Circularly Polarized Rectangular Microstrip Patch Antenna with Finite Ground Plane

2015 ◽  
Vol 4 (2) ◽  
pp. 74
Author(s):  
Sanyog Rawat ◽  
Kamlesh Kumar Sharma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Rectangular Patch

<p class="Abstract"><span style="font-weight: normal;">In this paper a new geometry of patch antenna is proposed with improved bandwidth and circular polarization. The radiation performance of circularly polarized rectangular patch antenna is investigated by applying IE3D simulation software and its performance is compared with that of conventional rectangular patch antenna.</span> <span style="font-weight: normal;">Finite Ground truncation technique is used to obtain the desired results. The simulated return loss, axial ratio and smith chart with frequency for the proposed antenna is reported in this paper. It is shown that by selecting suitable ground-plane dimensions, air gap and location of the slits, the impedance bandwidth can be enhanced upto 10.15 % as compared to conventional rectangular patch (4.24%) with an axial ratio bandwidth of 4.05%.</span></p><p> </p><p> </p>

scholarly journals Circularly Polarized Slotted Microstrip Patch Antenna with Finite Ground Plane

2012 ◽  
Vol 1 (2) ◽  
pp. 97-106
Author(s):  
Sanyog Rawat ◽  
K K Sharma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Rectangular Patch

In this paper a new geometry of circularly polarized patch antenna is proposed with improved bandwidth. The radiation performance of proposed patch antenna is investigated using IE3D simulation software and its performance is compared with that of conventional rectangular patch antenna. The simulated return loss, axial ratio and impedance with frequency for the proposed antenna are reported in this paper. It is shown that by selecting suitable ground-plane dimensions, air gap and location of the slots, the impedance bandwidth can be enhanced upto 10.15% as compared to conventional rectangular patch (4.24%) with an axial ratio bandwidth of 4.05%.DOI: 10.18495/comengapp.12.097106

scholarly journals Performance Comparison of Swastika and Rectangular Shaped Microstrip Patch Antenna

2018 ◽  
Vol 1 (1) ◽  
pp. 11-14
Author(s):  
Suroj Burlakoti ◽  
Prakash Rai
Keyword(s):  
Radiation Pattern ◽  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Performance Comparison ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Patch Antennas ◽  
Microstrip Patch Antennas ◽  
Microstrip Patch

In this paper, Microstrip patch antennas with rectangular and swastika shape of patch are designed and its performance parameters are compared with each other. Rectangular and Swastika shaped patch are considered in this paper with common rectangular ground plane. The antenna is simulated at 2.4 GHz using HFSS simulation software. This work mainly includes modification of antenna patch to improve the antenna parameters. The parameters of antenna such as Return loss, VSWR Bandwidth and radiation pattern are compared using simulation. The performance of Swastika shaped antenna was found to be better than rectangular shaped microstrip patch antenna with improved Return Loss, VSWR, Bandwidth and Radiation Pattern.

scholarly journals Miniaturized Circularly Polarized Implantable Antenna for ISM-Band Biomedical Devices

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Ke Zhang ◽  
Changrong Liu ◽  
Xueguan Liu ◽  
Huiping Guo ◽  
Xinmi Yang
Keyword(s):  
Patch Antenna ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Optimized Design ◽  
Circularly Polarized ◽  
Ism Band ◽  
Microstrip Patch ◽  
Compact Size ◽  
Implantable Antenna

A compact circularly polarized antenna operating at 915 MHz industrial, scientific, and medical (ISM) band for biomedical implantable applications is presented and experimentally measured. The proposed antenna can be miniaturized to a large extent with the compact size of 15 × 15 × 1.27 mm3 by means of loading patches to a ring-shaped microstrip patch antenna. An impedance bandwidth of 10.6% (865–962 MHz) for reflection coefficient less than −10 dB can be obtained. Meanwhile, the simulated 3 dB axial-ratio (AR) bandwidth reaches 14 MHz. Finally, the optimized design was fabricated and tested, and the measured results agree well with simulated results.

