment. Additional methods of the study included analysis of diagnostic model measurements (by Pont Korkhaus method). Furthermore, retromolar space was measured to find out if there is a space for third molars in the row of teeth by measuring its length and height using a silicone index (by S.I. Doroshenko and Ye.A. Kulhinskyi's method, 2009). X-ray studies included analysis of orthopantomograms (OPG), teleradiography (TRG), computed tomography (CT) scan, etc. The OPG analysis was conducted using K.V. Storozhenko's method (2013) which involved measuring the inclination of teeth, especially third and second molars relative to the jaw base. OPG showed a lack of space for third molars using S.I. Doroshenko and Ye.A. Kulhinskyi's method (2009). Measurement data were processed using mathematical statistics. The mean and the confidence interval for the data sample were calculated according to GOST R 8.736 – 2011. Results. The analysis of data showed significant variability in inclination of third molars relative to the jaw base and second molars on both sides of the jaws (on the left and the right). The largest difference in inclinations of third and second molars was observed in the lower jaw (LJ) both on the left and the right, with an insignificant deviation of 0.3° ± 0.2°, and the least difference was in the upper jaw (UJ), especially on the left, but with a larger deviation of 3.6° ± 0.2°. The conducted studies suggested that the larger the difference in inclinations of third lower molars relative to second ones is, the more problematic their eruption is, since they erupt later. Lower third molars incline medially at their crowns and therefore they have a smaller angle of inclination relative to the LJ base. While erupting upper third molars incline distally at their crown with an increased angle of inclination relative to the UJ base. In 44 patients aged 15-30 years, 106 (60.2%) third molars were in retention, including 35 (33.1%) teeth in physiological retention in younger people, 40 (37,7%) teeth in half-retention, and 31 (29.2%) third molars in constant retention. An important factor in predicting the eruption of third molars became the presence of space for them in retromolar space, both sagittally and vertically. The presence of space in the row of teeth, i. e. sagittally, was observed in 25 (14.2%) of 176 third molars: in LJ in 15 (8.5%) molars, especially on the left in 7 (4.0%), and on the right in 8 (4.5%) teeth; in UJ in 10 (5.7%) teeth – 6 (3.4%) and 4 (2.3%) respectively. The presence of space for the third molars also depended on width at the equator, which appeared to be the smallest in UJ and varied from 10 mm to 15 mm with a mean of 11.7 mm, and the largest in LJ – from 12 mm to 19 mm, the mean was 14.17 mm. Differences in the means between left and right UJ third molars were not detected (11.8 mm and 11.8 mm respectively), and in LJ it was insignificant (14.2 mm and 14.1 mm). In individual cases, the difference was 2.0-4.0 mm, and 1.0 mm in LJ. The latter confirms some scientists’ conclusions that the sizes of upper third molars vary more widely. Retention of third molars in the subjects was associated with different dentofacial anomalies most commonly reported in 17 (38.6%) patients with distal occlusion (class ІІ) and in 13 (29.5%) persons with deep occlusion, and more rarely seen with medial (class ІІІ) – 4 (9.1%) – and open occlusion – 4 (9.1%). Clinical studies suggested that when selecting a tactic for treatment of retained teeth, apart from determining their position in jawbones and the presence of a sagittal space in the row of teeth, it is also necessary to determine the size of vertical retromolar space for them which was measured using silicone indexes. Persons with deep and distal occlusion had the narrowest alveolar space from 0.5 mm to 4 mm, while in those with neutral occlusion it was from 5 mm to 7 mm. Thus, the conducted studies showed the importance of the differentiated approach to the preservation of third molars, especially during orthodontic treatment.


2020 ◽  
Vol 16 (2) ◽  
pp. 33-39
Author(s):  
P.S. Flis ◽  
M.A. Omelchuk ◽  
N.V. Rashchenko ◽  
A.V. Tsyzh

