scholarly journals Performance Analysis of Data Compression Algorithms for Energy Efficient Wireless Sensor Networks

Wireless Sensor Networks (WSN), is an intensive area of research which is often used for monitoring, sensing and tracking various environmental conditions. It consists of a number of sensor nodes that are powered with fixed low powered batteries. These batteries cannot be changed often as most of the WSN will be in remote areas. Life time of WSN mainly depends on the energy consumed by the sensor nodes. In order to prolong the networks life time, the energy consumption has to be reduced. Different energy saving schemes has been proposed over the years. Data compression is one among the proposed schemes that can scale down the amount of data transferred between nodes and results in energy saving. In this paper, an attempt is made to analyze the performances of three different data compression algorithms viz. Light Weight Temporal Compression (LTC), Piecewise Linear Approximation with Minimum Number of Line Segments (PLAMLIS) and Univariate Least Absolute Selection and Shrinkage Operator (ULASSO). These algorithms are tested on standard univariate datasets and evaluated using assessment metrics like Mean Square Error (MSE), compression ratio and energy consumption. The results show that the ULASSO algorithm outperforms other algorithms in all three metrics and contributes more towards energy consumption

2018 ◽  
Vol 14 (5) ◽  
pp. 155014771877692
Author(s):  
Shaoqiang Liu ◽  
Yanfang Liu ◽  
Xiang Chen ◽  
Xiaoping Fan

Data communication incurs the highest energy cost in wireless sensor networks, and restricts the application of wireless sensor networks. Data compression is a promising technique that can reduce the amount of data exchanged between nodes and results in energy saving. However, there is a lack of effective methods to evaluate the efficiency of data compression algorithms and to increase nodes’ energy efficiency. The energy saving of nodes is related to both hardware and software, this article proposes a new scheme for evaluating energy efficiency of data compression in wireless sensor networks according to the node’s hardware and software. The relationship between the energy efficiency and the hardware and software factors is expressed by a formula. In this formula, energy efficiency can be improved by increasing the compression ratio and decreasing the ratio of s/ k, in which k represents the node’s hardware factor related to energy consumption of processor, wireless module, and so on and s represents the software factor that reflects the energy consumption of the algorithm. Based on the scheme, a mechanism is proposed to improve the node’s energy efficiency by selecting effective algorithms in accordance with the node’s radio frequency power. The feasibility of the scheme is demonstrated with lossless data compression algorithms on the MSP430F2618 processor.


Author(s):  
Wajeeha Aslam ◽  
Muazzam A. Khan ◽  
M. Usman Akram ◽  
Nazar Abbas Saqib ◽  
Seungmin Rho

Wireless sensor networks are greatly habituated in widespread applications but still yet step behind human intelligence and vision. The main reason is constraints of processing, energy consumptions and communication of image data over the sensor nodes. Wireless sensor network is a cooperative network of nodes called motes. Image compression and transmission over a wide ranged sensor network is an emerging challenge with respect to battery, life time constraints. It reduces communication latency and makes sensor network efficient with respect to energy consumption. In this paper we will have an analysis and comparative look on different image compression techniques in order to reduce computational load, memory requirements and enhance coding speed and image quality. Along with compression, different transmission methods will be discussed and analyzed with respect to energy consumption for better performance in wireless sensor networks.


2017 ◽  
Vol 13 (1) ◽  
pp. 155014771668968 ◽  
Author(s):  
Sunyong Kim ◽  
Chiwoo Cho ◽  
Kyung-Joon Park ◽  
Hyuk Lim

In wireless sensor networks powered by battery-limited energy harvesting, sensor nodes that have relatively more energy can help other sensor nodes reduce their energy consumption by compressing the sensing data packets in order to consequently extend the network lifetime. In this article, we consider a data compression technique that can shorten the data packet itself to reduce the energies consumed for packet transmission and reception and to eventually increase the entire network lifetime. First, we present an energy consumption model, in which the energy consumption at each sensor node is derived. We then propose a data compression algorithm that determines the compression level at each sensor node to decrease the total energy consumption depending on the average energy level of neighboring sensor nodes while maximizing the lifetime of multihop wireless sensor networks with energy harvesting. Numerical simulations show that the proposed algorithm achieves a reduced average energy consumption while extending the entire network lifetime.


Author(s):  
Femi A. Aderohunmu ◽  
Jeremiah D. Deng ◽  
Martin Purvis

While wireless sensor networks (WSN) are increasingly equipped to handle more complex functions, in-network processing still requires the battery-powered sensors to judiciously use their constrained energy so as to prolong the elective network life time. There are a few protocols using sensor clusters to coordinate the energy consumption in a WSN, but how to deal with energy heterogeneity remains a research question. The authors propose a modified clustering algorithm with a three-tier energy setting, where energy consumption among sensor nodes is adaptive to their energy levels. A theoretical analysis shows that the proposed modifications result in an extended network stability period. Simulation has been conducted to evaluate the new clustering algorithm against some existing algorithms under different energy heterogeneity settings, and favourable results are obtained especially when the energy levels are significantly imbalanced.


Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4273 ◽  
Author(s):  
Jianlin Liu ◽  
Fenxiong Chen ◽  
Dianhong Wang

Data compression is very important in wireless sensor networks (WSNs) with the limited energy of sensor nodes. Data communication results in energy consumption most of the time; the lifetime of sensor nodes is usually prolonged by reducing data transmission and reception. In this paper, we propose a new Stacked RBM Auto-Encoder (Stacked RBM-AE) model to compress sensing data, which is composed of a encode layer and a decode layer. In the encode layer, the sensing data is compressed; and in the decode layer, the sensing data is reconstructed. The encode layer and the decode layer are composed of four standard Restricted Boltzmann Machines (RBMs). We also provide an energy optimization method that can further reduce the energy consumption of the model storage and calculation by pruning the parameters of the model. We test the performance of the model by using the environment data collected by Intel Lab. When the compression ratio of the model is 10, the average Percentage RMS Difference value is 10.04%, and the average temperature reconstruction error value is 0.2815 °C. The node communication energy consumption in WSNs can be reduced by 90%. Compared with the traditional method, the proposed model has better compression efficiency and reconstruction accuracy under the same compression ratio. Our experiment results show that the new neural network model can not only apply to data compression for WSNs, but also have high compression efficiency and good transfer learning ability.