scholarly journals Metamaterial Loaded Rectangular Patch Antenna for Wireless Communication Application

2021 ◽  
Vol 9 (3) ◽  
pp. 193-197
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Negative Permittivity ◽  
Electromagnetic Analysis ◽  
Analysis Tool ◽  
Network Analyzer ◽  
Microstrip Patch ◽  
Rectangular Patch

In this paper, a metamaterial based compact multiband rectangular microstrip patch antenna is proposed. The return loss of metamaterial loaded microstrip patch antenna obtained at the resonant frequency 2.4GHz. The metamaterial structure printed on FR4 substrate at hight of 1.6mm from the ground plane. The FR4 substrate has 4.4 dielectric constant.These metamterial structures are periodic in nature and possesses negative permittivity and negative permeability. The greatest advantage of metamaterial loading will be miniaturization. This metamterial loaded rectangular patch antenna is simulated and tested using HFSS Simulator, where an electromagnetic analysis tool is used. The fabricated antennas results are measured using Vector Network Analyzer (VNA).

Bandwidth enhancement of a planar monopole microstrip patch antenna

2014 ◽  
Vol 8 (2) ◽  
pp. 237-242 ◽  
Author(s):  
Sudeep Baudha ◽  
Dinesh Kumar Vishwakarma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Communication Services ◽  
Bandwidth Enhancement ◽  
Microstrip Patch ◽  
Peak Gain ◽  
Good Agreement

This paper presents a simple broadband planar monopole microstrip patch antenna with curved slot and partial ground plane. The proposed antenna is designed and fabricated on commercially available FR4 material with εr = 4.3 and 0.025 loss tangent. Bandwidth enhancement has been achieved by introducing a curved slot in the patch and optimizing the gap between the patch and the partial ground plane and the gap between the curved slot and the edge of the patch. Simulated peak gain of the proposed antenna is 4.8 dB. The impedance bandwidth (defined by 10 dB return loss) of the proposed antenna is 109% (2–6.8 GHz), which shows bandwidth enhancement of 26% as compared with simple monopole antenna. The antenna is useful for 2.4/5.2/5.8-GHz WLAN bands, 2.5/3.5/5.5-GHz WiMAX bands, and other wireless communication services. Measured results show good agreement with the simulated results. The proposed antenna details are described and measured/simulated results are elaborated.

scholarly journals A Study on Dual-band Microstrip Rectangular Patch Antenna for Wi-Fi

2020 ◽  
Vol 16 ◽  
pp. 01-12
Author(s):  
Rabnawaz Sarmad Uqaili ◽  
Junaid Ahmed Uqaili ◽  
Sidrish Zahra ◽  
Faraz Bashir Soomro ◽  
Ali Akbar
Keyword(s):  
Dielectric Constant ◽  
Patch Antenna ◽  
Patch Size ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
802.11 Wlan

This paper presents the design of a dual-band microstrip patch antenna for Wi-Fi that operates at 2.5 GHz and 5.8 GHz. The antenna contains a rectangular patch with two rectangular slots. The first slot is incorporated in the patch while the second slot is incorporated in the ground plane. The antenna is based on a microstrip fed rectangular patch printed on the FR-4 epoxy substrate with a dielectric constant of 4.4 and a thickness of 1.6 mm with patch size 24 mm × 21 mm. The simulated result shows that the realized antenna successfully works on dual-band and subsequently achieves a bandwidth of 100 MHz and 200 MHz as well as the return loss about -29.9 dB and -15.16 dB for 2.5 GHz and 5.8 GHz respectively. A stable omnidirectional radiation pattern is observed in the operating frequency bands. The antenna meets the required specifications for 802.11 WLAN standards.

scholarly journals E SHAPE MICROSTRIP PATCH ANTENNA WITH RECTANGULAR AND CIRCULAR SLOT

2020 ◽  
Vol 5 (2) ◽  
pp. 188-193 ◽  
Author(s):  
Priyanka Jain ◽  
Raghavendra Sharma ◽  
Vandana Vikas Thakre
Keyword(s):  
Loss Tangent ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Antenna Design ◽  
Microstrip Patch ◽  
Rectangular Patch