Relevance. Distal occlusion is accompanied by certain morphological, functional, and aesthetic changes, in which there are disorders of external respiration, speech disorders, dysfunction of chewing, and swallowing. Today the problem of treatment of occlusion anomalies is not completely solved. The presence of errors and complications in the treatment of distal occlusion, the presence of recurrence of the disease in the form of a double occlusion, which necessitates repeated, and often unsuccessful treatment, indicates that the problem is still far from its final solution. Objective: to investigate the effectiveness of the use of orthodontic activators for the treatment of distal occlusion and retention devices to maintain the results of treatment. Materials and methods. 126 children aged 9-12 years with distal occlusion are divided into 2 groups. Group I (n=63) – children with distal occlusion and physiological type of respiration; Group II (n=63) – children with distal occlusion and pathological (oral) type of breathing. Conducted clinical, myographic, and anthropometric studies. All patients were treated by wearing a removable functional two-jaw orthodontic activator for at least 16 hours a day, with mandatory use during sleep, for 6 months. In addition to this hardware method of treatment, preventive measures were prescribed: myogymnastic and breathing exercises. The correction of the orthodontic activator was performed once a month. A control electromyographic study to determine the effectiveness of treatment was performed 3 months after the start of treatment (selectively, in some patients - also in the sixth month of treatment). Nylon floss, to keep the teeth in the achieved position. Results. The study of the designs of retention devices and comparison of their effectiveness showed that after active orthodontic treatment the most effective retention can be achieved by using a retainer made of flex wire and nylon thread impregnated with liquid photopolymer. The most optimal way to fix the fixed retention apparatus was as follows: complete completion of the active period of treatment; control of fissure-tubercle contact; professional teeth cleaning; conducting X-ray control to identify the position of the roots of the teeth; production of gypsum models and their fixation in the occluder; detection of contact points of the frontal group of teeth; detection of the location of the retainer in the oral cavity; making a retainer indirectly; fixation of the retention apparatus in the oral cavity. Our proposed method of manufacturing and fixing non-removable retainers with the use of nylon thread allows us to achieve reliable long-term retention of the achieved positive results after active orthodontic treatment. Analysis of the study data of children aged 9-12 years with distal occlusion and pathological (oral) type of respiration compared with the control group showed an increase in all measured EMG parameters for the temporalis muscles (in the range of 16-31.1±3.12%) and reduction - for the actual masticatory and circular muscles of the mouth (in the range of 17.0-29.8±3.09% and 16.8-35.9%, respectively). The total deviation of the values of the obtained indicators from the normative ranges from 16.0 to 35.9 ±2.56%. These abnormalities can be seen as a manifestation of the formation of a pathological muscle reaction, accompanied by negative changes in the appearance of the patient. The design of a removable functionally acting two maxillary orthodontic activators for simultaneous treatment of distal occlusion and dysfunction of masticatory and facial muscles in children with physiological and pathological types of respiration has been developed. It consists of a monoblock and a vestibular plate, monolithically connected to each other. Conclusions. In patients with distal occlusion, treatment with a removable functional two-jaw orthodontic activator helps to restore myodynamic balance in the dental system, resulting in improved patient facial expression, self-esteem, and quality of life. Wearing non-removable retainers with the use of nylon thread allows us to achieve reliable long-term retention of the achieved positive results after active orthodontic treatment.


2013 ◽  
Vol 9 (4) ◽  
pp. 64-66 ◽  
Author(s):  
П. Ишмурзин ◽  
P. Ishmurzin ◽  
М. Пономарева ◽  
M. Ponomareva ◽  
А. Лисовенко ◽  
...  

<p>The article shows еру analysis of skeletal and dental modifications in 30 patients in period of complete growth of maxillofacial complex. All patients underwent orthodontic treatment for combined form of distal occlusion and deep bite by II class mechanics (including II class intermaxillary elastics). We’ve also detected proportional relationship between increase in occlusion plane inclination and mandibular plane inclination. Extrusion of first permanent molars is absolute and it initiates mandibular clockwise rotation.</p>


Author(s):  
F. S. Ayupova ◽  
R. A. Khotko

Relevance. According to the latest data the distal occlusion of the dentition is considered first in the structure of dental anomalies on the sagittal plane reaching 40-45% of the total number of deformations of the dental system.Purpose. Study of information about management and methods of treatment and intended indications for their use in patients with distal occlusion in different periods of bite formation.Materials and methods. We studied the publications of recent years by both Russian and foreign authors which were devoted to the choice of management and methods of treatment of growing patients with distal occlusion.Results. The variability in the manifestations of distal occlusion indicates the urgency of improving the management and methods of orthodontic treatment in patients with this pathology. In this case the determining factors are the severity of the pathology and the age of the patient. It is considered that the potential growth of the dento-maxillofacial area of the patient should be determined according to its individual characteristics. They are based on the stage of formation of the cervical vertebrae. It is noted that treatment during the second dentition has significant effects which are associated with the possibility of modifying the growth of the dental complex. This allows you to achieve a stable result in the long term.Conclusions. Different opinions of specialists determine the relevance of further study of methods of orthodontic treatment and analysis of the efficiency of their application, the necessity to improve the tactics of comprehensive rehabilitation of patients with distal occlusion during the formation of the bite taking into account the direction of the type of growth of the facial skeleton in growing patients.


2019 ◽  
Vol 19 (1-2) ◽  
pp. 115-121
Author(s):  
A. A Dikova

Distal occlusion is a widespread dental anomaly among all dental diseases. Protrusion of the upper jaw incisors during distal occlusion is quite common. Orthodontic treatment is characterized by its high duration. In this regard, the issue of creating methods to reduce the time of orthodontic treatment of patients with distal occlusion Class II Engle subclass 1 and improve the quality of life of the patient is relevant. When treating patients with distal occlusion, it is necessary to create conditions for the distalization of the second molars of the upper jaw; therefore, it becomes necessary to use additional equipment at the initial stages of the active period of orthodontic treatment. The devices developed by the author allow the body to distalize the second molar of the upper jaw and stabilize its position in the process of orthodontic treatment.


Sign in / Sign up

Export Citation Format

Share Document