2021 ◽  
Vol 10 (6) ◽  
pp. 3353-3360
Author(s):  
Aso Ahmed Majeed ◽  
Baban Ahmed Mahmood ◽  
Ahmed Chalak Shakir

The research domain for wireless sensor networks (WSN) has been extensively conducted due to innovative technologies and research directions that have come up addressing the usability of WSN under various schemes. This domain permits dependable tracking of a diversity of environments for both military and civil applications. The key management mechanism is a primary protocol for keeping the privacy and confidentiality of the data transmitted among different sensor nodes in WSNs. Since node's size is small; they are intrinsically limited by inadequate resources such as battery life-time and memory capacity. The proposed secure and energy saving protocol (SESP) for wireless sensor networks) has a significant impact on the overall network life-time and energy dissipation. To encrypt sent messsages, the SESP uses the public-key cryptography’s concept. It depends on sensor nodes' identities (IDs) to prevent the messages repeated; making security goals- authentication, confidentiality, integrity, availability, and freshness to be achieved. Finally, simulation results show that the proposed approach produced better energy consumption and network life-time compared to LEACH protocol; sensors are dead after 900 rounds in the proposed SESP protocol. While, in the low-energy adaptive clustering hierarchy (LEACH) scheme, the sensors are dead after 750 rounds.


2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Subramaniam Sumithra ◽  
T. Aruldoss Albert Victoire

Due to large dimension of clusters and increasing size of sensor nodes, finding the optimal route and cluster for large wireless sensor networks (WSN) seems to be highly complex and cumbersome. This paper proposes a new method to determine a reasonably better solution of the clustering and routing problem with the highest concern of efficient energy consumption of the sensor nodes for extending network life time. The proposed method is based on the Differential Evolution (DE) algorithm with an improvised search operator called Diversified Vicinity Procedure (DVP), which models a trade-off between energy consumption of the cluster heads and delay in forwarding the data packets. The obtained route using the proposed method from all the gateways to the base station is comparatively lesser in overall distance with less number of data forwards. Extensive numerical experiments demonstrate the superiority of the proposed method in managing energy consumption of the WSN and the results are compared with the other algorithms reported in the literature.


Author(s):  
Femi A. Aderohunmu ◽  
Jeremiah D. Deng ◽  
Martin Purvis

While wireless sensor networks (WSN) are increasingly equipped to handle more complex functions, in-network processing still requires the battery-powered sensors to judiciously use their constrained energy so as to prolong the elective network life time. There are a few protocols using sensor clusters to coordinate the energy consumption in a WSN, but how to deal with energy heterogeneity remains a research question. The authors propose a modified clustering algorithm with a three-tier energy setting, where energy consumption among sensor nodes is adaptive to their energy levels. A theoretical analysis shows that the proposed modifications result in an extended network stability period. Simulation has been conducted to evaluate the new clustering algorithm against some existing algorithms under different energy heterogeneity settings, and favourable results are obtained especially when the energy levels are significantly imbalanced.


Sensors ◽  
2019 ◽  
Vol 19 (23) ◽  
pp. 5265 ◽  
Author(s):  
Huang ◽  
Sun ◽  
Yang

Underwater wireless sensor networks (UWSNs) have become a popular research topic due to the challenges of underwater communication. The existing mechanisms for collecting data from UWSNs focus on reducing the data redundancy and communication energy consumption, while ignoring the problem of energy-saving transmission after compression. In order to improve the efficiency of data collection, we propose a data uploading decision-making strategy based on the high similarity of the collected data and the energy consumption of the high similarity data compression. This decision-making strategy efficiently optimizes the energy consumption of the networks. By analyzing the data similarity, the quality of network communication, and uploading energy consumption, the decision-making strategy provides an energy-efficient data upload strategy for underwater nodes, which reduces the energy consumption in various network settings. The simulation results show that compared with several existing data compression and uploading methods, the proposed data upload methods has better energy saving effect in different network scenarios.


Author(s):  
Syed Umar ◽  
P.V.R. D Prasada Rao ◽  
Sridevi Gutta

Today the wireless sensor networks (WSN) play a crucial role in wireless technology in various domains like military, medicine, communications etc. The energy conservation is the crucial factor in the WSN. The WSN is a system which has more number of nodes in which various sensors are fabricated on the nodes to monitor various factors of the given task. These nodes will form a network by connecting the one to other for the effective communication between the nodes, and sends the whole information to the base station (BS). As the nodes which we use for the WSN are of low cost and are battery operated. The main drawback is replacement of the battery in the WSN. The main goal is to conserve the energy consumption in WSN and also to balance the load on WSN. For this many protocols are designed like LEACH, PEGASIS, PEDAP, etc. in those balancing the load and time delayed. some drawbacks are there. So we proposed a protocol so called “Tree Based Energy Balancing routing Protocol by Self Organizing” (TEBRSO), in which instead of routing tables a routing tree will be used for routing from nodes to base station (BS), which chooses one root/control node for the broadcasting messages to the selected sensor nodes. By this protocol we can save the energy consumption in WSN and can extend the life time of it. The performance of this protocol is better when we compare with other energy saving protocols.


Sign in / Sign up

Export Citation Format

Share Document