In this proposed design a Rectangular E shaped micro-strip patch antenna is present with rectangular and circular slot within the Rectangular patch which operate at frequency 2.4 GHz. By proposed antenna design and coaxial feeding at suitable place  the resultant return loss, VSWR and bandwidth will be find out. For the propose microstrip antenna we have use FR-4 substrate which contain permittivity of 4.4 and thickness 1.5, loss tangent is 0.02. HFSS simulation software is used for designing and analysis.

scholarly journals Design of Microstrip Patch Antenna with DGS for GSM application

2019 ◽  
Vol 7 (1) ◽  
pp. 01-03
Author(s):  
Srashti Sharma ◽  
Vandana Vikas Thakare
Keyword(s):  
Radiation Pattern ◽  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Microstrip Patch ◽  
Circular Rings

In the present paper a micro strip patch antenna with DGS for GSM application is designed and simulated at 1.8 GHz frequency. DGS is applied in the shape of circular rings on the ground plane. Without DGS the return loss is -12 dB, which is further improved to -22dB by applying DGS. The simulated results such as impedance, bandwidth, directivity, gain and radiation pattern are analyzed and compared for with and without DGS.

scholarly journals A High Gain & Wide Band Rectangular Microstrip Patch Antenna loaded with �Interconnected SRR� Metamaterial Structure

2012 ◽  
Vol 1 (4) ◽  
pp. 335 ◽  
Author(s):  
Pramod Singhal ◽  
Bimal Garg
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Wide Band ◽  
Microstrip Patch Antenna ◽  
Total Efficiency ◽  
Metamaterial Structure ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
Rectangular Microstrip Patch Antenna

Communication applications require wide band and highly directive planner antennas. For such requirement this work deals with the analysis and simulation of a rectangular microstrip patch antenna loaded with INTERCONNECTED SRR metamaterial structure at a height of 3.2mm from the ground plane. The work also investigates the potential properties of the proposed metamaterial structure. The proposed Antenna is designed at a operating frequency of 2.75GHz to meet S-Band (2-4GHz) applications. By loading Interconnected SRR metamaterial structure with the rectangular patch antenna at a height of 3.2mm, the antennas bandwidth is found to be increased up to 378MHz and return loss is reduced to -42.2dB i.e. the potential properties like return loss, bandwidth, directivity and total efficiency of the proposed antenna increases to a great extent in comparison to the rectangular patch antenna alone. Double Negative properties of metamaterial have been proved by Nicolson-Ross-weir (NRW) method.

scholarly journals Design of Rectangular Microstrip Patch Antenna Incorporated with Innovative Metamaterial Structure for Dual band operation and Amelioration in Patch Antenna Parameters with Negative � and ?

2012 ◽  
Vol 1 (3) ◽  
pp. 205 ◽  
Author(s):  
Bimal Garg ◽  
Rahul Dev Verma ◽  
Ankit Samadhiya
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Metamaterial Structure ◽  
Microstrip Patch ◽  
Simulation Purpose ◽  
Rectangular Microstrip Patch Antenna

In this work a dual band rectangular microstrip patch antenna along with the innovative metamaterial structure is proposed at a height of 3.2mm from the ground plane, which consists of a rectangular geometry incorporated with c shaped structure. This work is mainly focused on increasing the potential parameters of microstrip patch antennas and analyzing the dual band operation of proposed antenna. The proposed antenna is designed to resonate at 2.478GHz and 2.919GHz frequency. The impedance bandwidth of the patch antenna along with the proposed metamaterial structure at 2.478GHz is improved by 20.4MHz and return loss is reduced by 20.128dB. At 2.919GHz the impedance bandwidth is improved by 25.4MHz and return loss is reduced by 19.564dB. For verifying that the proposed metamaterial structure possesses Negative values of Permeability and Permittivity within the operating frequency ranges, Nicolson-Ross-Weir method (NRW) has been employed. For simulation purpose CST-MWS Software has been used.

Sign in / Sign up

Export Citation Format

Share Document